iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60873:1998

(Main)

Methods of evaluating the performance of electrical and pneumatic analogue chart recorders for use in industrial-process control systems

Methods of evaluating the performance of electrical and pneumatic analogue chart recorders for use in industrial-process control systems

Provides methods for evaluating the performance of all electrical and pneumatic analogue chart recorders operating from a standardized signal which may be used in process control. Continuous and dotted line traces, multiple-pen and multiple-channel instruments are covered.

Methoden der Beurteilung des Betriebsverhaltens von analogen elektrischen und pneumatischen Streifenschreibern in Systemen der industriellen Prozeßtechnik

Méthodes d'évaluation des performances des enregistreurs analogiques électriques et pneumatiques sur papier diagramme, utilisés dans les systèmes de conduite des processus industriels

Décrit des méthodes destinées à évaluer les performances de tous les enregistreurs analogiques électriques et pneumatiques sur papier diagramme, fonctionnant à partir d'un signal normalisé qui peut être utilisé dans les systèmes de conduite des processus. Couvre les instruments à tracés continus et à tracés interrompus, les instruments à plusieurs plumes et à plusieurs canaux.

Methods of evaluating the performance of electrical and pneumatic analogue chart recorders for use in industrial-process control systems (IEC 60873:1986, modified)

General Information

Status
Withdrawn
Publication Date
31-Oct-1998
Withdrawal Date
17-May-2009
ICS
17.220.20 - Measurement of electrical and magnetic quantities
Technical Committee
MKP - Industrial-process measurement and control
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
21-Apr-2009
Due Date
14-May-2009
Completion Date
18-May-2009
Ref Project
EN 60873:1993 - Methods of evaluating the performance of electrical and pneumatic analogue chart recorders for use in industrial-process control systems

Relations

Replaced By
SIST EN 60873-1:2004 - Electrical and pneumatic analogue chart recorders for use in industrial-process control systems -- Part 1: Methods for performance evaluation
Effective Date
28-Jan-2023
Replaced By
SIST EN 60873-1:2004 - Electrical and pneumatic analogue chart recorders for use in industrial-process control systems -- Part 1: Methods for performance evaluation
Effective Date
06-May-2014
Replaced By
SIST EN 60873-1:2004 - Electrical and pneumatic analogue chart recorders for use in industrial-process control systems -- Part 1: Methods for performance evaluation
Effective Date
07-Jun-2022

Buy Standard

EN 60873:1998EN 60873:1998
PreviousNext
Standard
EN 60873:1998
English language
39 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SIST EN 60873:1998

---------------------- Page: 1 ----------------------

SIST EN 60873:1998

---------------------- Page: 2 ----------------------

SIST EN 60873:1998

---------------------- Page: 3 ----------------------

SIST EN 60873:1998

---------------------- Page: 4 ----------------------

SIST EN 60873:1998

---------------------- Page: 5 ----------------------

SIST EN 60873:1998

---------------------- Page: 6 ----------------------

SIST EN 60873:1998

---------------------- Page: 7 ----------------------

SIST EN 60873:1998

---------------------- Page: 8 ----------------------

SIST EN 60873:1998

---------------------- Page: 9 ----------------------

SIST EN 60873:1998

---------------------- Page: 10 ----------------------

SIST EN 60873:1998

---------------------- Page: 11 ----------------------

SIST EN 60873:1998

---------------------- Page: 12 ----------------------

SIST EN 60873:1998

---------------------- Page: 13 ----------------------

SIST EN 60873:1998

---------------------- Page: 14 ----------------------

SIST EN 60873:1998

---------------------- Page: 15 ----------------------

SIST EN 60873:1998

---------------------- Page: 16 ----------------------

SIST EN 60873:1998

---------------------- Page: 17 ----------------------

SIST EN 60873:1998

---------------------- Page: 18 ----------------------

SIST EN 60873:1998

---------------------- Page: 19 ----------------------

SIST EN 60873:1998

---------------------- Page: 20 ----------------------

SIST EN 60873:1998

---------------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 60873-2:2004(Main)
Electrical and pneumatic analogue chart recorders for use in industrial process control systems -- Part 2: Guidance for inspection and routine testing
EN 60873-2:2004

applies to electrical and pneumatic analogue chart recorders (for use in industrial-process control systems), operating from a standardized signal which may be used in process control. It is intended that continuous and dotted line traces, and multiple pen and multiple-channel instruments should be covered. Provides technical guidance for inspection and routine testing of electrical and pneumatic analogue chart recorders, for instance, as acceptance tests or after repair

