Graphic technology - Process control for the production of half-tone colour separations, proof and production prints - Part 7: Proofing processes working directly from digital data

ISO 12647-7:2013 specifies requirements for systems that are used to produce hard-copy digital proof prints intended to simulate a printing condition defined by a set of characterization data. Recommendations are provided with regard to appropriate test methods associated with these requirements.  
ISO 12647-7:2013 is independent of the method used to produce a digital proof print.

Technologie graphique - Contrôle des processus de confection de sélections couleurs tramées, d'épreuves et de tirages - Partie 7: Processus d'épreuve travaillant directement à partir de données numériques

Grafična tehnologija - Vodenje procesa izdelave rastriranih barvnih izvlečkov, preskusnih in proizvodnih odtisov - 7. del: Neposredni preskusni procesi z digitalnimi podatki

General Information

Status
Withdrawn
Publication Date
03-Feb-2014
Withdrawal Date
15-Mar-2017
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
15-Mar-2017
Due Date
07-Apr-2017
Completion Date
16-Mar-2017

Relations

Buy Standard

Standard
ISO 12647-7:2013 - Graphic technology -- Process control for the production of half-tone colour separations, proof and production prints
English language
22 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 12647-7:2014 - BARVE
English language
27 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ISO 12647-7:2013
Russian language
12 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


INTERNATIONAL ISO
STANDARD 12647-7
Second edition
2013-07-01
Graphic technology — Process
control for the production of half-
tone colour separations, proof and
production prints —
Part 7:
Proofing processes working directly
from digital data
Technologie graphique — Contrôle des processus de confection de
sélections couleurs tramées, d’épreuves et de tirages —
Partie 7: Processus d’épreuve travaillant directement à partir de
données numériques
Reference number
©
ISO 2013
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Requirements . 2
4.1 Data files, simulation of screens. 2
4.2 Proof print . 3
5 Test methods . 6
5.1 Control strip . 6
5.2 Additional test objects . 7
5.3 Colour measurement . 7
5.4 Measurement of tone values by tristimulus colourimeter or spectrocolourimeter . 8
5.5 Measurement of gloss . 8
5.6 Visual appraisal of proof-press-print matches . 8
Annex A (normative) Certification . 9
Annex B (normative) Rub resistance of the proof colourant .11
Annex C (normative) Outer gamut patches.14
Annex D (informative) Organisational certification routines for visual appraisal of proof-print
press-print matches .20
Bibliography .22
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2. www.iso.org/directives
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received. www.iso.org/patents
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
The committee responsible for this document is ISO/TC 130, Graphic technology.
This second edition cancels and replaces the first edition (ISO 12647-7:2007), of which it constitutes a
minor revision with the following changes:
— clear up the subject matter on certification issues to comply with the ISO requirements;
— update of references.
ISO 12647 consists of the following parts, under the general title Graphic technology — Process control
for the production of half-tone colour separations, proof and production prints:
— Part 1: Parameters and measurement methods
— Part 2: Offset lithographic processes
— Part 3: Coldset offset lithography on newsprint
— Part 4: Publication gravure printing
— Part 5: Screen printing
— Part 6: Flexographic printing
— Part 7: Proofing processes working directly from digital data
— Part 8: Validation print processes working directly from digital data
iv © ISO 2013 – All rights reserved

