iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

oSIST prEN ISO 16757-4:2024

(Main)

Data structures for electronic product catalogues for building services - Part 4: Dictionary structures for product catalogue (ISO/DIS 16757-4:2024)

Data structures for electronic product catalogues for building services - Part 4: Dictionary structures for product catalogue (ISO/DIS 16757-4:2024)

The focus of ISO 16757 is the support of manufacturers to provide their product data in electronic product catalogues. The standard - ISO 16757 Part 4: Dictionaries for product catalogues – describes which data structures are required in a dictionary to support the exchange of product data from manufacturers to designers of building services systems.
Basis for this specification are the standards ISO 12006-3 and ISO 23386.
In the scope of this standard are the following elements:
-   The definition of roles of ISO 12006-3 subjects that are needed to describe the concepts used in current product catalogue dictionaries. These roles include the following:
o   Product classes to represent product groups with similar property sets
o   Blocks that represent reusable and multiply used set of properties
o   System classes that represent the systems into which a product may be installed and provide the system properties which determine the values of dependent product properties
o   Port classes that allow the product independent description of different kinds of ports which can be used for the definition of product classes or blocks
o   Catalogue classes that describe the meta data of a catalogue
o   Tagging classes that allow the tagging of properties to distinguish property roles in the product description
-   A requirement model capturing the necessary structures to describe these roles
-   A mapping to the dictionary model of ISO 12006-3.

Datenstrukturen für elektronische Produktkataloge der Technischen Gebäudeausrüstung - Teil 4: Datenwörterbücher für Produktkataloge (ISO/DIS 16757-4:2024)

Structures de données pour catalogues électroniques de produits pour les services du bâtiment - Partie 4: Titre manque (ISO/DIS 16757-4:2024)

Podatkovne strukture digitalnih knjižnic gradnikov stavbnih sistemov - 4. del: Podatkovni slovarji za kataloge izdelkov (ISO/DIS 16757-4:2024)

General Information

Status
Not Published
Public Enquiry End Date
09-Jun-2024
ICS
35.240.67 - IT applications in building and construction industry
91.010.01 - Construction industry in general
Technical Committee
BIM - Building Information Modelling (BIM)
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
18-Apr-2024
Due Date
05-Sep-2024
Ref Project
prEN ISO 16757-4 - Data structures for electronic product catalogues for building services - Part 4: Dictionary structures for product catalogue (ISO/DIS 16757-4:2024)

Buy Standard

prEN ISO 16757-4:2024 - BARVEprEN ISO 16757-4:2024 - BARVE
PreviousNext
Draft
prEN ISO 16757-4:2024 - BARVE
English language
25 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 16757-4:2024
01-junij-2024
Podatkovne strukture digitalnih knjižnic gradnikov stavbnih sistemov - 4. del:
Podatkovni slovarji za kataloge izdelkov (ISO/DIS 16757-4:2024)
Data structures for electronic product catalogues for building services - Part 4: Dictionary
structures for product catalogue (ISO/DIS 16757-4:2024)
Datenstrukturen für elektronische Produktkataloge der Technischen Gebäudeausrüstung
- Teil 4: Datenwörterbücher für Produktkataloge (ISO/DIS 16757-4:2024)
Structures de données pour catalogues électroniques de produits pour les services du
bâtiment - Partie 4: Titre manque (ISO/DIS 16757-4:2024)
Ta slovenski standard je istoveten z: prEN ISO 16757-4
ICS:
35.240.67 Uporabniške rešitve IT v IT applications in building
gradbeništvu and construction industry
91.010.01 Gradbeništvo na splošno Construction industry in
general
oSIST prEN ISO 16757-4:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 16757-4:2024

---------------------- Page: 2 ----------------------
oSIST prEN ISO 16757-4:2024
DRAFT
International
Standard
ISO/DIS 16757-4
ISO/TC 59/SC 13
Data structures for electronic
Secretariat: SN
product catalogues for building
Voting begins on:
services —
2024-03-20
Part 4:
Voting terminates on:
2024-06-12
Dictionary structures for product
catalogue
ICS: 91.010.01
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 16757-4:2024(en)
© ISO 2024

