SIST EN 3671:2009

Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) - Non heat treated - Forging stock - a or D ≤ 250 mm

This standard specifies the requirements relating to:
Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb)
Non heat treated
Forging stock
a or D £ 250 mm
for aerospace applications.

Luft- und Raumfahrt - Hochwarmfeste Legierung NI-PH3601 (NiCr22Mo9Nb) - Nicht wärmebehandelt - Schmiedevormaterial - a oder D ≤ 250 mm

Diese Norm legt die Anforderungen an
Hochwarmfeste Legierung NI PH3601 (NiCr22Mo9Nb)
Nicht wärmebehandelt
Schmiedevormaterial
a oder D  250 mm
für Anwendungen in der Luft- und Raumfahrt fest.

Série aérospatiale - Alliage résistant à chaud NI-PH3601 (NiCr22Mo9Nb) - Non traité - Produits destinés à la forge - a ou D ≤ 250 mm

Aeronavtika - Zlitina NI-PH3601 (NiCr22Mo9Nb), odporna proti vročini - Toplotno neobdelana - Material za kovanje - a ali D ≤ 250 mm

General Information

• Status: Published
• Publication Date: 07-Apr-2009
• ICS: 49.025.99 - Other materials
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 03-Apr-2009
• Due Date: 08-Jun-2009
• Completion Date: 08-Apr-2009
• Ref Project: EN 3671:2007 - Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) - Non heat treated - Forging stock - a or D ≤ 250 mm

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.49.025.99Drugi materialiOther materialsICS:Ta slovenski standard je istoveten z:EN 3671:2007SIST EN 3671:2009en,de01-maj-2009SIST EN 3671:2009SLOVENSKI
STANDARD



SIST EN 3671:2009



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3671
March 2007 ICS 49.025.99 English Version
Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) - Non heat treated - Forging stock - a or D ≤250 mm
Série aérospatiale - Alliage résistant à chaud NI-PH3601 (NiCr22Mo9Nb) - Non traité - Produits destinés à la forge - a ou D ≤ 250 mm
Luft- und Raumfahrt - Hochwarmfeste Legierung NI-PH3601 (NiCr22Mo9Nb) - Nicht wärmebehandelt - Schmiedevormaterial - a oder D ≤ 250 mm This European Standard was approved by CEN on 5 October 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3671:2007: ESIST EN 3671:2009



EN 3671:2007 (E) 2 Foreword This document (EN 3671:2007) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2007, and conflicting national standards shall be withdrawn at the latest by September 2007. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Po
...