Introduction
ISO 12647-1 serves to provide definitions, the general principles, the general order, the material to be
covered in ISO 12647-2 to ISO 12647-7, the definition of the data, the measurement conditions, and the
reporting style.
This part of ISO 12647 relates to the subject of digital proofing and establishes proofing requirements
for the most stringent part of the printing and publishing market.
This part of ISO 12647 mainly lists values or sets of values, and their tolerances, of the primary parameters
specified in ISO 12647-1, especially for digital proof printing. Primary parameters that define a printing
condition include the screening parameters, where applicable, the colours of the solids, the colour of the
print substrate, colours intermediate between these and the tone value increase curve. Adherence to
these values essentially ensures that a grey, which at the colour separation stage was composed for a
particular printing condition, also prints as a grey colour in proofing and printing. Remaining deviations
from grey due to differences in trapping can then be removed by adjusting the colouration within the
tolerances provided. This part of ISO 12647 further specifies test methods for those properties of digital
proof prints and their substrates that are considered relevant for stable and reliable conditions, and
thus for a certification procedure.
The graphic technology industry makes extensive use of proofing to predict the rendering of digital
data files by a wide variety of high-definition, high-quality off-press printing processes and applications.
Each prediction is based on a characterisation data set that defines a particular printing condition.
Typically, the specified printing condition is defined through an International Color Consortium (ICC)
profile or the associated characterisation data set, both of which relate source data and colourimetrically
defined printed colour. Such data may be derived from printing conditions conforming to the pertinent
process standard of the ISO 12647 series by industry trade groups or individuals.
The purpose of a proof print is to simulate the visual characteristics of the finished production print
product as closely as possible. In order to visually match a particular printing condition, proofing
processes require a set of parameters to be specified that are not necessarily identical to those put
forward in ISO 12647-1 or another part of ISO 12647. This is caused by differences in colourant spectra
or phenomena such as gloss, light scatter (within the print substrate or the colourant), and transparency.
In such cases, it is also found that spectrocolourimetry takes precedence over densitometry.
Another problem area is the matching of a double-sided production print on a lightweight printing substrate,
such as often used in heat-set web and publication gravure printing, to a digital proof on a nearly opaque
substrate. If the proof was produced using a colour management profile based on measurements with white
backing, there will be an unavoidable visual and measurable difference between the proof on the one hand
and the production print placed on black on the other hand. A black backing is required for double-sided
production printing on non-opaque prints, as specified in the pertinent parts of ISO 12647. The possible
occurrence of such differences needs to be well communicated, in advance, to all parties concerned.
Historically, there has been no consistency in the way that either the characterisation data or the criteria
and limits for a satisfactory match have been provided. This has led to significant redundancy and
inconsistencies in the evaluation of proofing systems for different, but similar, applications, and a cost
and time burden on the industry. This International Standard therefore attempts to provide guidance in
this area by providing specifications and associated testing procedures.
Annex A gives the requirements for the digital proof prints listed in the main body of this part of
ISO 12647; these are weighted with respect to their relevance in two typical situations:
— requirements with which a proof print, made for a particular printing condition, must comply if it
is to be referenced in a contract between the printer and the provider of the digital data (“Certified
Proofing System”);
— requirements with which a vendor’s proofing system, comprising hardware and software, must
comply if it is to be considered capable of reliably producing digital contract proofs for a particular
printing condition (“Certified Proofing System”).
INTERNATIONAL STANDARD ISO 12647-7:2013(E)
Graphic technology — Process control for the production of
half-tone colour separations, proof and production prints —
Part 7:
Proofing processes working directly from digital data
1 Scope
This part of ISO 12647 specifies requirements for systems that are used to produce hard-copy
digital proof prints intended to simulate a printing condition defined by a set of characterisation
data. Recommendations are provided with regard to appropriate test methods associated with these
requirements.
This part of ISO 12647 is independent of the method used to produce a digital proof print.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
ISO 3664, Graphic technology and photography — Viewing conditions
ISO 8254-1, Paper and board — Measurement of specular gloss — Part 1: 75 degree gloss with a converging
beam, TAPPI method
ISO 12040, Graphic technology — Prints and printing inks — Assessment of light fastness using filtered
xenon arc light
ISO 12639, Graphic technology — Prepress digital data exchange — Tag image file format for image
technology (TIFF/IT)
ISO 12640-1, Graphic technology — Prepress digital data exchange — Part 1: CMYK standard colour image
data (CMYK/SCID)
ISO 12642-2, Graphic technology — Input data for characterization of 4-colour process printing — Part 2:
Expanded data set
ISO 12647-1:2004, Graphic technology — Process control for the production of half-tone colour separations,
proof and production prints — Part 1: Parameters and measurement methods
ISO 13655, Graphic technology — Spectral measurement and colorimetric computation for graphic arts images
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 12647-1 and the following apply.
3.1
digital proof
soft proof or hard-copy proof produced directly from digital data, on a display or a substrate
...


