SIST IEC 60839-2-5:1995

Alarm systems. Part 2: Requirements for intruder alarm systems. Section Five: Microwave Doppler detectors for use in buildings

Gives the specific requirements and test procedures for microwave Doppler detectors for use in intruder alarms systems installed in buildings. Specifies those requirements for microwave Doppler detectors which will ensure that they will perform satisfactorily and minimize false alarms. Should be used in conjunction with IEC 60839-1-1 and IEC 60839-2-2.

Systèmes d'alarme. Deuxième partie: Prescriptions pour les systèmes d'alarme anti-intrusion. Section cinq: Détecteurs hyperfréquence à effet Doppler-Fizeau utilisés dans les bâtiments

Donne les prescriptions spécifiques et les modalités d'essai relatives aux détecteurs hyperfréquences à effet Doppler utilisés dans les systèmes d'alarme anti-intrusion installés dans les bâtiments. Précise les prescriptions relatives aux détecteurs hyperfréquences à effet Doppler de façon à garantir leur bon fonctionnement et à minimiser les fausses alarmes. Doit être utilisé avec la CEI 60839-1-1 et la CEI 60839-2-2.

Alarm systems - Part 2: Requirements for intruder alarm systems - Section Five: Microwave doppler detectors for use in buildings

General Information

• Status: Published
• Publication Date: 31-Aug-1995
• ICS: 13.320 - Alarm and warning systems
• Technical Committee: EAL - Alarm systems
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Sep-1995
• Due Date: 01-Sep-1995
• Completion Date: 01-Sep-1995
• Ref Project: IEC 60811-503:2012 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 503: Mechanical tests - Shrinkage test for sheaths

Standards Content (Sample)

SLOVENSKI STANDARD
SIST IEC 60839-2-5:1995
01-september-1995
Alarm systems - Part 2: Requirements for intruder alarm systems - Section Five:
Microwave doppler detectors for use in buildings
Alarm systems. Part 2: Requirements for intruder alarm systems. Section Five:
Microwave Doppler detectors for use in buildings
Systèmes d'alarme. Deuxième partie: Prescriptions pour les systèmes d'alarme anti-
intrusion. Section cinq: Détecteurs hyperfréquence à effet Doppler-Fizeau utilisés dans
les bâtiments
Ta slovenski standard je istoveten z: IEC 60839-2-5
ICS:
13.320 Alarmni in opozorilni sistemi Alarm and warning systems
SIST IEC 60839-2-5:1995 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST IEC 60839-2-5:1995

---------------------- Page: 2 ----------------------

SIST IEC 60839-2-5:1995
NORME CEI
INTERNATIONALE IEC
60839-2-5
INTERNATIONAL
Première édition
STAN DARD
First edition
1990-07
Systèmes d'alarme
Partie 2:
Prescriptions pour les systèmes d'alarme
anti-intrusion
Section 5 – Détecteurs hyperfréquence à effet
Doppler-Fizeau utilisés dans les bâtiments
Alarm systems
Part 2:
Requirements for intruder alarm systems
Section 5 – Microwave Doppler detectors
for use in buildings
© IEC 1990 Droits de reproduction réservés — Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni
No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun any form or by any means, electronic or mechanical,
procédé, électronique ou mécanique, y compris la photo- including photocopying and microfilm, without permission in
copie et les microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: [phone] e-mail: [e-mail] IEC web site http: //www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
PRICE CODE
International Electrotechnical Commission
IEC
Me nyHapogHaa 3neuSrporexHNVecitaR KoMNCcHS
Pour prix, voir catalogue en vigueur
• •
For price, see current catalogue

---------------------- Page: 3 ----------------------

SIST IEC 60839-2-5:1995
839-2-5 © C - 3
IE
CONTENTS
Page
5
FOREWORD
5
PREFACE
Clause
1. Scope 7
2. Normative references 7
Definitions 9
3.
9
4. General considerations
11
5. Requirements
6. Test procedures 15

---------------------- Page: 4 ----------------------

SIST IEC 60839-2-5:1995
839-2-5 © I EC - 5
INTERNATIONAL ELECTROTECHNICAL COMMISSION
ALARM SYSTEMS
Part 2: Requirements for intruder alarm systems
Section 5 - Microwave Doppler detectors for
use in buildings
FOREWORD
1)
The formal decisions or agreements of the IEC on technical matters,
prepared by Technical Committees on which all the National Committees
having a special interest therein are represented, express, as nearly
as possible, an international consensus of opinion on the subjects
dealt with.
2)
They have the form of recommendations for international use and they
are accepted by the National Committees in that sense.
3)
In order to promote international unification, the IEC expresses the
wish that all National Committees should adopt the text of the IEC
recommendation for their national rules in so far as national condi-
tions will permit. Any divergence between the IEC recommendation and
the corresponding national rules should, as far as possible, be clearly
indicated in the latter.
PREFACE
This standard has been prepared by IEC Technical Committee No. 79:
Alarm systems.
The text of this standard is based upon the following documents:
Six Months' Rule Report on Voting
79(CO)26 79(CO)36
Full information on the voting for the approval of this standard can be
found in the Voting Report indicated in the above table.

