Glass in building - Basic soda lime silicate glass products - Part 1: Definitions and general physical and mechanical properties

This Part of this European Standard specifies and classifies basic glass products, indicates their chemical composition, their main physical and mechanical characteristics and defines their general quality criteria. Specific dimensions and dimensional tolerances, description of faults, quality limits and designation for each basic product type are not included in this Part, but are given in other Parts of this European Standard specific to each product type: - EN 572-2 Float glass - EN 572-3 Polished wired glass - EN 572-4 Drawn sheet glass - EN 572-5 Patterned glass - EN 572-6 Wired patterned glass - EN 572-7 Wired or unwired channel shaped glass - EN 572-8 Supplied and final cut sizes - EN 572-9 Evaluation of conformity/Product standard.

Glas im Bauwesen - Basiserzeugnisse aus Kalk-Natronsilicatglas - Teil 1: Definitionen und allgemeine physikalische und mechanische Eigenschaften

Dieser Teil dieser Europäischen Norm legt die Basis Glaserzeugnisse fest und klassifiziert sie, gibt ihre chemische Zusammensetzung und die wichtigsten physikalischen und mechanischen Eigenschaften an und definiert ihre allgemeinen Qualitätskriterien.
Die spezifischen Maße, Maßtoleranzen, Fehlerbeschreibungen, Qualitätsgrenzen und Bezeichnungen der verschiedenen Arten der Basis Glaserzeugnisse sind nicht in diesem Teil der Norm enthalten, sondern in anderen Teilen dieser Europäischen Norm für die jeweiligen Erzeugnisarten:
EN 572 2   Floatglas
EN 572 3   Poliertes Drahtglas
EN 572 4   Gezogenes Flachglas
EN 572 5   Ornamentglas
EN 572 6   Drahtornamentglas
EN 572 7   Profilbauglas mit oder ohne Drahteinlage
EN 572 8   Liefermaße und Festmaße
EN 572 9   Konformitätsbewertung/Produktnorm

Verre dans la construction - Produits de base: Verre de silicate sodo-calcique - Partie 1: Définitions et propriétés physiques et mécaniques générales

La présente partie de cette Norme européenne spécifie et classe les produits verriers de base et indique leur composition chimique, leurs principales caractéristiques physiques et mécaniques et détermine leurs critères généraux de qualité.
Les dimensions et les tolérances dimensionnelles spécifiques, la description des défauts, les limites de qualité et le mode de désignation pour chaque type de produit de base ne sont pas inclus dans la présente partie de l’EN 572, mais font l’objet d’autres parties de cette norme européenne pour chaque type de produit  :
-   EN 572-2   Glace flottée
-   EN 572-3   Verre armé poli
-   EN 572-4   Verre étiré
-   EN 572-5   Verre imprimé
-   EN 572-6   Verre imprimé armé
-   EN 572-7   Verre profilé armé ou non armé
-   EN 572-8   Mesures livrées et mesures découpées finales
-   EN 572-9   Évaluation de la conformité/norme produit

Steklo v gradbeništvu - Osnovni izdelki iz natrij-kalcijevega silikatnega stekla - 1. del: Definicije in splošne fizikalne in mehanske lastnosti

Ta del tega evropskega standarda določa in razvršča osnovne izdelke iz stekla, navaja njihovo kemično sestavo, njihove glavne fizikalne in mehanske lastnosti ter določa splošna merila glede kakovosti. Specifične mere in tolerance mer, opis napak, omejitve kakovosti in označevanje za posamezen tip osnovnega izdelka niso zajeti v tem delu, ampak so navedeni v drugih delih tega evropskega standarda, specifičnih za posamezen tip izdelka: – EN 572-2 Ravno steklo – EN 572-3 Polirano žično steklo – EN 572-4 Vlečeno steklo – EN 572-5 Vzorčasto steklo – EN 572-6 Žično vzorčasto steklo – EN 572-7 Žično in brezžično utorjeno steklo – EN 572-8 Dobavljene in končne velikosti razreza – EN 572-9 Ovrednotenje skladnosti/standard za izdelek.

