SIST EN 60404-4:2002/A1:2004
(Amendment)Magnetic materials -- Part 4: Methods of measurement of d.c. magnetic properties of magnetically soft materials
Magnetic materials -- Part 4: Methods of measurement of d.c. magnetic properties of magnetically soft materials
Magnetische Werkstoffe -- Teil 4: Verfahren zur Messung der magnetischen Eigenschaften von weichmagnetischen Werkstoffen im Gleichfeld
Matériaux magnétiques -- Partie 4: Méthodes de mesure en courant continu des propriétés magnétiques des matériaux magnétiquement doux
Magnetic materials - Part 4: Methods of measurement of d.c. magnetic properties of magnetically soft materials - Amendment A1 (IEC 60404-4:1995/A1:2000)
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 60404-4:2002/A1:2004
STANDARD
julij 2004
Magnetic materials - Part 4: Methods of measurement of d.c. magnetic properties of
magnetically soft materials - Amendment A1 (IEC 60404-4:1995/A1:2000)
ICS 29.030 Referenčna številka
SIST EN 60404-4:2002/A1:2004(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 60404-4/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM April 2002
ICS 17.220.20; 29.030
English version
Magnetic materials
Part 4: Methods of measurement of d.c. magnetic properties
of magnetically soft materials
(IEC 60404-4:1995/A1:2000)
Matériaux magnétiques Magnetische Werkstoffe
Partie 4: Méthodes de mesure en courant Teil 4: Verfahren zur Messung
continu des propriétés magnétiques der magnetischen Eigenschaften
des matériaux magnétiquement doux von weichmagnetischen Werkstoffen
(CEI 60404-4:1995/A1:2000) im Gleichfeld
(IEC 60404-4:1995/A1:2000)
This amendment A1 modifies the European Standard EN 60404-4:1997; it was approved by CENELEC
on 2001-12-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this amendment the status of a national standard without any
alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,
Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60404-4:1997/A1:2002 E
---------------------- Page: 2 ----------------------
EN 60404-4:1997/A1:2002 - 2 -
Foreword
The text of amendment 1:2000 to the International Standard IEC 60404-4:1995, prepared by IEC TC 68,
Magnetic alloys and steels, was submitted to the Unique Acceptance Procedure and was approved by
CENELEC as amendment A1 to EN 60404-4:1997 on 2001-12-01 without any modification.
The following dates were fixed:
– latest date b
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.