SIST EN 474-1:2000/A1:2000
(Amendment)Earth-moving machinery - Safety - Part 1: General requirements - Amendment A1
Earth-moving machinery - Safety - Part 1: General requirements - Amendment A1
Erdbaumaschinen - Sicherheit - Teil 1: Allgemeine Anforderungen
Engins de terrassement - Sécurité - Partie 1: Exigences générales
Earth-moving machinery - Safety - Part 1: General requirements - Amendment A1
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 474-1:2000/A1:2000
01-april-2000
Earth-moving machinery - Safety - Part 1: General requirements - Amendment A1
Earth-moving machinery - Safety - Part 1: General requirements - Amendment A1
Erdbaumaschinen - Sicherheit - Teil 1: Allgemeine Anforderungen
Engins de terrassement - Sécurité - Partie 1: Exigences générales
Ta slovenski standard je istoveten z: EN 474-1:1994/A1:1998
ICS:
53.100 Stroji za zemeljska dela Earth-moving machinery
SIST EN 474-1:2000/A1:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razm
...
This May Also Interest You
This document provides vocabulary and an identification structure for classifying earth-moving
machinery designed to perform the following operations:
— excavation;
— loading;
— transportation;
— drilling, spreading, compacting or trenching of earth, rock and other materials, during work, for
example, on roads and dams, in quarries and mines and on building sites.
The purpose of this document is to provide a clear means to identify earth-moving machinery according
to its function and design configurations which can include additional classifications according to its
operating mass and control operator configuration.
Annex A provides a procedure based on the identification structure used by this document to classify
the machinery and introduce detailed identifications consistent with the logic implied by the structure.
Annex B provides a hierarchy of the operator control configurations for earth-moving machinery
- Standard23 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft19 pagesEnglish languagesale 10% offe-Library read for×1 day
This part of EN ISO 19014 specifies general principles for the development and testing of safety‐related parts of machine‐control systems (MCS) in earth‐moving machinery and its equipment, as defined in EN ISO 6165.
- Standard51 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft41 pagesEnglish languagesale 10% offe-Library read for×1 day
- 30-Nov-2019
- 19-Jul-2022
- 53.100
- 2006/42/EC
- M/396
- I13
This document together with EN 474 1:2022 deals with all significant hazards, hazardous situations and events relevant to hydraulic excavators when used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A) associated with the whole lifetime of the machine as described in EN ISO 12100:2010, 5.4.
The requirements of this document are complementary to the common requirements formulated in EN 474 1:2022. This document does not repeat the requirements of EN 474 1:2022 but supplements or modifies the requirements for hydraulic excavators.
This document does not provide requirements for main electrical circuits and drives of machinery when the primary source of energy is an external electrical supply.
The following significant and relevant hazards are not covered in this document:
— Laser;
— Lightning.
This document does not provide performance requirements for safety related functions of control system(s).
This document does not deal with towing of trailers.
This document does not deal with demolition machinery.
This document also deals with lifting operation application, shovel application, log application, grapple application, and magnetic plate application.
This document is not applicable to hydraulic excavators which are manufactured before the date of publication of this document by CEN.
- Corrigendum2 pagesEnglish languagesale 10% offe-Library read for×1 day
- 11-Jul-2022
- 53.100
- 2006/42/EC
- M/396
- I13
This document together with EN 474 1:2022 deals with all significant hazards, hazardous situations and events relevant to loaders when used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A) associated with the whole lifetime of the machine as described in EN ISO 12100:2010, 5.4.
The requirements of this document are complementary to the common requirements formulated in EN 474 1:2022. This document does not repeat the requirements of EN 474 1:2022 but supplements or modifies the requirements for loaders.
This document does not provide requirements for main electrical circuits and drives of machinery when the primary source of energy is an external electrical supply.
This document does not provide performance requirements for safety related functions of control system(s).
The following significant and relevant hazards are not covered in this document:
— Laser;
— Lightning.
This document does not deal with towing of trailers.
This document does not deal with demolition machinery.
This part also deals with fork application, log handling application, single heavy object handling application and lifting operation application.
This document is not applicable to loaders which are manufactured before the date of publication of this document by CEN.
NOTE For travelling on public roads, national traffic regulations apply (e.g. braking, steering, lighting, towing, etc.) until harmonized requirements are available.
- Corrigendum2 pagesEnglish languagesale 10% offe-Library read for×1 day
- 11-Jul-2022
- 53.100
- 2006/42/EC
- M/396
- I13
This European Standard specifies the general safety requirements for loaders, described in EN ISO 6165:2012.
This part also deals with fork application, single heavy object handling application, object handling application and log handling.
The requirements of this part are complementary to the common requirements formulated in
prEN 474-1:2017.
This part does not repeat the requirements from prEN 474-1:2017, but adds or replace the requirements for application for loaders.