---------------------- Page: 3 ----------------------
oSIST prEN ISO 16757-4:2024
DRAFT
ISO/DIS 16757-4:2024(en)
International
Standard
ISO/DIS 16757-4
ISO/TC 59/SC 13
Data structures for electronic
Secretariat: SN
product catalogues for building
Voting begins on:
services —
Part 4:
Voting terminates on:
Dictionary structures for product
catalogue
ICS: 91.010.01
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 16757-4:2024(en)
© ISO 2024
© ISO 2024 – All rights reserved
ii

---------------------- Page: 4 ----------------------
oSIST prEN ISO 16757-4:2024
ISO/DIS 16757-4:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 17549-2:2023(Main)
Building information modelling - Information structure based on EN ISO 16739 1 to exchange data templates and data sheets for construction objects - Part 2: Configurable construction objects and requirements
EN 17549-2:2023

The digital transformation of the construction industry includes also the digital transformation of the supply chaine of construction products. With EN ISO 16739-1 exists an open language to design, transfer and maintain construction models. The construction models (e.g. of a building) contain a digital twin of real-life products. The data of these products should be transported in a digital format on the way from the factory to the building owner.
This product data should be expressed also in an easy and open way. The creators of product data files should be able to do this manually or automatically, as they like it. The users of product data should be able to use it to:
•   Express their requirements related to products
•   Describe configurable products
•   Import product data easily in the BIM models at any stage of the project (design, construction, operation)
•   Export product data easily from the BIM models at any stage of the project (design, construction, operation)
These scenarios fit in the business models of manufacturers, planners, construction companies and facility managers.
The working group 4 of CEN-TC442 has published proposals for creating new work items in the sector of CEN regarding the storage and the transport of product data in the sector of building information modelling (BIM):
EN ISO 16739-1:2018: Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries- Part 1: Data schema
EN ISO 12006-3: Building construction – Organization of information about construction works – Part 3: Framework for object-oriented information
prEN ISO 23386: Building information modelling and other digital processes used in Construction – Methodology to describe, author and maintain properties in interconnected dictionaries
prEN ISO 23387: Data templates for construction works entities, Part 1:  Objects, collections, and relationships defining the general structure of data templates
This standard defines a format to negotiate product data templates, express requirements and describe configurable products and therefore fills the missing link between the product data sources (e.g. catalogs) from the manufacturers and the BIM models of the designers, builders, and owners.

  • Standard
    212 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 29481-3:2023(Main)
Building information models - Information delivery manual - Part 3: Data schema (ISO 29481-3:2022)
EN ISO 29481-3:2022

This part of ISO 29481 Information Delivery Manual (IDM) specifies:
• a data schema for exchanging the data required in specific data exchange scenarios during the building lifecycle in the
extensible markup language (XML) schema format.
• a classification system for IDM specifications.
This part of ISO 29481 is intended to facilitate interoperability and reusability of IDM specifications. It promotes digital collaboration
between actors in the construction process and provides a basis for accurate, reliable, repeatable and high-quality information
exchange.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 19650-4:2023(Main)
Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) - Information management using building information modelling - Part 4: Information exchange (ISO 19650-4:2022)
EN ISO 19650-4:2022

ISO 19650 part 4 provides detailed process and criteria for the decision points in the process of executing an information exchange within information management as defined by ISO 19650. It promotes a sustainable approach to information exchange where the immediate delivery of information does not preclude its future use.    
It is applicable to any information exchange within project stages (ISO 19650 part 2) and within in-use events (ISO 19650 part 3).  All development and information exchanges should be executed under the appropriate security controls (ISO 19650 part 5).
It supports the satisfaction of a specific EIR/AIR related to an individual information exchange of any type of information by enumerating criteria relating to completeness, compliance to formal exchange schemas, the continuity of concepts between exchanges and the elimination of spatial and specification conflicts

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17632-1:2023(Main)
Building Information Modelling (BIM) - Semantic Modelling and Linking (SML) - Part 1: Generic modelling patterns
EN 17632-1:2022

