Glass packaging - Screw finishes for pressure capsules - Part 1: Returnable glass MCA 1 finish

EN 16287-1 specifies the dimensions of the 28 mm screw finish for glass containers designated MCA 1 for returnable glass.

Verpackungen aus Glas - Schraubmundstücke für Flaschen mit Innendruck - Teil 1: Mehrwei- MCA 1-Mundstück

Diese Europäische Norm legt die Maße des 28-mm-Schraubmundstückes für Mehrweg-Behältnisse aus Glas, bezeichnet mit MCA 1, fest.

Emballage en verre - Bagues à vis pour capsules à pression - Partie 1: Bague MCA 1 pour verre consigné

La présente Norme européenne spécifie les dimensions de la bague à vis de 28 millimètres pour récipients en
verre consigné désignée sous l'appellation bague MCA 1 pour verre consigné.

Steklena embalaža - Grla z navojem za steklenice pod tlakom - 1. del: Vračljiva steklena grla MCA 1

Standard EN 16287-1 določa mere za 28-mm grla z navojem za steklene posode MCA 1 za vračljive steklenice.

General Information

Status
Published
Public Enquiry End Date
30-Sep-2013
Publication Date
08-Jun-2014
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
29-May-2014
Due Date
03-Aug-2014
Completion Date
09-Jun-2014

RELATIONS

Buy Standard

Standard
SIST EN 16287-1:2014
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Verpackungen aus Glas - Schraubmundstücke für Flaschen mit Innendruck - Teil 1: Mehrwei- MCA 1-MundstückEmballage en verre - Bagues à vis pour capsules à pression - Partie 1: Bague MCA 1 pour verre consignéGlass packaging - Screw finishes for pressure capsules - Part 1: Returnable glass MCA 1 finish55.100Steklenice. Lonci. KozarciBottles. Pots. JarsICS:Ta slovenski standard je istoveten z:EN 16287-1:2014SIST EN 16287-1:2014en,fr,de01-julij-2014SIST EN 16287-1:2014SLOVENSKI

STANDARD
SIST EN 16287-1:2014
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16287-1
March 2014 ICS 55.100 English Version

Glass packaging - Screw finishes for pressure capsules - Part 1: Returnable glass MCA 1 finish

Emballage en verre - Bagues à vis pour capsules à pression - Partie 1: Bague MCA 1 pour verre consigné

Verpackungen aus Glas - Schraubmundstücke für Flaschen mit Innendruck - Teil 1: Mehrweg-MCA 1-(Glas-)MundstückThis European Standard was approved by CEN on 12 January 2014.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,

B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16287-1:2014 ESIST EN 16287-1:2014

EN 16287-1:2014 (E) 2 Contents

Page Foreword ..............................................................................................................................................................3 Introduction .........................................................................................................................................................4 1 Scope ......................................................................................................................................................4 2 Terms and definitions ...........................................................................................................................4 3 Dimensions .............................................................................................................................................4 Bibliography ........................................................................................................................................................9

SIST EN 16287-1:2014

EN 16287-1:2014 (E) 3 Foreword This document (EN 16287-1:2014) has been prepared by Technical Committee CEN/TC 261 “Packaging”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2014 and conflicting national standards shall be withdrawn at the latest by Septembe

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.