SLOVENSKI STANDARD
01-marec-2014
1DGRPHãþD
SIST ISO 12647-7:2008
*UDILþQDWHKQRORJLMD9RGHQMHSURFHVDL]GHODYHUDVWULUDQLKEDUYQLKL]YOHþNRY
SUHVNXVQLKLQSURL]YRGQLKRGWLVRYGHO1HSRVUHGQLSUHVNXVQLSURFHVL]
GLJLWDOQLPLSRGDWNL
Graphic technology - Process control for the production of half-tone colour separations,
proof and production prints - Part 7: Proofing processes working directly from digital data
Technologie graphique - Contrôle des processus de confection de sélections couleurs
tramées, d'épreuves et de tirages - Partie 7: Processus d'épreuve travaillant directement
à partir de données numériques
Ta slovenski standard je istoveten z: ISO 12647-7:2013
ICS:
37.100.01 *UDILþQDWHKQRORJLMDQD Graphic technology in
VSORãQR general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

INTERNATIONAL ISO
STANDARD 12647-7
Second edition
2013-07-01
Graphic technology — Process
control for the production of half-
tone colour separations, proof and
production prints —
Part 7:
Proofing processes working directly
from digital data
Technologie graphique — Contrôle des processus de confection de
sélections couleurs tramées, d’épreuves et de tirages —
Partie 7: Processus d’épreuve travaillant directement à partir de
données numériques
Reference number
©
ISO 2013
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Requirements . 2
4.1 Data files, simulation of screens. 2
4.2 Proof print . 3
5 Test methods . 6
5.1 Control strip . 6
5.2 Additional test objects . 7
5.3 Colour measurement . 7
5.4 Measurement of tone values by tristimulus colourimeter or spectrocolourimeter . 8
5.5 Measurement of gloss . 8
5.6 Visual appraisal of proof-press-print matches . 8
Annex A (normative) Certification . 9
Annex B (normative) Rub resistance of the proof colourant .11
Annex C (normative) Outer gamut patches.14
Annex D (informative) Organisational certification routines for visual appraisal of proof-print
press-print matches .20
Bibliography .22
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2. www.iso.org/directives
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received. www.iso.org/patents
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
The committee responsible for this document is ISO/TC 130, Graphic technology.
This second edition cancels and replaces the first edition (ISO 12647-7:2007), of which it constitutes a
minor revision with the following changes:
— clear up the subject matter on certification issues to comply with the ISO requirements;
— update of references.
ISO 12647 consists of the following parts, under the general title Graphic technology — Process control
for the production of half-tone colour separations, proof and production prints:
— Part 1: Parameters and measurement methods
— Part 2: Offset lithographic processes
— Part 3: Coldset offset lithography on newsprint
— Part 4: Publication gravure printing
— Part 5: Screen printing
— Part 6: Flexographic printing
— Part 7: Proofing processes working directly from digital data
— Part 8: Validation print processes working directly from digital data
iv © ISO 2013 – All rights reserved

