SIST EN 62453-303-2:2010

Field device tool interface specification -- Part 303-2: Communication profile integration - IEC 61784 CP 3/4, CP 3/5 and CP 3/6

Communication Profile 3/4, Communication Profile 3/5 and Communication Profile 3/6 (commonly known as PROFINET®1 IO) define communication profiles based on IEC 61158-5-10 and IEC 61158-6-10. The basic profiles CP 3/4, CP 3/5, and CP 3/6 are defined in IEC 61784-2. This part of IEC 62453 provides information for integrating the PROFINET® technology into the FDT interface (IEC 62453-2). This part of the IEC 62453 specifies communication and other services. This specification neither contains the FDT specification nor modifies it.

Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 303-2: Integration von Kommunikationsprofilen - IEC 61784 Kommunikationsprofile (CP) 3/4, 3/5 und 3/6

Spécification des interfaces des outils des dispositifs de terrain (FDT) - Partie 303-2: Intégration des profils de communication - CEI 61784 CP 3/4, CP 3/5 et CP 3/6

La CEI 62453-303-2:2009 fournit des informations sur l'intégration de la technologie PROFINET® dans l'interface du FDT (CEI 62453-2). Elle spécifie la communication et d'autres services. La présente partie, conjointement aux autres parties de la première édition de la série CEI 62453, annule et remplace la CEI/PAS 62453-1, la CEI/PAS 62453-2, la CEI/PAS 62453-3, la CEI/PAS 62453-4 et la CEI/PAS 62453-5 publiées en 2006, et constitue une révision technique. La présente version bilingue (2013-07) correspond à la version anglaise monolingue publiée en 2009-06.
Cette publication doit être lue conjointement avec la CEI 62453-2:2009.

Specifikacija vmesnika orodja procesne naprave - 303-2. del: Integracija komunikacijskih profilov - IEC 61784 CP 3/4, CP 3/5 in CP 3/6 (IEC 62453-303-2:2009)

Komunikacijski profil 3/4, komunikacijski profil 3/5 in komunikacijski profil 3/6 (splošno znani kot PROFINET®1 IO) opredeljujejo  komunikacijske profile na osnovi IEC 61158-5-10 in IEC 61158-6-10. Osnovni profili CP 3/4, CP 3/5 in CP 3/6 so določeni v IEC 61784-2. Ta del IEC 62453 podaja informacije za integriranje PROFINET® tehnologije v vmesnik orodja procesne naprave(IEC 62453-2). Ta del IEC 62453 opredeljuje komunikacijo in druge storitve. Ta specifikacija ne vsebuje specifikacije orodja procesne naprave niti je ne spreminja.

General Information

• Status: Published
• Publication Date: 15-Dec-2009
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.240.50 - IT applications in industry
• Technical Committee: MOV - Measuring equipment for electromagnetic quantities
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 26-Nov-2009
• Due Date: 31-Jan-2010
• Completion Date: 16-Dec-2009
• Ref Project: EN 62453-303-2:2009 - Field device tool (FDT) interface specification - Part 303-2: Communication profile integration - IEC 61784 CP 3/4, CP 3/5 and CP 3/6

Relations

• Amended By: SIST EN 62453-303-2:2010/A1:2018 - Field device tool (FDT) interface specification - Part 303-2: Communication profile integration - IEC 61784 CP 3/4, CP 3/5 and CP3/6 (IEC 62453-303-2:2009/A1:2016)
• Effective Date: 13-Nov-2017

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62453-303-2:2010
01-januar-2010
Specifikacija vmesnika orodja procesne naprave - 303-2. del: Integracija
komunikacijskih profilov - IEC 61784 CP 3/4, CP 3/5 in CP 3/6 (IEC 62453-303-
2:2009)
Field device tool interface specification -- Part 303-2: Communication profile integration -
IEC 61784 CP 3/4, CP 3/5 and CP 3/6
Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 303-2: Integration von
Kommunikationsprofilen - IEC 61784 Kommunikationsprofile (CP) 3/4, 3/5 und 3/6
Spécification des interfaces des outils des dispositifs de terrain (FDT) - Partie 303-2:
Intégration des profils de communication - CEI 61784 CP 3/4, CP 3/5 et CP 3/6
Ta slovenski standard je istoveten z: EN 62453-303-2:2009
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
SIST EN 62453-303-2:2010 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62453-303-2:2010

