SIST EN IEC 62343-1:2019

Dynamic modules - Part 1: Performance standards - General conditions (IEC 62343-1:2019)

IEC 62343-1:2016(E) provides a performance standard of general conditions for dynamic modules. All dynamic modules should satisfy required performance defined in individual performance standards on the general conditions defined in this document. Additional conditions may be included in individual performance standards.
Keywords: dynamic modules

Dynamische Module - Teil 1: Betriebsverhaltensnorm - Allgemeine Bedingungen (IEC 62343-1:2019)

Modules dynamiques - Partie 1: Normes de performance - Conditions générales (IEC 62343-1:2019)

IEC 62343-1:2016 fournit une norme de performance sur les conditions générales pour des modules dynamiques. Il convient que tous les modules dynamiques satisfassent aux performances exigées définies dans des normes de performance individuelles sur les conditions générales définies dans le présent document. Des conditions complémentaires peuvent être incluses dans des normes de performance individuelles.
Mots clés: modules dynamiques

Dinamični moduli - 1. del: Tehnični standardi - Splošni pogoji (IEC 62343-1:2019)

IEC 62343-1:2016(E) zagotavlja tehnični standard splošnih pogojev za dinamične module. Vsi dinamični moduli morajo ustrezati zahtevani zmogljivosti, ki je opredeljena v posameznih tehničnih standardih v zvezi s splošnimi pogoji, določenimi v tem dokumentu. Posamezni tehnični standardi lahko vključujejo dodatne pogoje.
Ključne besede: dinamični moduli

General Information

• Status: Published
• Publication Date: 14-May-2019
• ICS: 33.180.01 - Fibre optic systems in general
• Technical Committee: MOC - Mobile Communications
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 10-May-2019
• Due Date: 15-Jul-2019
• Completion Date: 15-May-2019
• Ref Project: EN IEC 62343-1:2019 - Dynamic modules - Part 1: Performance standards - General conditions

Relations

• Revised: SIST EN 62343-1:2016 - Dynamic modules - Part 1: Performance standards - General conditions (IEC 62343-1:2016)
• Effective Date: 23-Jan-2018
• Replaces: SIST EN 62343-1:2016 - Dynamic modules - Part 1: Performance standards - General conditions (IEC 62343-1:2016)
• Effective Date: 30-Apr-2019
• Amended By: SIST EN IEC 62343-1:2019/oprA1:2023 - Amendment 1 - Dynamic modules - Part 1: Performance standards - General conditions
• Effective Date: 13-Dec-2022
• Replaces: SIST EN 62343-1:2016 - Dynamic modules - Part 1: Performance standards - General conditions (IEC 62343-1:2016)
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62343-1:2019
01-julij-2019
Nadomešča:
SIST EN 62343-1:2016
Dinamični moduli - 1. del: Tehnični standardi - Splošni pogoji (IEC 62343-1:2019)
Dynamic modules - Part 1: Performance standards - General conditions (IEC 62343-
1:2019)
Dynamische Module - Teil 1: Betriebsverhaltensnorm - Allgemeine Bedingungen (IEC
62343-1:2019)
Modules dynamiques - Partie 1: Normes de performance - Conditions générales (IEC
62343-1:2019)
Ta slovenski standard je istoveten z: EN IEC 62343-1:2019
ICS:
33.180.01 Sistemi z optičnimi vlakni na Fibre optic systems in
splošno general
SIST EN IEC 62343-1:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN IEC 62343-1:2019

---------------------- Page: 2 ----------------------

SIST EN IEC 62343-1:2019


EUROPEAN STANDARD EN IEC 62343-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
April 2019
ICS 33.180.01; 33.180.99 Supersedes EN 62343-1:2016
English Version
Dynamic modules - Part 1: Performance standards - General
conditions
(IEC 62343-1:2019)
Modules dynamiques - Partie 1: Normes de performance - Dynamische Module - Teil 1: Betriebsverhaltensnorm -
Conditions générales Allgemeine Bedingungen
(IEC 62343-1:2019) (IEC 62343-1:2019)
This European Standard was approved by CENELEC on 2019-03-13. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 63093-13:2019 E

---------------------- Page: 3 ----------------------

SIST EN IEC 62343-1:2019
EN IEC 62343-1:2019 (E)
European foreword
The text of document 86C/1518/CDV, future edition 2 of IEC 62343-1, prepared by SC 86C "Fibre
optic systems and active devices" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN IEC 62343-1:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2019-12-13
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-03-13
document have to be withdrawn

This document supersedes EN 62343-1:2016, of which it constitutes a technical revision.
This edition includes the following technical changes with respect to the previous edition:

a) errors in Table 1 have been corrected
b) the content of Table A.1 has been revised.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 62343-1:2019 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 62343 NOTE Harmonized as EN 62343
IEC 62343-1-2 NOTE Harmonized as EN 62343-1-2
IEC 62343-1-3 NOTE Harmonized as EN 62343-1-3
IEC 62343-2 NOTE Harmonized as EN 62343-2


2

---------------------- Page: 4 ----------------------

SIST EN IEC 62343-1:2019
EN IEC 62343-1:2019 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.

Publication Year Title EN/HD Year
IEC 62343 -  Dynamic modules – General and guidance EN 62343 -
IEC/TS 62538 -  Categorization of optical devices - -
ITU-T -  Optical system design and engineering - -
Recommendation considerations
G.Sup39

3

---------------------- Page: 5 ----------------------

SIST EN IEC 62343-1:2019

---------------------- Page: 6 ----------------------

SIST EN IEC 62343-1:2019



IEC 62343-1

®


Edition 2.0 2019-02




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE











Dynamic modules –

Part 1: Performance standards – General conditions




Modules dynamiques –

Partie 1: Normes de performance – Conditions générales
















INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 33.180.01; 33.180.99 ISBN 978-2-8322-6508-6



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN IEC 62343-1:2019
– 2 – IEC 62343-1:2019 © IEC 2019
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Requirements of operating conditions . 6
5 Requirements of operating wavelength range (spectral band) . 7
Annex A (informative) Recommendations for other conditions on product
specifications . 8
A.1 Storage environmental conditions . 8
A.2 Absolute maximum ratings . 8
Bibliography . 9

Table 1 – Operating conditions . 7
Table 2 – Spectral bands . 7
Table A.1 – Typical storage environmental conditions . 8
Table A.2 – Recommended absolute maximum rating items . 8

---------------------- Page: 8 ----------------------

SIST EN IEC 62343-1:2019
IEC 62343-1:2019 © IEC 2019 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

DYNAMIC MODULES –

Part 1: Performance standards – General conditions

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters ex
...