Introduction
ISO 12647-1 serves to provide definitions, the general principles, the general order, the material to be
covered in ISO 12647-2 to ISO 12647-7, the definition of the data, the measurement conditions, and the
reporting style.
This part of ISO 12647 relates to the subject of digital proofing and establishes proofing requirements
for the most stringent part of the printing and publishing market.
This part of ISO 12647 mainly lists values or sets of values, and their tolerances, of the primary parameters
specified in ISO 12647-1, especially for digital proof printing. Primary parameters that define a printing
condition include the screening parameters, where applicable, the colours of the solids, the colour of the
print substrate, colours intermediate between these and the tone value increase curve. Adherence to
these values essentially ensures that a grey, which at the colour separation stage was composed for a
particular printing condition, also prints as a grey colour in proofing and printing. Remaining deviations
from grey due to differences in trapping can then be removed by adjusting the colouration within the
tolerances provided. This part of ISO 12647 further specifies test methods for those properties of digital
proof prints and their substrates that are considered relevant for stable and reliable conditions, and
thus for a certification procedure.
The graphic technology industry makes extensive use of proofing to predict the rendering of digital
data files by a wide variety of high-definition, high-quality off-press printing processes and applications.
Each prediction is based on a characterisation data set that defines a particular printing condition.
Typically, the specified printing condition is defined through an International Color Consortium (ICC)
profile or the associated characterisation data set, both of which relate source data and colourimetrically
defined printed colour. Such data may be derived from printing conditions conforming to the pertinent
process standard of the ISO 12647 series by industry trade groups or individuals.
The purpose of a proof print is to simulate the visual characteristics of the finished production print
product as closely as possible. In order to visually match a particular printing condition, proofing
processes require a set of parameters to be specified that are not necessarily identical to those put
forward in ISO 12647-1 or another part of ISO 12647. This is caused by differences in colourant spectra
or phenomena such as gloss, light scatter (within the print substrate or the colourant), and transparency.
In such cases, it is also found that spectrocolourimetry takes precedence over densitometry.
Another problem area is the matching of a double-sided production print on a lightweight printing substrate,
such as often used in heat-set web and publication gravure printing, to a digital proof on a nearly opaque
substrate. If the proof was produced using a colour management profile based on measurements with white
backing, there will be an unavoidable visual and measurable difference between the proof on the one hand
and the production print placed on black on the other hand. A black backing is required for double-sided
production printing on non-opaque prints, as specified in the pertinent parts of ISO 12647. The possible
occurrence of such differences needs to be well communicated, in advance, to all parties concerned.
Historically, there has been no consistency in the way that either the characterisation data or the criteria
and limits for a satisfactory match have been provided. This has led to significant redundancy and
inconsistencies in the evaluation of proofing systems for different, but similar, applications, and a cost
and time burden on the industry. This International Standard therefore attempts to provide guidance in
this area by providing specifications and associated testing procedures.
Annex A gives the requirements for the digital proof prints listed in the main body of this part of
ISO 12647; these are weighted with respect to their relevance in two typical situations:
— requirements with which a proof print, made for a particular printing condition, must comply if it
is to be referenced in a contract between the printer and the provider of the digital data (“Certified
Proofing System”);
— requirements with which a vendor’s proofing system, comprising hardware and software, must
comply if it is to be considered capable of reliably producing digital contract proofs for a particular
printing condition (“Certified Proofing System”).
INTERNATIONAL STANDARD ISO 12647-7:2013(E)
Graphic technology — Process control for the production of
half-tone colour separations, proof and production prints —
Part 7:
Proofing processes working directly from digital data
1 Scope
This part of ISO 12647 specifies requirements for systems that are used to produce hard-copy
digital proof prints intended to simulate a printing condition defined by a set of characterisation
data. Recommendations are provided with regard to appropriate test methods associated with these
requirements.
This part of ISO 12647 is independent of the method used to produce a digital proof print.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, th
...


