81.060.01 - Ceramics in general
ICS 81.060.01 Details
Ceramics in general
Keramik im allgemeinen
Ceramiques en general
Keramika na splošno
General Information
ISO 14719:2011 specifies a spectral photometric method with 1,10-phenanthroline for the quantitative determination of Fe2+ and Fe3+ in oxidic raw and basic materials for ceramics, glass and glazes, e.g. feldspar, kaolinites, clay, limestone, quartz refractory materials. ISO 14719:2011 could be extended to other aluminosilicate materials, providing that uncertainty data is produced to support it. However, there might be problems in the decomposition of high-purity alumina and chrome ore samples.
The method is not suitable for reduced materials, such as silicon carbide, graphite-magnesia, etc.
- Standard20 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 14719:2011 specifies a spectral photometric method with 1,10-phenanthroline for the quantitative determination of Fe2+ and Fe3+ in oxidic raw and basic materials for ceramics, glass and glazes, e.g. feldspar, kaolinites, clay, limestone, quartz refractory materials. ISO 14719:2011 could be extended to other aluminosilicate materials, providing that uncertainty data is produced to support it. However, there might be problems in the decomposition of high-purity alumina and chrome ore samples. The method is not suitable for reduced materials, such as silicon carbide, graphite-magnesia, etc.
- Standard13 pagesEnglish languagesale 15% off
- Standard13 pagesFrench languagesale 15% off
ISO 21078-1:2008 specifies methods of determining boron(III) oxide in refractory products and raw materials, in mass fractions of 0,01 % or greater. It is applicable to the determination of total boron(111) oxide in oxidic materials for ceramics, glass and glazes.
- Standard23 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 21078-2:2006 specifies procedures of chemical analysis for the determination of boron(III) oxide used as a binder component added to aluminosilicate refractories, using an acid extraction method.
It is applicable for refractories containing less than 1 % (mass fraction) of boron(III) oxide.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 21078-1:2008 specifies methods of determining boron(III) oxide in refractory products and raw materials, in mass fractions of 0,01 % or greater. It is applicable to the determination of total boron(111) oxide in oxidic materials for ceramics, glass and glazes.
- Standard16 pagesEnglish languagesale 15% off
- Standard17 pagesFrench languagesale 15% off
ISO 21078-2:2006 specifies procedures of chemical analysis for the determination of boron(III) oxide used as a binder component added to aluminosilicate refractories, using an acid extraction method. It is applicable for refractories containing less than 1 % (mass fraction) of boron(III) oxide.
- Standard10 pagesEnglish languagesale 15% off
- Standard11 pagesFrench languagesale 15% off
This document covers the evaluation of conformity and the factory production control of glass ceramics for use in buildings.
Note: For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.
- Standard34 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard3 pagesEnglish languagesale 15% off
- Standard3 pagesFrench languagesale 15% off
- Standard3 pagesFrench languagesale 15% off
This standard specifies the characterization of ceramic slurry for use as feedstock in vat photopolymerization additive manufacturing (AM) process. The characterization includes the composition and properties of the slurry, such as solids content, dynamic viscosity, particle size distribution, chemical composition, and solid dispersion stability. This standard also provides available methods about sampling and preparing slurry samples for testing. This standard does not deal with safety aspects.
- Draft15 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies and classifies special basic products - glass ceramics, indicates their chemical composition, their main physical and mechanical characteristics, their dimensional and minimum quality requirements (in respect of optical and visual faults).
This European Standard applies to special basic products - glass ceramics supplied in stock sizes, supplied sizes or in cut sizes for final end use.
This European Standard does not apply to final cut sizes having a dimension less than 100 mm or a surface area less than 0,05 m2.
- Draft19 pagesEnglish languagesale 10% offe-Library read for1 day
This European standard covers the evaluation of conformity and the factory production control of basic glass ceramics for use in buildings.
NOTE For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.
- Draft33 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies and classifies special basic products - glass ceramics, indicates their chemical composition, their main physical and mechanical characteristics, their dimensional and minimum quality requirements (in respect of optical and visual faults).
This European Standard applies to special basic products - glass ceramics supplied in stock sizes, supplied sizes or in cut sizes for final end use.
This European Standard does not apply to final cut sizes having a dimension less than 100 mm or a surface area less than 0,05 m2.
- Draft19 pagesEnglish languagesale 10% offe-Library read for1 day
This European standard covers the evaluation of conformity and the factory production control of basic glass ceramics for use in buildings.
NOTE For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.
- Draft33 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard defines, specifies and classifies glass ceramics for use in building. It indicates their chemical composition, main physical and mechanical properties, dimensional and minimum quality requirements (in respect of optical and visual faults). This standard applies only to glass ceramics supplied in stock sizes. This standard does not apply to glass ceramics suppliedin cut sizes for final end use.
- Standard13 pagesEnglish languagesale 10% offe-Library read for1 day
- Technical report62 pagesEnglish languagesale 15% off