---------------------- Page: 2 ----------------------

SIST EN 62453-303-2:2010


EUROPEAN STANDARD
EN 62453-303-2

NORME EUROPÉENNE
October 2009
EUROPÄISCHE NORM

ICS 25.040.40; 35.100.05; 35.110



English version


Field device tool (FDT) interface specification -
Part 303-2: Communication profile integration -
IEC 61784 CP 3/4, CP 3/5 and CP 3/6
(IEC 62453-303-2:2009)



Spécification des interfaces des outils Field Device Tool (FDT)-
des dispositifs de terrain (FDT) - Schnittstellenspezifikation -
Partie 303-2: Intégration des profils Teil 303-2: Integration
de communication - von Kommunikationsprofilen -
CEI 61784 CP 3/4, CP 3/5 et CP 3/6 Kommunikationsprofile (CP)
(CEI 62453-303-2:2009) 3/4, 3/5 und 3/6 nach IEC 61784
(IEC 62453-303-2:2009)




This European Standard was approved by CENELEC on 2009-08-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels


© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62453-303-2:2009 E

---------------------- Page: 3 ----------------------

SIST EN 62453-303-2:2010
EN 62453-303-2:2009 - 2 -
Foreword
The text of document 65E/128/FDIS, future edition 1 of IEC 62453-303-2, prepared by SC 65E, Devices and
integration in enterprise systems, of IEC TC 65, Industrial-process measurement, control and automation,
was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62453-303-2 on
2009-08-01.
Each part of the EN 62453-3xy series is intended to be read in conjunction with EN 62453-2.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-05-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-08-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62453-303-2:2009 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 61158 NOTE  Harmonized in EN 61158 series (not modified).
__________

---------------------- Page: 4 ----------------------

SIST EN 62453-303-2:2010
- 3 - EN 62453-303-2:2009
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

1) 2)
IEC 61158-5-10 – Industrial communication networks - EN 61158-5-10 2008
Fieldbus specifications -
Part 5-10: Application layer service definition -
Type 10 elements


1) 2)
IEC 61158-6-10 – Industrial communication networks - EN 61158-6-10 2008
Fieldbus specifications -
Part 6-10: Application layer protocol
specification - Type 10 elements


1) 2)
IEC 61784-2 – Industrial communication networks - EN 61784-2 2008
Profiles -
Part 2: Additional fieldbus profiles for real-time
networks based on ISO/IEC 8802-3


IEC 62453-1 2009 Field device tool (FDT) interface specification - EN 62453-1 2009
Part 1: Overview and guidance


IEC 62453-2 2009 Field device tool (FDT) interface specification - EN 62453-2 2009
Part 2: Concepts and detailed description




1)
Undated reference.
2)
Valid edition at date of issue.

---------------------- Page: 5 ----------------------

SIST EN 62453-303-2:2010

---------------------- Page: 6 ----------------------

SIST EN 62453-303-2:2010
IEC 62453-303-2
®
Edition 1.0 2009-06
INTERNATIONAL
STANDARD


Field device tool (FDT) interface specification –
Part 303-2: Communication profile integration – IEC 61784 CP 3/4, CP 3/5 and
CP 3/6


INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
V
ICS 25.040.40; 35.100.05; 35.110 ISBN 2-8318-1050-2
® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 7 ----------------------

SIST EN 62453-303-2:2010
– 2 – 62453-303-2 © IEC:2009(E)
CONTENTS
FOREWORD.4
INTRODUCTION.6
1 Scope.7
2 Normative references .7
3 Terms, definitions, symbols, abbreviated terms and conventions .7
3.1 Terms and definitions .7
3.2 Abbreviated terms .8
3.3 Conventions .8
3.3.1 Data type names and references to data types .8
3.3.2 Vocabulary for requirements.8
3.3.3 Use of UML .8
4 Bus category .8
5 Access instance and device data.9
5.1 Process Channel objects provided by DTM.9
5.2 DTM services to access instance and device data .9
6 Protocol specific behavior.9
7 Protocol specific usage of general data types .9
8 Protocol specific common data types.11
9 Network management data types.11
9.1 General .11
9.2 Parameter access data types .11
10 Communication data types .17
11 Channel parameter data types.20
12 Device identification .23
12.1 Protocol specific handling of data type STRING .23
12.2 Device type identification data types .23
12.3 Topology scan data types.26
12.4 Scan identification data types.27
12.5 Device type identification data types .29
Bibliography.32