General Information

Status
Withdrawn
Public Enquiry End Date
28-Feb-2012
Publication Date
25-Sep-2012
Withdrawal Date
19-May-2016
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
20-May-2016
Due Date
12-Jun-2016
Completion Date
20-May-2016

RELATIONS

Buy Standard

Standard
SIST EN 572-1:2012
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day
Draft
kSIST FprEN 572-1:2012
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 572-1:2012
01-oktober-2012
1DGRPHãþD
SIST EN 572-1:2004

Steklo v gradbeništvu - Osnovni izdelki iz natrij-kalcijevega silikatnega stekla - 1.

del: Definicije in splošne fizikalne in mehanske lastnosti

Glass in building - Basic soda lime silicate glass products - Part 1: Definitions and

general physical and mechanical properties

Glas im Bauwesen - Basiserzeugnisse aus Kalk-Natronsilicatglas - Teil 1: Definitionen

und allgemeine physikalische und mechanische Eigenschaften

Verre dans la construction - Produits de base: Verre de silicate sodo-calcique - Partie 1:

Définitions et propriétés physiques et mécaniques générales
Ta slovenski standard je istoveten z: EN 572-1:2012
ICS:
01.040.81 6WHNODUVNDLQNHUDPLþQD Glass and ceramics
LQGXVWULMD 6ORYDUML industries (Vocabularies)
81.040.20 Steklo v gradbeništvu Glass in building
SIST EN 572-1:2012 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 572-1:2012
---------------------- Page: 2 ----------------------
SIST EN 572-1:2012
EUROPEAN STANDARD
EN 572-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2012
ICS 01.040.81; 81.040.20 Supersedes EN 572-1:2004
English Version
Glass in building - Basic soda lime silicate glass products - Part
1: Definitions and general physical and mechanical properties

Verre dans la construction - Produits de base: verre de Glas im Bauwesen - Basiserzeugnisse aus Kalk-

silicate sodo-calcique - Partie 1: Définitions et propriétés Natronsilicatglas - Teil 1: Definitionen und allgemeine

physiques et mécaniques générales physikalische und mechanische Eigenschaften
This European Standard was approved by CEN on 11 May 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same

status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United

Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels

© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 572-1:2012: E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 572-1:2012
EN 572-1:2012 (E)
Contents Page

Foreword ..............................................................................................................................................................3

1 Scope ......................................................................................................................................................4

2 Normative references ............................................................................................................................4

3 Terms and definitions ...........................................................................................................................5

4 General principles..................................................................................................................................5

5 Chemical composition ..........................................................................................................................5

5.1 General ....................................................................................................................................................5

5.2 Tint ..........................................................................................................................................................6

6 Physical and mechanical characteristics ............................................................................................6

6.1 General characteristics .........................................................................................................................6

6.2 Characteristic bending strength (f ) .................................................................................................7

g,kk

6.3 Designation of clear glass ....................................................................................................................7

6.3.1 General ....................................................................................................................................................7

6.3.2 Clear transparent glass .........................................................................................................................7

6.3.3 Clear translucent glass .........................................................................................................................8

6.4 Stability of physical and chemical characteristics .............................................................................9

6.5 General quality criteria and their evaluation .......................................................................................9

6.5.1 Optical .....................................................................................................................................................9

6.5.2 Appearance ............................................................................................................................................9

Bibliography ..................................................................................................................................................... 10

---------------------- Page: 4 ----------------------
SIST EN 572-1:2012
EN 572-1:2012 (E)
Foreword

This document (EN 572-1:2012) has been prepared by Technical Committee CEN/TC 129 “Glass in building”,

the secretariat of which is held by NBN.

This European Standard shall be given the status of a national standard, either by publication of an identical

text or by endorsement, at the latest by January 2013, and conflicting national standards shall be withdrawn at

the latest by January 2013.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.

This document supersedes EN 572-1:2004.

This document has been prepared under a mandate given to CEN by the European Commission and the

European Free Trade Association.