МЕЖДУНАРОДНЫЙ ISO
СТАНДАРТ 12647-7
Второе издание
2013-07-01
Технология полиграфии. Контроль
процесса изготовления цифровых
файлов, растровых цветоделений
пробных и тиражных оттисков.
Часть 7.
Процессы получения пробных оттисков
непосредственно с цифровых данных
Graphic technology – Process control for the production of half-tone colour
separations, proof and production prints – Part 7: Proofing processes
working directly from digital data

Ответственность за подготовку русской версии несѐт GOST R
(Российская Федерация) в соответствии со статьѐй 18.1 Устава ISO

Ссылочный номер
ISO 12647:2013(R)
©
ISO 2013
ДОКУМЕНТ ЗАЩИЩЕН АВТОРСКИМ ПРАВОМ

©  ISO 2013
Все права сохраняются. Если не указано иное, никакую часть настоящей публикации нельзя копировать или использовать в какой-
либо форме или каким-либо электронным или механическим способом, включая фотокопии и микрофильмы, без предварительного
письменного согласия ISO, которое должно быть получено после запроса о разрешении, направленного по адресу, приведенному
ниже, или в комитет-член ISO в стране запрашивающей стороны.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Опубликовано в Швейцарии
ii © ISO 2013– Все права сохраняются

Содержание
Предисловие . iv
Введение . v
1 Область применения . 1
2 Нормативные ссылки . 1
3 Термины и определения . 2
4 Требования . 2
4.1 Цифровые файлы, моделирование растровых структур . 2
4.2 Пробный оттиск . 3
5 Методы тестирования . 7
5.1 Контрольная шкала . 7
5.2 Дополнительные тест-объекты . 8
5.3 Измерение цвета. 8
5.4 Измерение значений тона с помощью трѐхстимульного колориметра или
спектроколориметра . 9
5.5 Измерение глянца . 9
5.6 Визуальная оценка соответствия пробного и тиражного оттисков . 10
Приложение A (нормативное) Сертификация . 11
Приложение B (нормативное) Сопротивление истиранию красочного слоя пробы . 13
ПриложениеС (нормативное) Поля цветового охвата устройства вывода . 16
Приложение D (информативное) Порядок проведения визуальной оценки соответствия
пробного и тиражного оттисков . 22
Библиография . 24

Предисловие
Международная организация по стандартизации (ISO) представляет собой всемирную федерацию,
состоящую из национальных органов по стандартизации (комитеты-члены ISO). Работа по разработке
международных стандартов обычно ведется Техническими комитетами ISO. Каждый комитет-член,
заинтересованный в теме, для решения которой образован данный Технический комитет, имеет право
быть представленным в этом комитете. Международные организации, правительственные и
неправительственные, поддерживающие связь с ISO, также принимают участие в работе. Что касается
стандартизации в области электротехники, ISO тесно сотрудничает c Международной
электротехнической комиссией (IEC).
Процедуры, использованные для разработки данного документа, и процедуры его дальнейшей
актуализации описаны в Директивах ISO/IEC Directives, Часть 1. В частности, следует отметить
различные критерии утверждения, необходимые для различных типов документов ISO. Настоящий
документ был разработан в соответствии с редакционными правилами Директив ISO/IEC Directives,
Часть 2. www.iso.org/directives.
Следует обратить внимание на тот факт, что отдельные элементы данного документа могут являться
объектами патентного права. ISO не несет ответственность за идентификацию любых или всех
подобных патентных прав. Сведения о всех патентных правах, идентифицированных при разработке
данного документа, содержатся в разделе Введение и/или в перечне ISO полученных патентных
деклараций. www.iso.org/patents.
Любой торговый знак, использованный в данном документе, является информацией, приводимой для
удобства пользователей, и не является свидетельством в пользу того или иного товара.
Комитетом, несущим ответственность за данный документ, является Технический комитет
ISO/TC 130, Технология полиграфии.
Второе издание отменяет и заменяет первое издание (ISO 12647-7:2007),в которое внесены
следующие незначительные изменения:
– прояснение вопросов, касающихся сертификации, и подчинение их требованиям ISO;
– обновление ссылок.
ISO 12647 состоит из следующих частей, объединѐнных под общим заголовком: Технология
полиграфии. Контроль процесса изготовления цифровых файлов, растровых цветоделений,
пробных и тиражных оттисков:
– Часть 1. Параметры и методы измерений
– Часть 2. Процессы офсетной печати
– Часть 3. Газетная офсетная печать без сушильных устройств
– Часть 4. Процесс глубокой печати
– Часть 5. Трафаретная печать
– Часть 6. Флексографская печать
– Часть 7. Процессы получения пробных оттисков непосредственно с цифровых данных
– Часть 8. Процессы оценки оттисков, полученных непосредственно с цифровых данных
iv © ISO 2013 – Все права сохраняются