This document discusses an integrated and unified approach for data aspects, specifically for assets in the built environment, using EIF terminology.
The following data architecture (Figure 1) applies within each category.
Figure 1 - Data architecture with typology (grey areas indicating the scope of this document)
...
This document specifies:
-   a generic Top Level "M1: Data model" as common form;
-   a conceptual "L1: Data language" as common meta-model with four ‘linked data’-based concrete language bindings (SKOS, RDFS, OWL and SHACL), including:
-   a choice of RDF-based formats (to be used for all modelling and language levels);
-   a set of data modelling patterns (for identification, naming, handling of enumeration types, quantity modelling, asset decomposition, grouping, etc.).
-   a linking approach for interlinking data sets, interlinking data models and linking data sets and data models which are relevant within the built environment from many perspectives such as:
-   Building information modelling (BIM);
-   Geo-spatial information systems (GIS);
-   Systems engineering (SE)  );
-   Monitoring & control (M&C);
-   Electronic document management (EDM).
This document does not specify a knowledge model since this is already available in ISO 12006-3.
This document does not specify a meta-‘data language’ since this is already provided by the concrete RDF language bindings (being RDFS).
The scope of this document in general excludes the following:
-   Business process modelling;
-   Software implementation aspects;
-   Data packaging and transportation/transaction aspects (handled by ISO TC59/SC13 Information container for document delivery (ICDD) respectively various information delivery manual (IDM) / information exchange requirements (EIR)-related initiatives);
-   Domain-specific (here: built environment-specific) content modelling in the form of concepts, attributes and relations at end-user level (the actual ontologies themselves) beyond a generic upper ontology and modelling patterns.

  • Standard
    97 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 12006-3:2022(Main)
Building construction - Organization of information about construction works - Part 3: Framework for object-oriented information (ISO 12006-3:2022)
EN ISO 12006-3:2022

This document specifies a language-independent information model which can be used for the
development of dictionaries used to store or provide information about construction works. The model
is extended by instantiating content, such as further objects and their relationships, allowing the
content to serve as an ontology, taxonomy, meronomy, lexicon and thesaurus.
NOTE 1 Lexicons are resources for comprising lexical entries for a given language
NOTE 2 Meronomies are type of hierarchies which deals with part-whole relationships
NOTE 3 Ontologies are formal, explicit specification of a shared conceptualizationIt enables classification
systems, information models, object models, data templates and process models to be cross-referenced from
within a common framework.
This document provides the description of an API allowing the interconnection of data dictionaries as
described in ISO 23386.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 17741:2022(Main)
Guidance for understanding and utilize EN/ISO 29481-1 Building information models - Information delivery manual - Part 1: Methodology and format
CEN/TR 17741:2021

This document provides a guidance on how to develop an Information Delivery Manual (IDM) in compliance with EN ISO 29481-1 hereafter referred to as the "IDM standard". This document explains the core components and development process of the IDM methodology in non-technical terms. This guidance aims to help users and software vendors understand and utilise the IDM standard in defining information requirements and deliverables.
The technical implementation of IDM in a data model, Model View Definition 1) (MVD), is excluded from this guideline’s scope. IDM standard introduces the MVD concept but does not specify it in detail.
This guidance also utilises some transaction framework concepts introduced in EN ISO 29481-2. The technical XML- and XSD-schema definitions supporting the software solutions are excluded from this guidance.
1) An MVD defines a data model or a subset of an existing data model that is necessary to support one or many specific data exchange requirements. MVDs are used in software development and should have a machine-readable representation. An MVD that is dedicated to a single IDM can be used to filter information in software tools to a specific exchange requirement. [SOURCE: EN ISO 29481-1:2017, 5.6.4].
1.1   Background
This guideline primary reference is the IDM standard part 1 (EN ISO 29481-1:2017) (hereafter referred to as IDM standard). This guideline helps in understanding and using the IDM standard to describe information delivery. The guidance also uses some concepts described in part 2 of the IDM standard series (EN ISO 29481-2:2016). Considerable efforts have been made to align this guidance with the terminology and concepts introduced in EN ISO 19650-1 and EN ISO 19650-2.
Information Delivery Manual specification (hereafter referred to as the IDM specification) provides help in getting the full benefit from building information modelling (BIM). When the required information is available in the BIM to support a construction process or use case, and the quality of information is satisfactory, the process itself is much improved. The IDM standard provides a method to create the specification.
A complete IDM specification should support two perspectives: user requirements and technical solutions. User requirements describe the needed information delivery and the overall process in which information exchange occurs. The technical solution defines an exchange requirement model using a harmonised data schema.
EN ISO 29481-1 provides a methodology and a harmonised format to specify information requirements. It offers a framework and method to determine the needed information delivery with process maps and exchange requirements.
EN ISO 29481-2 specifies an interaction framework and format to describe "coordination acts" between actors or parties within an appointment. It facilitates interoperability between software applications used in the construction process to promote digital collaboration between actors in the building construction process. Also, it provides a basis for accurate, reliable, repeatable, and high-quality information exchange.
1.2   Users of this guidance document
This guidance document is intended for clients, architects, engineers, contractors, surveyors, authorities, and other parties who need to specify or implement information delivery. Originally, the IDM standard was focused on defining BIM deliverables, but the possible application of the standard is much broader. It can be used to specify any requirement for information delivery.
Although software developers and technology adapters are not the primary audiences of this guidance document, it may help them better understand existing IDMs and develop their own IDMs.
1.3   Relation to EN ISO 19650
The IDM standard is a process-oriented methodology used to describe the information exchange requirements for a particular purpose which may complement the information-management approach outlined in the EN ISO 19650 series...