This edition is a revision of EN 572-1:2004. The main changes in this edition are:

a) a better explanation of the characteristic bending strength of glass;

b) an extension of the minimum light transmittance value for translucent glass up to 19 mm;

c) the bibliography has been complemented.

This European Standard “Glass in building — Basic soda lime silicate glass products” consists of the following

parts:
 Part 1: Definitions and general physical and mechanical properties;
 Part 2: Float glass;
 Part 3: Polished wired glass;
 Part 4: Drawn sheet glass;
 Part 5: Patterned glass;
 Part 6: Wired patterned glass;
 Part 7: Wired or unwired channel shaped glass;
 Part 8: Supplied and final cut sizes;
 Part 9: Evaluation of conformity/Product standard.

According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following

countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech

Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,

Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,

Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

---------------------- Page: 5 ----------------------
SIST EN 572-1:2012
EN 572-1:2012 (E)
1 Scope

This Part of this European Standard specifies and classifies basic glass products and indicates their chemical

composition, their main physical and mechanical characteristics and defines their general quality criteria.

Specific dimensions and dimensional tolerances, description of faults, quality limits and designation for each

basic product type are not included in this Part, but are given in other Parts of EN 572 specific to each product

type:
 EN 572-2 Float glass
 EN 572-3 Polished wired glass
 EN 572-4 Drawn sheet glass
 EN 572-5 Patterned glass
 EN 572-6 Wired patterned glass
 EN 572-7 Wired or unwired channel shaped glass
 EN 572-8 Supplied and final cut sizes
 EN 572-9 Evaluation of conformity/Product standard
2 Normative references

The following documents, in whole or in part, are normatively referenced in this document and are

indispensable for its application. For dated references, only the edition cited applies. For undated references,

the latest edition of the referenced document (including any amendments) applies.

EN 410, Glass in building — Determination of luminous and solar characteristics of glazing

EN 572-2, Glass in building — Basic soda lime silicate glass products — Part 2: Float glass

EN 572-3, Glass in building — Basic soda lime silicate glass products — Part 3: Polished wired glass

EN 572-4, Glass in building — Basic soda lime silicate glass products — Part 4: Drawn sheet glass

EN 572-5, Glass in building — Basic soda lime silicate glass products — Part 5: Patterned glass

EN 572-6, Glass in building — Basic soda lime silicate glass products — Part 6: Wired patterned glass

EN 572-7, Glass in building — Basic soda lime silicate glass products — Part 7: Wired or unwired channel

shaped glass

EN 572-8, Glass in building — Basic soda lime silicate glass products — Part 8: Supplied and final cut sizes

EN 572-9, Glass in building — Basic soda lime silicate glass products — Part 9: Evaluation of

conformity/Product standard
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Steklo v gradbeništvu - Osnovni izdelki iz natrij-kalcijevega silikatnega stekla - 1. del: Definicije in splošne fizikalne in mehanske lastnostiGlas im Bauwesen - Basiserzeugnisse aus Kalk-Natronsilicatglas - Teil 1: Definitionen und allgemeine physikalische und mechanische EigenschaftenVerre dans la construction - Produits de base: Verre de silicate sodo-calcique - Partie 1: Définitions et propriétés physiques et mécaniques généralesGlass in building - Basic soda lime silicate glass products - Part 1: Definitions and general physical and mechanical properties81.040.20Steklo v gradbeništvuGlass in building01.040.81Glass and ceramics industries (Vocabularies)ICS:Ta slovenski standard je istoveten z:FprEN 572-1kSIST FprEN 572-1:2012en,fr,de01-januar-2012kSIST FprEN 572-1:2012SLOVENSKI

STANDARD
kSIST FprEN 572-1:2012
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN 572-1

November 2011 ICS 81.040.20; 01.040.81 Will supersede EN 572-1:2004English Version

Glass in building - Basic soda lime silicate glass products - Part 1: Definitions and general physical and mechanical properties

Verre dans la construction - Produits de base: Verre de silicate sodo-calcique - Partie 1: Définitions et propriétés physiques et mécaniques générales

