Cold applied joint sealants - Part 8: Test method for the determination of the artificial weathering by UV-irradiation

This European Standard describes a test method for evaluating the resistance of cold applied joint sealants to the action of UV-light by determination of the change of physical properties after irradiation by artificial UV-light.

Kalt verarbeitbare Fugenmassen - Teil 8: Prüfverfahren zur Bestimmung der künstlichen Bewitterung durch UV-Bestrahlung

Diese Europäische Norm beschreibt ein Prüfverfahren zur Bewertung der Beständigkeit von kalt verarbeitbaren Fugenmassen bei Einwirkung von UV Licht, wobei die Änderung physikalischer Eigenschaften nach Bestrahlung mit künstlichem UV Licht bestimmt wird.

Mastics pour joints appliqués a froid - Partie 8: Méthodes d'essai pour la détermination du vieillissement artificiel par rayonnement UV

La présente Norme européenne décrit une méthode d'évaluation de la résistance des mastics pour joints appliqués a froid a l'action des UV en déterminant les modifications subies par leurs propriétés physiques apres exposition a une source artificielle de lumiere UV.

Hladno nanosljive tesnilne mase za stike – 8. del: Preskusna metoda za ugotavljanje umetnega staranja z ultravijoličnim sevanjem

General Information

Status
Withdrawn
Publication Date
31-May-2004
Withdrawal Date
11-Apr-2017
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
11-Apr-2017
Due Date
04-May-2017
Completion Date
12-Apr-2017

Relations

Buy Standard

Standard
EN 14187-8:2004
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kalt verarbeitbare Fugenmassen - Teil 8: Prüfverfahren zur Bestimmung der künstlichen Bewitterung durch UV-BestrahlungMastics pour joints appliqués a froid - Partie 8: Méthodes d'essai pour la détermination du vieillissement artificiel par rayonnement UVCold applied joint sealants - Part 8: Test method for the determination of the artificial weathering by UV-irradiation93.080.20Materiali za gradnjo cestRoad construction materials91.100.50Veziva. Tesnilni materialiBinders. Sealing materialsICS:Ta slovenski standard je istoveten z:EN 14187-8:2003SIST EN 14187-8:2004en01-junij-2004SIST EN 14187-8:2004SLOVENSKI
STANDARD



SIST EN 14187-8:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14187-8June 2003ICS 93.080.20English versionCold applied joint sealants - Part 8: Test method for thedetermination of the artificial weathering by UV-irradiationMastics pour joints appliqués à froid - Partie 8: Méthodesd'essai pour la détermination du vieillissement artificiel parrayonnement UVKalt verarbeitbare Fugenmassen - Teil 8: Prüfverfahren zurBestimmung der künstlichen Bewitterung durch UV-BestrahlungThis European Standard was approved by CEN on 25 March 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14187-8:2003 ESIST EN 14187-8:2004



EN 14187-8:2003 (E)2ContentspageForeword.31Scope.32Normative references.43Terms and definitions.44Principle.45Apparatus and materials.46Preparation of test specimens.57Conditioning.68Procedure.69Expression of results.710Test report.8SIST EN 14187-8:2004



EN 14187-8:2003 (E)3ForewordThis document (EN 14187-8:2003) has been prepared by Technical Committee CEN/TC 227 "Road materials", thesecretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by December 2003, and conflicting national standards shall be withdrawn at the latestby March 2005.This European Standard is one of a series of standards as listed below:EN 14187-1, Cold applied joint sealants — Part 1: Test method for the determination of the rate of cure.EN 14187-2, Cold applied joint sealants — Part 2: Test method for the determination of tack free time.EN 14187-3, Cold applied joint sealants — Part 3: Test method for the determination of self-levelling properties.EN 14187-4, Cold applied joint sealants — Part 4: Test method for the determination of the change in mass andvolume after immersion in test fuel.EN 14187-5, Cold applied joint sealants — Part 5: Test method for the determination of the resistance tohydrolysis.EN 14187-6, Cold applied joint sealants — Part 6: Test method for the determination of the adhesion/cohesionproperties after immersion in chemical liquids.EN 14187-7, Cold applied joint sealants — Part 7: Test method for the determination of the resistance to flame.EN 14187-8, Cold applied joint sealants — Part 8: Test method for the determination of the artificial weathering byUV-irradiation.prEN 14187-9, Cold applied joint sealants — Part 9: Function test.1)No existing European Standard is superseded.WARNING — Attention is drawn to the health and safety at work and the need to ensure that this test iscarried out under suitable environmental conditions to provide adequate protection to persons against therisk of contact or inhalation of toxic products.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,Slovakia, Spain, Sweden, Switzerland and the United Kingdom.1 ScopeThis European Standard describes a test method for evaluating the resistance of cold applied joint sealants to theaction of UV-light by determination of the change of physical properties after irradiation by artificial UV-light.
1)In preparation.SIST EN 14187-8:2004



EN 14187-8:2003 (E)42 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.