iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 598:1998

(Main)

Ductile iron pipes, fittings, accessories and their joints for sewerage application - Requirements and test methods

Ductile iron pipes, fittings, accessories and their joints for sewerage application - Requirements and test methods

This European Standard specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints for the construction of drains and sewers outside buildings: - operating without pressure, or with positive or negative pressure; - installed below or above ground; - for conveyance of surface water, domestic waste water and certain types of industrial effluents, either in separate systems or in mixed systems.

Rohre, Formstücke, Zubehörteile aus duktilem Gußeisen und ihre Verbindungen für die Abwasser-Entsorgung - Anforderungen und Prüfverfahren

Diese europäische Norm legt die Anforderungen  und Prüfverfahren fest, die auf duktile Gussrohre, Formstücke, Zubehörteile und ihre Verbindungen anwendbar sind zur Errichtung von Entwässerungs- und Abwasserleitungen ausserhalb von Gebäuden, und zwar: - zum Betrieb als Freispiegelleitung sowie unter positivem oder negativem Druck; - erdverlegt oder oberirdisch verlegt; - zum Transport von Oberflächenwasser, häuslichem Abwasser und bestimmten Arten von Industrieabwässern, entweder im Trenn- oder im Mischwassersystem.

Tuyaux, raccords et accessoires en fonte ductile et leurs assemblages pour l'assainissement - Prescriptions et méthodes d'essai

La présente norme européenne prescrit les exigences et les méthodes d'essai applicables aux tuyaux, raccords et accessoires en fonte ductile et a leurs assemblages, destinés a la construction de collecteurs et de branchements d'assainissement a l'extérieur des bâtiments: - fonctionnant sans ou avec pression positive ou négative; - installés sur le sol ou en aérien, - pour transporter les eaux de surface, les eaux usées domestiques et certains types d'effluents industriels, en systeme séparatif ou en systeme mixte.

Cevi, fitingi in dodatki iz duktilne litine za kanalizacijo - Zahteve in postopki preskušanja

General Information

Status
Withdrawn
Publication Date
30-Sep-1998
Withdrawal Date
10-Feb-2010
ICS
23.040.10 - Iron and steel pipes
23.040.40 - Metal fittings
93.030 - External sewage systems
Technical Committee
TLP - Pressure vessels
Current Stage
9990 - Retro Withdrawal (Adopted Project)
Start Date
05-Feb-2010
Due Date
28-Feb-2010
Completion Date
11-Feb-2010
Directive
89/106/EEC - Construction products
93/38/EEC - Procurement procedures of entities operating in the water, energy, transport and telecommunications sectors
Mandate
M/BC/CEN/88/15 - Standardization request to CEN/CENELEC in the field of Water supply, drainage and sewerage
Ref Project
EN 598:1994 - Ductile iron pipes, fittings, accessories and their joints for sewerage application - Requirements and test methods

Relations

Replaced By
SIST EN 598:2008 - Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods
Effective Date
01-Mar-2008

Buy Standard

EN 598:1998EN 598:1998
PreviousNext
Standard
EN 598:1998
English language
57 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Cevi, fitingi in dodatki iz duktilne litine za kanalizacijo - Zahteve in postopki preskušanjaRohre, Formstücke, Zubehörteile aus duktilem Gußeisen und ihre Verbindungen für die Abwasser-Entsorgung - Anforderungen und PrüfverfahrenTuyaux, raccords et accessoires en fonte ductile et leurs assemblages pour l'assainissement - Prescriptions et méthodes d'essaiDuctile iron pipes, fittings, accessories and their joints for sewerage application - Requirements and test methods93.030Zunanji sistemi za odpadno vodoExternal sewage systems23.040.40Kovinski fitingiMetal fittings23.040.10Železne in jeklene ceviIron and steel pipesICS:Ta slovenski standard je istoveten z:EN 598:1994SIST EN 598:1998en01-oktober-1998SIST EN 598:1998SLOVENSKI
STANDARD