This European Standard deals with all significant hazards, hazardous situations and events relevant to earth-moving machinery, when used as intended and under conditions foreseen but also taking into account any reasonably foreseeable misuse thereof (see Clause 4). This European Standard specifies the appropriate technical measures to reduce risks arising from the significant hazards, hazardous situations and events during the whole foreseeable lifecycle of the machinery.
This European Standard is not applicable to earth-moving machinery, which are manufactured before the date of publication of this European Standard by CEN.
NOTE For travelling on public roads, national traffic regulations apply (e.g. braking, steering, lighting, towing etc.) until harmonised requirements are available.
- Standard22 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft11 pagesEnglish languagesale 10% offe-Library read for×1 day
- 21-Jun-2017
- 11-Apr-2022
- 53.100
- 2006/42/EC
- M/396
- I13
This document, together with part 1, deals with all significant hazards for earth-moving machinery - rollers when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in prEN 474-1. This document does not repeat the requirements from prEN 474-1, but adds or replaces the requirements for application for earth moving machinery - rollers.
This part of prEN 474 is not applicable for seated ride-on operated rollers with a drum width less than nominal 0,8 m.
- Standard55 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft47 pagesEnglish languagesale 10% offe-Library read for×1 day
- 21-Jun-2017
- 11-Apr-2022
- 53.100
- 2006/42/EC
- I13
This document, together with part 1, deals with all significant hazards for earth-moving machinery - cable-excavators (as defined in EN ISO 6165) when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
This European Standard applies also to cable excavators, their undercarriage and upper-structure, if intended for use in combination with other equipment or attachment, such as lifting operation, extracting equipment and moving equipment (e.g. rail track, walking legs, pontoon, ship) or stationary undercarriage. Drilling and foundation equipment (covered by EN 16228 parts 1-7:2014) are not dealt with in this standard.
The requirements of this part are complementary to the common requirements formulated in
prEN 474-1. This document does not repeat the requirements from prEN 474-1, but adds or replaces the requirements for application for earth moving machinery - cable-excavators.
- Standard45 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft32 pagesEnglish languagesale 10% offe-Library read for×1 day
- 21-Jun-2017
- 11-Apr-2022
- 53.100
- 2006/42/EC
- M/396
- I13
This part of prEN 474 deals with all significant hazards, hazardous situations and events relevant to wheel and crawler backhoe loaders as defined in EN ISO 6165:2012.
This part also deals with fork application, lifting operations and log handling.
The requirements of this part are complementary to the common requirements formulated in prEN 474-1:2017.
This does not repeat the requirements from prEN 474-1:2017, but adds or replaces the requirements for application for backhoe loaders.
This European Standard deals with all significant hazards, hazardous situations and events relevant to earth-moving machinery, when used under the conditions foreseen but also taking into account any reasonable foreseeable misuse thereof (see Clause 4). This European Standard specifies the appropriate technical measures to reduce risks arising from the significant hazards, hazardous situations and events during the whole foreseeable lifecycle of the machinery.
This European Standard is not applicable to machinery manufactured before the date of publication of this European Standard by CEN.
NOTE For travelling on public roads, national traffic regulations apply (e.g. braking, steering, lighting, towing, etc.) until harmonised requirements are available.
- Standard30 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft26 pagesEnglish languagesale 10% offe-Library read for×1 day
- 21-Jun-2017
- 11-Apr-2022
- 53.100
- 2006/42/EC
- M/396
- I13
This document, together with part 1, deals with all significant hazards for earth-moving machinery - earth- and landfill compactors when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in
prEN 474-1. This document does not repeat the requirements from prEN 474-1, but adds or replaces the requirements for application for earth moving machinery - earth- and landfill compactors.
Rammer compactors and vibratory plates are dealt with in EN 500-1 and EN 500-4.
This European Standard is not applicable to earth- and landfill compactors manufactured before the date of publication of this European Standard by CEN.
- Standard27 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft16 pagesEnglish languagesale 10% offe-Library read for×1 day
- 21-Jun-2017
- 11-Apr-2022
- 53.100
- 2006/42/EC
- M/396
- I13
This document, together with part 1, deals with all significant hazards for earth-moving machinery - hydraulic excavators when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in
prEN 474-1. This document does not repeat the requirements from prEN 474-1, but adds or replaces the requirements for application for earth moving machinery - hydraulic excavators.
This part also deals with derivated machinery and derivated use, e.g. lifting operation application, shovel application, log application, grapple application, magnetic plate application.
This European Standard is not applicable to hydraulic excavators manufactured before the date of publication of this European Standard by CEN.
- Standard44 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft32 pagesEnglish languagesale 10% offe-Library read for×1 day
- 21-Jun-2017
- 11-Apr-2022
- 53.100
- 2006/42/EC
- M/396
- I13
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.