Введение
ISO 12647-1 содержит основную информацию об определениях, общих принципах, порядке
представления материала, который приведѐн в ISO12647-2 – ISO12647-7; кроме того, даны
определения исходных данных, сведения о условиях измерений и стилистике изложения отчетов.
Настоящая часть ISO 12647 рассматривает вопросы цифровой цветопробы и устанавливает
требования к пробной печати, наиболее важной части печатного и издательского рынка.
Настоящая часть ISO 12647, в основном, описывает значения или их наборы, а также допуски
первичных параметров, представленных в ISO 12647-1, в частности для цифровой цветопробы.
Основные параметры, определяющие условия печати, включают в себя соответствующие параметры
растрирования, цвета плашек, цвет запечатываемого материала, промежуточные значения между
вышеуказанными крайними значениями, а также кривые усиления тона. Соблюдение данных значений
гарантирует, что нейтрально серый цвет, полученный при изготовлении цифровых файлов и
растровом цветоделении с учѐтом условий проведения конкретного печатного процесса, станет
отправной точкой в пробных и печатных процессах. Сохраняющиеся отклонения от серого за счет
треппинга могут вызвать изменения в цвете в пределах допусков. Настоящая часть ISO 12647 в
дальнейшем определяет тестовые методы измерения свойств пробных оттисков и материалов,
использованных при их изготовлении, что при соблюдении стабильных и надежных условий
позволяет подвергнуть их сертификационной процедуре.
Современные полиграфические технологии позволяют интенсивно использовать пробные процессы
для прогнозирования требуемой подготовки цифровых файлов за счѐт разнообразных операций,
характеризующихся высоким разрешением и высоким качеством, без применения печатных машин.
Каждое прогнозирование результатов печатного процесса основывается на использовании
характеристических данных, определенных для условий проведения конкретного печатного процесса.
Как правило, конкретные условия печати определяются по профилям Международного консорциума по
цвету (ICC) или соответствующим набором характеристических данных, в которых исходные данные
увязаны с колориметрически определѐнным цветом на оттиске. Такие данные могут быть получены из
условий печати, соответствующих серии стандартов ISO 12647, а также от промышленных торговых
групп или частных фирм.
Цель цветопробы - обеспечить визуальные характеристики конечной печатной продукции насколько
возможно близко к оригиналу. Для этого требуется обеспечить визуальное соответствие пробного
оттиска с конкретными условиями печати и задать ряд параметров, которые не всегда идентичны
параметрам, приведенным в стандартах, начиная с ISO 12647-1, или других частей ISO 12647. Это
связано с различием цветового спектра красящих веществ и такими свойствами, как глянец,
светорассеивание (внутри запечатываемого материала или в красочном слое), а также
светопроницаемостью; в таких случаях установлено, что спектроколориметрия имеет преимущество
над денситометрией.
Другой проблемой является соответствие цифровой пробы на непрозрачной подложке оттиску
двусторонней печати на более светопроницаемом запечатываемом материале малой массы,
применяемому в рулонной офсетной печати с сушильным устройством и в печати издательской
продукции способом глубокой печати. Если пробный оттиск был получен с использованием цветовых
профилей, основанных на измерениях на белой подложке, будет неизбежно наблюдаться визуальная
и измеряемая разница в характеристиках пробного оттиска, с одной стороны, и тиражного оттиска,
измеренного на черной подложке, с другой стороны. Черную подложку необходимо использовать для
двухсторонней тиражной продукции на непрозрачном материале, как определено в соответствующих
частях ISO 12 647. Возможные обстоятельства таких расхождений необходимо заранее учитывать во
всех, имеющих отношение к этому, частях.
Исторически не было согласованности в направлении обеспечения удовлетворительной связи между
характеристическими данными, критериями и ограничениями для пробной и тиражной печати. Это