Glas im Bauwesen - Basiserzeugnisse aus Kalk-Natronsilicatglas - Teil 1: Definitionen und allgemeine physikalische und mechanische Eigenschaften This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee CEN/TC 129.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,

B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN 572-1:2011: EkSIST FprEN 572-1:2012

FprEN 572-1:2011 (E) 2 Contents Page Foreword ..............................................................................................................................................................31 Scope ......................................................................................................................................................42 Normative references ............................................................................................................................43 Terms and definitions ...........................................................................................................................54 General principles..................................................................................................................................55 Chemical composition ..........................................................................................................................55.1 General ....................................................................................................................................................55.2 Tint ..........................................................................................................................................................66 Physical and mechanical characteristics ............................................................................................66.1 General characteristics .........................................................................................................................66.2 Characteristic bending strength (fg,kk) .................................................................................................76.3 Designation of clear glass ....................................................................................................................76.3.1 General ....................................................................................................................................................76.3.2 Clear transparent glass .........................................................................................................................76.3.3 Clear translucent glass .........................................................................................................................86.4 Stability of physical and chemical characteristics .............................................................................96.5 General quality criteria and their evaluation .......................................................................................96.5.1 Optical .....................................................................................................................................................96.5.2 Appearance ............................................................................................................................................9Bibliography ..................................................................................................................................................... 10

kSIST FprEN 572-1:2012

FprEN 572-1:2011 (E) 3 Foreword This document (FprEN 572-1:2011) has been prepared by Technical Committee CEN/TC 129 “Glass in building”, the secretariat of which is held by NBN. This document will supersede EN 572-1:2004. This document is currently submitted to the Unique Acceptance Procedure. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. This European Standard “Glass in building — Basic soda lime silicate glass products” consists of the following parts:  Part 1: Definitions and general physical and mechanical properties;  Part 2: Float glass;  Part 3: Polished wired glass;  Part 4: Drawn sheet glass;  Part 5: Patterned glass;  Part 6: Wired patterned glass;  Part 7: Wired or unwired channel shaped glass;  Part 8: Supplied and final cut sizes;  Part 9: Evaluation of conformity/Product standard.

kSIST FprEN 572-1:2012
FprEN 572-1:2011 (E) 4

1 Scope This Part of this European Standard specifies and classifies basic glass products, indicates their chemical composition, their main physical and mechanical characteristics and defines their general quality criteria. Specific dimensions and dimensional tolerances, description of faults, quality limits and designation for each basic product type are not included in this Part, but are given in other Parts of this European Standard specific to each product type: EN 572-2 Float glass EN 572-3 Polished wired glass EN 572-4 Drawn sheet glass EN 572-5 Patterned glass EN 572-6 Wired patterned glass EN 572-7 Wired or unwired channel shaped glass EN 572-8 Supplied and final cut sizes EN 572-9 Evaluation of conformity/Product standard 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 410, Glass in building — Determination of luminous and solar characteristics of glazing EN 572-2, Glass in building — Basic soda lime silicate glass products — Part 2: Float glass EN 572-3, Glass in building — Basic soda lime silicate glass products — Part 3: Polished wired glass EN 572-4, Glass in building — Basic soda lime silicate glass products — Part 4: Drawn sheet glass EN 572-5, Glass in building — Basic soda lime silicate glass products — Part 5: Patterned glass EN 572-6, Glass in building — Basic soda lime silicate glass products — Part 6: Wired patterned glass EN 572-7, Glass in building — Basic soda lime silicate glass products — Part 7: Wired or unwired channel shaped glass EN 572-8, Glass in building — Basic soda lime silicate glass products — Part 8: Supplied and final cut sizes EN 572-9, Glass in building — Basic soda lime silicate glass products — Part 9: Evaluation of conformity/Product standard ISO 9385, Glass and glass-ceramics — Knoop hardness test kSIST FprEN 572-1:2012

FprEN 572-1:2011 (E) 5 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 float flat, transparent, clear or tinted soda-lime silicate glass having parallel and polished faces obtained by continuous casting and floatation

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.