---------------------- Page: 5 ----------------------

SIST IEC 60839-2-5:1995
839-2-5 © IEC -
7 -
ALARM SYSTEMS
Part 2: Requirements for intruder alarm systems
Section 5 - Microwave Doppler detectors for
use in buildings
1. Scope
This International Standard gives the specific requirements and test
procedures for microwave Doppler detectors for use in intruder alarm
systems installed in buildings.
This standard is an addition to the general requirements for detec-
tors for use in intruder alarm systems as specified in IEC Publi-
cation 839-2-2, and it shall also be used in conjunction with the
standard for general requirements for alarm systems, IEC Publica-
tion 839-1-1.
The object of this standard is to specify those requirements for
microwave Doppler detectors which will ensure that they will perform
satisfactorily and minimize false alarms.
2.
Normative references
The following standards contain provisions which, through reference
in this text, constitute provisions of this Internatinal Standard. At the
time of publication, the editions indicated were valid. All standards are
subject to revision, and parties to agreements based on this Inter-
national Standard are encouraged to investigate the possibility of
applying the most recent editions of the standards indicated below.
Members of IEC and ISO maintain registers of currently valid Inter-
national Standards.
IEC Publications:
68-1 (1988): Environmental testing, Part 1: General and guidance.
839-1-1 (1988): Alarm systems, Part 1: General requirements. Section
One - General.
839-1-3 (1988): Section Three - Environmental testing.
839-2-2 (1987): Part 2: Requirements for intruder alarm systems.
Section Two - Requirements for detectors - General.

---------------------- Page: 6 ----------------------

SIST IEC 60839-2-5:1995

839-2-5 © IEC
- 9
3. Definitions
For the purpose of this standard the following definitions apply in
addition to those given in the general requirements.
3.1
Microwave Doppler detector
A detector which generates an alarm condition in response to the
frequency shift of the reflection of microwave radiation from a moving
person.
3.2 Sensor
The transmitting and receiving elements of the detector.
3.3 Microwave radiation
Electromagnetic radiation with a frequency above 1
GHz.
3.4 Reference target
A person weighing between 50 kg and 70 kg and between 165 cm and
180 cm in height, wearing a cotton overall.
3.5
Boundary of detection coverage
The furthest radial distances in all directions at which a reference
target moving towards the detector will generate an alarm condition.
3.6 Detection ranges
The detection ranges for given directions are the radial distances
from the detector to the boundary of detection coverage.
4. General considerations
The detector shall consist of one or more sensors and a processor.
Each sensor shall be contained in one housing which may also include
the processor. Where facilities are included to permit more than one
sensor to be connected to the processor, the tests required under
Clause 6 shall be carried out with one sensor only.
The detectors may have means incorporated to vary the shape of the
boundary of coverage. Where such means are incorporated the tests
required under Clause 6 shall be carried out with the normal equip-
ment and setting but additional tests shall be carried out to prove the
manufacturer's claims for the effects of these means.

---------------------- Page: 7 ----------------------

SIST IEC 60839-2-5:1995
839-2-5 © IEC - 11 -
5.
Requirements
5.1
Functional
5.1.1 Frequency
The operating frequency of the detector shall be not less than
1 GHz.
5.1.2
Boundary of detection coverage
The boundary of detection coverage achieved for any detector at
maximum range setting shall be at least equal to but not more than 25%
greater than that given in the manufacturer's specification.
5.1.3
Signal processing
The detector shall generate an alarm condition as a result of the
reference target moving towards the detector and within the boundary
of detection cover
...

IEC 60811-503
®

Edition 1.0 2012-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE


Electric and optical fibre cables – Test methods for non-metallic materials –
Part 503: Mechanical tests – Shrinkage test for sheaths

Câbles électriques et à fibres optiques – Méthodes d’essai pour les matériaux
non-métalliques –
Partie 503: Essais mécaniques – Essai de rétraction des gaines

IEC 60811-503:2012

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2012 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.


Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les
microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office Tel.: [phone]
3, rue de Varembé Fax: [phone]
CH-1211 Geneva 20 [e-mail]
Switzerland www.iec.ch

About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

Useful links:

IEC publications search - www.iec.ch/searchpub Electropedia - www.electropedia.org
The advanced search enables you to find IEC publications The world's leading online dictionary of electronic and
by a variety of criteria (reference number, text, technical electrical terms containing more than 30 000 terms and
committee,…). definitions in English and French, with equivalent terms in
It also gives information on projects, replaced and additional languages. Also known as the International
withdrawn publications. Electrotechnical Vocabulary (IEV) on-line.