SIST EN 598:1998



SIST EN 598:1998



SIST EN 598:1998



SIST EN 598:1998



SIST EN 598:1998



SIST EN 598:1998



SIST EN 598:1998



SIST EN 598
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST-TP CEN/TR 16017:2010(Main)
Guide to the use of EN 598
CEN/TR 16017:2010

EN 598 specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints for the construction of drains and sewers outside buildings:
- operating without pressure (gravity sewerage), or with positive or negative pressure;
- to be installed below or above ground;
- to convey surface water, domestic waste water and certain types of industrial effluents, either in separate systems or in combined systems.
This technical report:
- explains in more detail the process of testing for the performance tests;
- explains in more detail the benefits of high alumina cement lining;
- explains in more detail the definitions of the different types/levels of attestation to enable customers to ensure their requirements are fulfilled;
- explains in more detail the ways of certification of conformity with EN 598 for a reliable evaluation of the performance of products;
- explains in more detail CE marking and its relevance i.e. the CE mark is not a mark of conformity with a standard but only a self-declaration concerning the CPD essential requirements.
In order to make the use of this Technical Report easier, the clauses of this document refer to the
corresponding clause numbers in EN 598.

  • Technical report
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 598:2008+A1:2009(Main)
Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods
EN 598:2007+A1:2009

This European Standard specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints for the construction of drains and sewers outside buildings:
-   operating without pressure (gravity sewerage), or with positive or negative pressure (see Table 5);
-   to be installed below or above ground;
-   to convey surface water, domestic waste water and certain types of industrial effluents, either in separate systems or in combined systems.
This European Standard applies to pipes, fittings and accessories which are:
-   manufactured with socketed, flanged or spigot ends;
-   normally delivered externally and internally coated;
-   suitable for continuous fluid temperatures between 0 °C excluding frost, and 45 °C for DN - 200 or 35 °C for
DN - 200, according to EN 476;
-   not intended for use in areas subject to reaction to fire regulations.
NOTE 1   This does not preclude special arrangements for the products to be used at higher temperatures.
This European Standard covers pipes, fittings and accessories cast by any type of foundry process or manufactured by fabrication of cast components, as well as corresponding joints, of a size range extending from DN 80 to DN 2000 inclusive.
This European Standard specifies requirements for materials, dimensions and tolerances, mechanical properties and standard coatings of ductile iron pipes and fittings. It also gives performance requirements for all components including joints. Joint design and gasket shapes are outside the scope of this European Standard.
NOTE 2   In this European Standard, all pressures are relative pressures, expressed in bars (100 kPa = 1 bar).

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 598:2017(Main)
Coated and lined ductile iron pipes, fittings and their joints for sewerage and drainage applications - Products characteristics and test and assessment methods
prEN 598

This European Standard specifies the products characteristics and associated test and assessment methods applicable to coated and lined ductile iron pipes, coated and lined fittings and joints which include (non-¬exhaustive list) coated and lined accessories such as collar, tees, saddles, bends, tapers, flanged socket.
Intended use: Gravity and pressure drains and sewers:
-   operating without pressure, or with positive or negative pressure;
-   installed below or above ground;
-   for conveyance of surface water, wastewater in separate systems or in combined systems.

  • Draft
    75 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 16017:2010(Main)
Guide to the use of EN 598
CEN/TR 16017:2010

EN 598 specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints for the construction of drains and sewers outside buildings:
- operating without pressure (gravity sewerage), or with positive or negative pressure;
- to be installed below or above ground;
- to convey surface water, domestic waste water and certain types of industrial effluents, either in separate systems or in combined systems.
This technical report:
- explains in more detail the process of testing for the performance tests;
- explains in more detail the benefits of high alumina cement lining;
- explains in more detail the definitions of the different types/levels of attestation to enable customers to ensure their requirements are fulfilled;
- explains in more detail the ways of certification of conformity with EN 598 for a reliable evaluation of the performance of products;
- explains in more detail CE marking and its relevance i.e. the CE mark is not a mark of conformity with a standard but only a self-declaration concerning the CPD essential requirements.
In order to make the use of this Technical Report easier, the clauses of this document refer to the
corresponding clause numbers in EN 598.