  • Technical report
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 17654:2021(Main)
Guideline for the implementation of BIM Execution Plans (BEP) and Exchange Information Requirements (EIR) on European level based on EN ISO 19650-1 and -2
CEN/TR 17654:2021

BIM Execution Plans (BEP) and Exchange Information requirements (EIR) are central complementary documents for the definition of information requirements and how to process them in collaborative BIM environments.
Where EIR defines the Exchange information requirements of an appointing party and BEP – the BIM execution Plan – is the plan how to fulfill these requirements by the appointed parties.
This work item will
•   examine and explain the demands for Exchange Information Requirements (EIR) and BIM execution Plans (BEP) based on EN/ISO 19650-1 and -2.
•   Provide guidance for the implementation of EIR and BEP
•   Provide templates for the creation of EIR and BEP

  • Technical report
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 21597-2:2021(Main)
Information container for linked document delivery - Exchange specification - Part 2: Link types (ISO 21597-2:2020)
EN ISO 21597-2:2020

This document provides the opportunity to add information about the contents of a container by further
specializing the generic types of links specified in ISO 21597-1. The defined link types have been chosen
to enhance the use of the container by allowing the addition of semantic relationships that are human
interpretable to provide greater clarity about those links.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17412-1:2021(Main)
Building Information Modelling - Level of Information Need - Part 1: Concepts and principles
EN 17412-1:2020

This document specifies concepts and principles to establish a methodology for specifying level of information need and information deliveries in a consistent way when using Building Information Modelling (BIM).
This document specifies the characteristics of different levels used for defining the detail and extent of information required to be exchanged and delivered throughout the life cycle of built assets. It gives guidelines for principles required to specify information needs.
The concepts and principles in this document can be applied for a general information exchange and whilst in progress, for a generally agreed way of information exchange between parties in a collaborative work process, as well as for a contractually specified information delivery.
The level of information need provides methods for describing information to be exchanged according to exchange information requirements. The exchange information requirements specify the wanted information exchange. The result of this process is an information delivery.
The concepts and principles contained in this document are applicable to all those involved in the asset life cycle. This includes, but is not limited to, the asset owner/operator, the project client, the asset manager, the design team, the construction supply chain, the equipment manufacturer, the system specialist, the regulator, and the end-user.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 19650-5:2020(Main)
Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) - Information management using building information modelling - Part 5: Security-minded approach to information management (ISO 19650-5:2020)
EN ISO 19650-5:2020

This proposed ISO standard will specify requirements for the security-minded management of projects utilizing digital technologies, associated control systems, for example building management systems, digital built environments and smart asset management. It outlines security threats to information during asset:.
• conception, strategy and briefing;
• procurement;
• design;
• construction;
• commissioning and handover;
• operation and maintenance;
• performance management;
• change of use/modification; and
• disposal/demolition.
It will explain the need for, and application of,trustworthiness and security controls throughout a built asset’s lifecycle (including the full project lifecycle) to deliver a holistic approach encompassing:
• safety;
• authenticity;
• availability (including reliability);
• confidentiality;
• integrity;
• possession;
• resilience; and
• utility.
The standard will address the steps required to create and cultivate an appropriate safety and security mindset and culture across many partners, including the need to monitor and audit compliance.
It will provide a foundation to support the evolution of future digital built environments, for example intelligent buildings, infrastructure and smart cities, but does not detail technical architectures for their implementation. While the processes contained within it may be applicable to other data management systems, this PAS does not specifically address issues relating to these systems.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day