IEC Just Published - webstore.iec.ch/justpublished Customer Service Centre - webstore.iec.ch/csc
Stay up to date on all new IEC publications. Just Published If you wish to give us your feedback on this publication
details all new publications released. Available on-line and or need further assistance, please contact the
also once a month by email. Customer Service Centre: [e-mail].


A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.

Liens utiles:

Recherche de publications CEI - www.iec.ch/searchpub Electropedia - www.electropedia.org
La recherche avancée vous permet de trouver des Le premier dictionnaire en ligne au monde de termes
publications CEI en utilisant différents critères (numéro de électroniques et électriques. Il contient plus de 30 000
référence, texte, comité d’études,…). termes et définitions en anglais et en français, ainsi que
Elle donne aussi des informations sur les projets et les les termes équivalents dans les langues additionnelles.
publications remplacées ou retirées. Egalement appelé Vocabulaire Electrotechnique
International (VEI) en ligne.
Just Published CEI - webstore.iec.ch/justpublished
Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications de la CEI.
Just Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur
Disponible en ligne et aussi une fois par mois par email. cette publication ou si vous avez des questions
contactez-nous: [e-mail].

---------------------- Page: 2 ----------------------
IEC 60811-503

®


Edition 1.0 2012-03




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE











Electric and optical fibre cables – Test methods for non-metallic materials –

Part 503: Mechanical tests – Shrinkage test for sheaths




Câbles électriques et à fibres optiques – Méthodes d’essai pour les matériaux

non-métalliques –

Partie 503: Essais mécaniques – Essai de rétraction des gaines















INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE

PRICE CODE
INTERNATIONALE

CODE PRIX H


ICS 29.035.01; 29.060.20 ISBN 978-2-88912-977-5



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 3 ----------------------
– 2 – 60811-503  IEC:2012
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Test method . 6
4.1 General . 6
4.2 Test equipment . 6
4.3 Sampling . 6
4.4 Preparation of test pieces . 6
4.5 Test procedure . 7
4.6 Expression of results . 7
5 Test report. 7
Bibliography . 8

---------------------- Page: 4 ----------------------
60811-503  IEC:2012 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

ELECTRIC AND OPTICAL FIBRE CABLES –
TEST METHODS FOR NON-METALLIC MATERIALS –

Part 503: Mechanical tests –
Shrinkage test for sheaths


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60811-503 has been prepared by IEC technical committee 20:
Electrical cables.
This Part 503 of IEC 60811 cancels and replaces Clause 11 of IEC 60811-1-3:1993, which is
withdrawn. Full details of the replacements are shown in Annex A of IEC 60811-100:2012.
There are no specific technical changes with respect to the previous edition, but see the
Foreword to IEC 60811-100: 2012.

---------------------- Page: 5 ----------------------
– 4 – 60811-503  IEC:2012
The text of this standard is based on the following documents:
FDIS Report on voting
20/1299/FDIS 20/1348/RVD

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
This part of IEC 60811 shall be used in conjunction with IEC 60811-100.
A list of all the parts in the IEC 60811 series, published under the general title Electric and
optical fibre cables – Test methods for non-metallic materials, can be found on the IEC
website.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

---------------------- Page: 6 ----------------------
60811-503  IEC:2012 – 5 –
INTRODUCTION
The IEC 60811 series specifies the test methods to be used for testing non-metallic materials
of all types of cables. These test methods are intended to be referenced in standards for
cable construction and for cable materials.
NOTE 1 Non-metallic materials are typically used for insulating, sheathing, bedding, filling or taping within cables.
NOTE 2 These test methods are accepted as basic and fundamental and have been developed and used over
many years principally for the materials in all energy cables. They have also been widely accepted and used for
other cables, in particular optical fibre cables, communication and control cables and cables for ships and offshore
applications.

---------------------- Page: 7 ----------------------
– 6 – 60811-503  IEC:2012
ELECTRIC AND OPTICAL FIBRE CABLES –
TEST METHODS FOR NON-METALLIC MATERIALS –

Part 503: Mechanical tests –
Shrinkage test for sheaths



1 Scope
This Part 503 of IEC 60811 gives the test method for the shrinkage for sheaths.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and
are indispensable for its application. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any
amendments) applies.
IEC 60811-100:2012, Electric and optical fibre cables – Test methods for non-metallic
materials – Part 100: General
3 Terms and definitions
For the purposes of this document, the terms and definitions given in IEC 60811-100 apply.
4 Test method
4.1 General
This part of IEC 60811 shall be used in conjunction with IEC 60811-100.
4.2 Test equipment
...