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62057-1:2023(Main)
Electrical energy meters - Test equipment, techniques and procedures - Part 1: Stationary meter test units (MTUs) (IEC 62057-1:2023)
EN IEC 62057-1:2023

IEC 62057-1:2023 applies to stationary meter test units (MTUs) permanently installed in laboratories, used for testing and calibration of electricity meters, in particular for their type test, acceptance test and verification test. It covers the requirements for automatic MTUs for indoor laboratory application and applies to newly manufactured MTUs to test electricity meters on 50 Hz or 60 Hz networks with an AC voltage up to 600 V (phase to neutral).
If meters are intended for system voltages not specified in this document, special requirements are agreed between the manufacturer and the purchaser.
This document also defines the kind of tests to perform as type tests / routine tests / acceptance tests and commissioning tests for MTUs.
It does not apply to:
• portable reference meters and portable sources;
• electricity meters;
• data interfaces to the meter and test procedures of data interface;
• transformer operated MTUs;
• personal computers supplied together with the MTU.

  • Standard
    80 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60404-12:2023(Main)
Magnetic materials - Part 12: Methods of test for the assessment of the thermal endurance of surface insulation coatings on electrical steel strip and sheet (IEC 60404-12:2023)
EN IEC 60404-12:2023

This part of IEC 60404 is applicable to surface insulation coatings on electrical steel strip and
sheet classified in IEC 60404-1-1.
This document defines the general principles and technical details of the tests for the
assessment of the thermal endurance of surface insulation coatings on electrical steel strip and
sheet.
The assessment is made by evaluating the change of a specified property of the surface
insulation coating due to a heat treatment at a specified temperature up to 850 °C for a specified
duration time up to 2 500 h. The specified property is measured at an ambient temperature of
(23 ± 5) °C both without heat treatment and after heat treatment.
This document is applicable to the following properties of surface insulation coatings:
– adhesion;
– surface insulation resistance;
– stacking factor.
This document is not applicable to other properties of surface insulation coatings, e.g. welding
properties, or to other effects, e.g. discoloration and off-gassing, which can be caused by
exposure to elevated temperatures.
NOTE Some of the tests take a very long time to perform and therefore they are often not appropriate for acceptance
tests of material supplied on a specific order.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62052-41:2023(Main)
Electricity metering equipment - General requirements, tests and test conditions - Part 41: Energy registration methods and requirements for multi-energy and multi-rate meters (IEC 62052-41:2022)
EN IEC 62052-41:2022

IEC 62052-41:2022 applies only to newly manufactured multi-energy and/or multi-rate static meters and it applies to their type tests only.
This document applies to electricity metering equipment designed to:
• measure and control electrical energy on networks with voltage up to 1 000 V AC, or 1 500 V DC;
• have all functional elements, including add-on modules, enclosed in, or forming a single meter case with exception of indicating displays;
• operate with integrated displays;
• operate with detached indicating displays, or without an indicating display;
• be installed in a specified matching socket or rack;
• optionally, provide additional functions other than those for measurement of electrical energy.
Meters designed for operation with Low Power Instrument Transformers (LPITs as defined in the IEC 61869 series) may be tested for compliance with this document and the relevant IEC 62053 series documents only if such meters and their LPITs are tested together as directly connected meters.
This document does not apply to:
• meters for which the voltage line-to-neutral derived from nominal voltages exceeds 1 000 V AC, or 1 500 V DC;
• meters intended for connection with low power instrument transformers (LPITs as defined in the IEC 61869 series of standards) when tested without such transformers;
• metering systems comprising multiple devices (except for LPITs) physically remote from one another;
• portable meters;
• meters used in rolling stock, vehicles, ships and airplanes;
• laboratory and meter test equipment;
• reference standard meters;
• data interfaces to the register of the meter;
• matching sockets or racks used for installation of electricity metering equipment.
This document does not cover measures for the detection and prevention of fraudulent attempts to compromise a meter’s performance (tampering).

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61869-99:2023(Main)
Instrument transformers - Part 99: Glossary (IEC 61869-99:2022)
EN IEC 61869-99:2022

IEC 61869-99:2022 contains the glossary of specific terminology and definitions used in the field of instrument transformers within the various parts of the series. Unless it is otherwise specified, in this document all periodic electrical quantities are understood to be RMS values.