  • Technical report
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 598:2008+A1:2009(Main)
Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods
EN 598:2007+A1:2009

This European Standard specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints for the construction of drains and sewers outside buildings:
-   operating without pressure (gravity sewerage), or with positive or negative pressure (see Table 5);
-   to be installed below or above ground;
-   to convey surface water, domestic waste water and certain types of industrial effluents, either in separate systems or in combined systems.
This European Standard applies to pipes, fittings and accessories which are:
-   manufactured with socketed, flanged or spigot ends;
-   normally delivered externally and internally coated;
-   suitable for continuous fluid temperatures between 0 °C excluding frost, and 45 °C for DN - 200 or 35 °C for
DN - 200, according to EN 476;
-   not intended for use in areas subject to reaction to fire regulations.
NOTE 1   This does not preclude special arrangements for the products to be used at higher temperatures.
This European Standard covers pipes, fittings and accessories cast by any type of foundry process or manufactured by fabrication of cast components, as well as corresponding joints, of a size range extending from DN 80 to DN 2000 inclusive.
This European Standard specifies requirements for materials, dimensions and tolerances, mechanical properties and standard coatings of ductile iron pipes and fittings. It also gives performance requirements for all components including joints. Joint design and gasket shapes are outside the scope of this European Standard.
NOTE 2   In this European Standard, all pressures are relative pressures, expressed in bars (100 kPa = 1 bar).

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 598:2017(Main)
Coated and lined ductile iron pipes, fittings and their joints for sewerage and drainage applications - Products characteristics and test and assessment methods
prEN 598

This European Standard specifies the products characteristics and associated test and assessment methods applicable to coated and lined ductile iron pipes, coated and lined fittings and joints which include (non-¬exhaustive list) coated and lined accessories such as collar, tees, saddles, bends, tapers, flanged socket.
Intended use: Gravity and pressure drains and sewers:
-   operating without pressure, or with positive or negative pressure;
-   installed below or above ground;
-   for conveyance of surface water, wastewater in separate systems or in combined systems.

  • Draft
    75 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 12349:2023(Main)
Mechanical vibration - Guide to the health effects of vibration on the human body
CEN/TR 12349:2023

The aim of this CEN report is to provide information on the possible adverse health effects caused by exposure to vibration at work.  the report addresses manufacturers as well as employers and employees using vibrating machinery in order to improve their understanding of the possible health problems arising from occupational exposure to vibration.

  • Technical report
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 80004-1:2023(Main)
Nanotechnologies - Vocabulary - Part 1: Core vocabulary (ISO 80004-1:2023)
EN ISO 80004-1:2023

This document defines core terms in the field of nanotechnology. This document is intended to facilitate communication between organizations and individuals in industry and those who interact with them.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3262-22:2023(Main)
Extenders - Specifications and methods of test - Part 22: Flux-calcined kieselguhr (ISO 3262-22:2023)
EN ISO 3262-22:2023

This document specifies requirements and corresponding methods of test for flux-calcined kieselguhr.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 18473-4:2023(Main)
Functional pigments and extenders for special applications - Part 4: Nanoscale titanium dioxide for photocatalytic application (ISO 18473-4:2022)
EN ISO 18473-4:2023

This document specifies requirements and corresponding test methods for nanoscale titanium dioxide (TiO2) in either powder or suspension form for photocatalytic application.
This document is applicable to modified nanoscale titanium dioxide for photocatalytic application. Such modification can be surface treatment, coating, doping and combination thereof.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day