Aerospace series - Electrical contacts used in elements of connection - Part 045: Contacts, electrical, female, type A, double crimping, class T - Product standard

This standard specifies the required characteristics, tests and tooling applicable to female electrical contacts 045, type A, double crimping, class T, used in elements of connection according to EN 3155-002. It shall be used together with EN 3155-001. The associated male contact is defined in EN 3155-044. Double crimping contact has a barrel which is design to crimp conductor and jacket of cable in two locations, one on the conductor and the other on the jacket. This way protect the conductor from mechanical strengths.

Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen - Teil 045: Elektrischer Buchsenkontakt, Typ A, Doppelcrimpung, Klasse T - Produktnorm

Diese Norm legt die erforderlichen Eigenschaften, Prüfungen und Werkzeuge für elektrische Buchsenkontakte 045, Typ A, Doppelcrimpung, Klasse T, zur Verwendung in elektrischen Verbindungselementen nach EN 3155 002 fest.
Die vorliegende Norm ist in Verbindung mit EN 3155 001 anzuwenden.
Der zugehörige Stiftkontakt ist in EN 3155-044 festgelegt.
Der Kontakt mit Doppelcrimpung besitzt eine Hülse, die so konstruiert ist, dass sie den Leiter und den Lei¬tungsmantel an zwei Stellen crimpt, sowohl am Leiter als auch am Mantel. Auf diese Weise wird der Leiter von mechanischer Beanspruchung  geschützt.

Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 045 : Contacts électriques, femelles, type A, double sertissage, classe T - Norme de produit

Aeronavtika - Električni kontakti za uporabo v veznih elementih - 045. del: Kontakti, električni, ženski, tip A, dvojno zaključeni, razred T - Standard za proizvod

General Information

Status
Withdrawn
Publication Date
15-Dec-2008
Withdrawal Date
18-Dec-2019
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
19-Dec-2019
Due Date
11-Jan-2020
Completion Date
19-Dec-2019

Relations

Buy Standard

Standard
EN 3155-045:2009
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 3155-045:2009
01-februar-2009
$HURQDYWLND(OHNWULþQLNRQWDNWL]DXSRUDERYYH]QLKHOHPHQWLKGHO
.RQWDNWLHOHNWULþQLåHQVNLWLS$GYRMQR]DNOMXþHQLUD]UHG76WDQGDUG]D
SURL]YRG
Aerospace series - Electrical contacts used in elements of connection - Part 045:
Contacts, electrical, female, type A, double crimping, class T - Product standard
Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen -
Teil 045: Elektrischer Buchsenkontakt, Typ A, Doppelcrimpung, Klasse T - Produktnorm
Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie
045 : Contacts électriques, femelles, type A, double sertissage, classe T - Norme de
produit
Ta slovenski standard je istoveten z: EN 3155-045:2006
ICS:
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
SIST EN 3155-045:2009 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 3155-045:2009

---------------------- Page: 2 ----------------------

SIST EN 3155-045:2009
EUROPEAN STANDARD
EN 3155-045
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2006
ICS 49.060

English Version
Aerospace series - Electrical contacts used in elements of
connection - Part 045: Contacts, electrical, female, type A,
double crimping, class T - Product standard
Série aérospatiale - Contacts électriques utilisés dans les Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung
organes de connexion - Partie 045 : Contacts électriques, in Verbindungselementen - Teil 045: Elektrischer
femelles, type A, double sertissage, classe T - Norme de Buchsenkontakt, Typ A, doppelt gecrimpt, Klasse T -
produit Produktnorm
This European Standard was approved by CEN on 26 September 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3155-045:2006: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 3155-045:2009
EN 3155-045:2006 (E)
Contents Page
Foreword .3
1 Scope.4
2 Normative references.4
3 Terms and definitions.4

4 Required characteristics.5
4.1 Dimensions, mass.5
4.2 Material, protective plating.6
4.3 Permissible cables.6
4.4 Cable stripping.6
4.5 Tooling.6
4.6 Tests.7
4.7 Gauges.8
5 Designation.8
6 Marking.8
7 Technical specification.8

2

---------------------- Page: 4 ----------------------

SIST EN 3155-045:2009
EN 3155-045:2006 (E)
Foreword
This European Standard (EN 3155-045:2006) has been prepared by the European Association of Aerospace
Manufacturers - Standardization (AECMA-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
AECMA, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by November 2006, and conflicting national standards shall be withdrawn
at the latest by November 2006.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.