  • Standard
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60404-3:2023(Main)
Magnetic materials - Part 3: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester (IEC 60404-3:2022)
EN IEC 60404-3:2022

IEC 60404-3:2022 is available as IEC 60404-3:2022 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60404-3:2022 is applicable to grain-oriented and non-oriented electrical steel strip and sheet for measurement of AC magnetic properties at power frequencies. The object of this document is to define the general principles and the technical details of the measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester (SST). This edition includes the following significant technical changes with respect to the previous edition:
- Annex A was revised. The method of determining the yokes’ lamination resistance was added to Annex A;
- Annex B of the consolidated version of 2010 referred to calibration of the SST using the Epstein method. It was cancelled;
- Annex B (new), Annex C and Annex D were revised, they are for information only;
- Annex C was modified taking account of the new situation regarding P and R grades;
- Annex D was amended by addition of Clause D.4 on the numerical air flux compensation.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62764-1:2022(Main)
Measurement procedures of magnetic field levels generated by electronic and electrical equipment in the automotive environment with respect to human exposure - Part 1: Low frequency magnetic fields
EN IEC 62764-1:2022

This part of IEC 62764 applies to the assessment of human exposure to low-frequency magnetic
fields generated by automotive vehicles. For plug-in vehicles, this includes the electric vehicle
supply equipment (EVSE) and associated cables provided by the car manufacturer. This
excludes the charging station.
This document specifies the measurement procedure for the evaluation of magnetic field
exposures generated by electronic and electrical equipment (excluding intentionally
transmitting radio frequency antennas) in selected automotive environments, for passenger
cars and commercial vehicles of categories M1 and N1 as defined in
ECE/TRANS/WP.29/78/Rev.3 [1]1, with respect to human exposure. It provides standardized
operating conditions and defines recommended measurements to assess compliance with the
applicable exposure requirements.
This document covers the frequency range 1 Hz to 100 kHz and is applicable to any type of
engine and/or internal energy source.
This document does not include procedures for assessment of human exposure to
electromagnetic fields generated by wireless power transfer (WPT) equipment operating in
automotive environments. Exposure assessment procedures for WPT equipment are covered
by IEC PAS 63184 [2]. Magnetic field transients shorter than 200 ms occurring when electrical
functions are activated are not considered in this document.
Abnormal operation of the vehicle or its equipment is not taken into consideration.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61557-12:2022/AC:2022(Corrigendum)
Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 12: Power metering and monitoring devices (PMD) (IEC 61557-12:2018/COR1:2022)
EN IEC 61557-12:2022/AC:2022-09

IEC Corrected Version

  • Corrigendum
    4 pages
    French language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61557-12:2022/A1:2022/AC:2022(Corrigendum)
Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 12: Power metering and monitoring devices (PMD) (IEC 61557-12:2018/A1:2021/COR1:2022)
EN IEC 61557-12:2022/A1:2022/AC:2022-09

IEC Corrected Version

  • Corrigendum
    4 pages
    French language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62055-42:2022(Main)
Electricity metering - Payment systems - Part 42: Transaction Reference Numbers (TRN)
EN IEC 62055-42:2022

This document specifies a token generation mechanism and token structure for smart
prepayment functionality in markets where IEC 62055-41 compliant systems are not used, and
where a different security mechanism is required by project-specific or national requirements.
This document specifies token structure, authentication and an anti-replay mechanism, token
operating model, and protocol.
This document is informed by the STS Association key management services, and by the key
management mechanisms used within the DLMS/COSEM security model within IEC 62056‑6‑2.
Reference is made to the international STS token standards (IEC 62055-41, IEC 62055-51 and
IEC 62055-52) for payment metering systems, and interworking has been considered where
appropriate in terms of token carrier ranges in the decimal domain. IEC 62055-41 tokens and
those described in this document are not interoperable, however their domains are designed to
be mutually exclusive to ensure the two kinds of tokens do not interfere with each other.
Metering application processing and functionality, HAN interface commands and attributes,
WAN interface commands and attributes are outside the scope of this document; however,
reference is made to other standards in this regard.
The mechanism for auditing and retrieving data from the meter relating to tariffication, meter
readings, profile data and other legal metrology information is outside the scope of this
document; however, this is defined as part of any overall metering solution. Such interfaces for
retrieving data from a meter may be defined using suitable protocols such as DLMS/COSEM as
defined in the IEC 62056 series.

  • Standard
    84 pages
    English language
    sale 10% off
    e-Library read for
    1 day