привело к значительным расхождениям и несогласованности в оценке систем пробной печати для
различных применений в промышленности, сходных по стоимости и времени. Международный
стандарт, следовательно, представляет собой руководство в этой области, обеспечивая пользователя
спецификациями и соответствующими тестовыми процедурами.
Приложение А содержит требования к пробным оттискам, полученным с цифровых данных,
изложенным в основной части настоящего стандарта ISO 12647; эти требования оцениваются с точки
зрения их актуальности в двух типичных ситуациях:
– когда требования к цветопробному оттиску, изготовленному с учетом конкретных условий печати,
должны быть указаны в контракте между печатником и поставщиком цифровых данных
(“Сертифицированная Цветопробная Система”);
– когда требования поставщика цветопробной системы, включающей в себя аппаратное и
программное обеспечение, должны реализовать стабильный процесс получения оттисков для
конкретных условий печати (“Сертифицированная Цветопробная Система”)

vi © ISO 2013 – Все права сохраняются

МЕЖДУНАРОДНЫЙ СТАНДАРТ ISO 12647-7:2013(R)

Технология полиграфии. Контроль процесса изготовления
цифровых файлов, растровых цветоделений, пробных и
тиражных оттисков.
Часть 7.
Процессы получения пробных оттисков непосредственно с
цифровых данных
1 Область применения
Настоящая часть ISO 12647 определяет требования к системам, которые используются для получения
пробных оттисков на вещественных носителях с целью моделирования условий печати, заданных с
помощью набора характеристических данных. Рекомендации даются с учѐтом использования тестовых
методов, соответствующих этим требованиям.
Информация, представленная в настоящей части ISO 12647, не зависит от метода получения
цифрового пробного оттиска.
2 Нормативные ссылки
Следующие ссылочные нормативные документы, частично или полностью, являются обязательными
при применении данного документа. Для жестких ссылок применяется только цитированное издание
документа. Для плавающих ссылок необходимо использовать самое последнее издание нормативного
ссылочного документа (включая любые изменения).
ISO 3664, Технология полиграфии и фотографии. Условия просмотра
ISO 8254-1, Бумага и картон. Измерение зеркального глянца. Часть 1. Измерение под углом 75
градусов в сходящемся пучке по методу ТАРРI
ISO 12040, Технология полиграфии. Оттиски и печатные краски. Оценка светостойкости с
использованием излучения ксеноновой лампы дугового разряда с фильтром
ISO 12639, Технология полиграфии. Обмен цифровыми данными на допечатной стадии. Теговый
формат файла изображения для технологии обработки изображений (TIFF/IT)
ISO 12640-1, Технология полиграфии. Обмен цифровыми данными на допечатной стадии. Часть 1.
Данные СMYK стандартных цветных изображений (CMYK/SCID)
ISO 12642-2, Технология полиграфии. Входные данные для представления характеристик
четырехкрасочного печатного процесса. Часть 2. Расширенный набор данных
ISO 12647-1:2004, Технология полиграфия. Контроль процесса изготовления цифровых файлов,
растровых цветоделений, пробных и тиражных оттисков. Часть 1. Параметры и методы
измерения
ISO 13655, Технология полиграфии. Спектральные измерения и колориметрические расчеты для
полиграфических репродукций
3 Термины и определения
В данном документе используются термины и определения, приведѐнные в ISO 12647-1,а также
следующие:
3.1
циф
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.