Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO 2811-3:2011)

This part of ISO 2811 specifies a method for determining the density of paints, varnishes and related products using an oscillator. The method is suitable for all materials, including paste-like coatings. If a pressure-resistant type of apparatus is used, the method is also applicable to aerosols.

Beschichtungsstoffe - Bestimmung der Dichte - Teil 3: Schwingungsverfahren (ISO 2811-3:2011)

Dieser Teil von ISO 2811 legt ein Verfahren zum Bestimmen der Dichte von Beschichtungsstoffen und
ähnlichen Produkten mit einem Schwingungs-Dichtemesser fest.
Das Verfahren ist für alle Beschichtungsstoffe einschließlich pastenförmiger anwendbar. Wenn eine
druckfeste Ausführung des Gerätes verwendet wird, ist das Verfahren auch für Aerosole.

Peintures et vernis - Détermination de la masse volumique - Partie 3: Méthode par oscillation (ISO 2811-3:2011)

L'ISO 2811-3:2011 spécifie une méthode de détermination de la masse volumique des peintures, vernis et produits assimilés au moyen d'un oscillateur.
La méthode convient pour tous les produits, y compris les revêtements de consistance pâteuse. Si un type d'appareillage résistant à la pression est utilisé, la méthode est également applicable aux aérosols.

Barve in laki - Ugotavljanje gostote - 3. del: Oscilacijska metoda (ISO 2811-3:2011)

Ta del ISO 2811 določa metodo za ugotavljanje gostote barv, lakov in sorodnih proizvodov z uporabo oscilatorja. Metoda je primerna za vse materiale, vključno s pastoznimi prevlekami. Če se uporablja aparat, odporen proti tlaku, je metoda uporabna tudi za aerosole.

General Information

Status
Withdrawn
Publication Date
11-Oct-2011
Withdrawal Date
12-Dec-2023
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
04-Dec-2023
Due Date
27-Dec-2023
Completion Date
13-Dec-2023

Relations

Buy Standard

Standard
EN ISO 2811-3:2011
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Barve in laki - Ugotavljanje gostote - 3. del: Oscilacijska metoda (ISO 2811-3:2011)Beschichtungsstoffe - Bestimmung der Dichte - Teil 3: Schwingungsverfahren (ISO 2811-3:2011)Peintures et vernis - Détermination de la masse volumique - Partie 3: Méthode par oscillation (ISO 2811-3:2011)Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO 2811-3:2011)87.040Barve in lakiPaints and varnishesICS:Ta slovenski standard je istoveten z:EN ISO 2811-3:2011SIST EN ISO 2811-3:2011en,fr,de01-november-2011SIST EN ISO 2811-3:2011SLOVENSKI
STANDARDSIST EN ISO 2811-3:20021DGRPHãþD



SIST EN ISO 2811-3:2011



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 2811-3
March 2011 ICS 87.040 Supersedes EN ISO 2811-3:2001English Version
Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO 2811-3:2011)
Peintures et vernis - Détermination de la masse volumique - Partie 3: Méthode par oscillation (ISO 2811-3:2011)
Beschichtungsstoffe - Bestimmung der Dichte - Teil 3: Schwingungsverfahren (ISO 2811-3:2011) This European Standard was approved by CEN on 19 February 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 2811-3:2011: ESIST EN ISO 2811-3:2011



EN ISO 2811-3:2011 (E) 2 Contents Page Foreword .3 SIST EN ISO 2811-3:2011



EN ISO 2811-3:2011 (E) 3 Foreword This document (EN ISO 2811-3:2011) has been prepared by Technical Committee ISO/TC 35 "Paints and varnishes" in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2011, and conflicting national standards shall be withdrawn at the latest by September 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 2811-3:2001. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 2811-3:2011 has been approved by CEN as a EN ISO 2811-3:2011 without any modification.
SIST EN ISO 2811-3:2011



SIST EN ISO 2811-3:2011



Reference numberISO 2811-3:2011(E)© ISO 2011
INTERNATIONAL STANDARD ISO2811-3Second edition2011-03-01Paints and varnishes — Determination of density — Part 3: Oscillation method Peintures et vernis — Détermination de la masse volumique — Partie 3: Méthode par oscillation
SIST EN ISO 2811-3:2011



ISO 2811-3:2011(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adob
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.