Figure 1 – Part 303-2 of the IEC 62453 series .6

Table 1 – Protocol identifier .8
Table 2 – Physical layer identifier .8
Table 3 – Protocol specific usage of general data types.9
Table 4 – Simple parameter access data types .11
Table 5 – Structured parameter access data types.14
Table 6 – Simple communication data types .17
Table 7 – Structured communication data types.18
Table 8 – Simple channel parameter data types.21
Table 9 – Structured channel parameter data types .22
Table 10 – Identification data types for PROFINET with pure DCP.24

---------------------- Page: 8 ----------------------

SIST EN 62453-303-2:2010
62453-303-2 © IEC:2009(E) – 3 –
Table 11 – Identification data types for PROFINET with I&M.25
Table 12 – Simple identification data types with protocol independent semantics.26
Table 13 – Structured identification data types with protocol independent semantics .26
Table 14 – Simple device type identification data types .26
Table 15 – Structured device type identification data type.27
Table 16 – Simple scan identification data types.27
Table 17 – Structured scan identification data types .28
Table 18 – Structured device type identification data types .29

---------------------- Page: 9 ----------------------

SIST EN 62453-303-2:2010
– 4 – 62453-303-2 © IEC:2009(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION –

Part 303-2: Communication profile integration –
IEC 61784 CP 3/4, CP 3/5 and CP 3/6


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62453-303-2 has been prepared by subcommittee 65E: Devices
and integration in enterprise systems, of IEC technical committee 65: Industrial-process
measurement, control and automation.
This part, in conjunction with the other parts of the first edition of the IEC 62453 series
cancels and replaces IEC/PAS 62453-1, IEC/PAS 62453-2, IEC/PAS 62453-3, IEC/PAS
62453-4 and IEC/PAS 62453-5 published in 2006, and constitutes a technical revision.
Each part of the IEC 62453-3xy series is intended to be read in conjunction with IEC 62453-2.

---------------------- Page: 10 ----------------------

SIST EN 62453-303-2:2010
62453-303-2 © IEC:2009(E) – 5 –
The text of this standard is based on the following documents:
FDIS Report on voting
65E/128/FDIS 65E/141/RVD

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of the IEC 62453 series, under the general title Field Device Tool (FDT)
interface specification, can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.

---------------------- Page: 11 ----------------------

SIST EN 62453-303-2:2010
– 6 – 62453-303-2 © IEC:2009(E)
INTRODUCTION
This part of IEC 62453 is an interface specification for developers of FDT (Field Device Tool)
components for function control and data access within a client/server architecture. The
specification is a result of an analysis and design process to develop standard interfaces to
facilitate the development of servers and clients by multiple vendors that need to interoperate
seamlessly.
With the integration of fieldbusses into control systems, there are a few other tasks which
need to be performed. In addition to fieldbus- and device-specific tools, there is a need to
integrate these tools into higher-level system-wide planning- or engineering tools. In
particular, for use in extensive and heterogeneous control systems, typically in the area of the
process industry, the unambiguous definition of engineering interfaces that are easy to use for
all those involved is of great importance.
A device-specific software component, called DTM (Device Type Manager), is supplied by the
field device manufacturer with its device. The DTM is integrated into engineering tools via the
FDT interfaces defined in this specification. The approach to integration is in general open for
all kinds of fieldbusses and thus meets the requirements for integrating different kinds of
devices into heterogeneous control systems.
Figure 1 shows how IEC 62453-303-2 is aligned in the structure of the IEC 62453 series.
Part 303-2
Communication
profile integration –
IEC 61784 CP 3/4,
CP 3/5 and CP 3/6
IEC  1132/09

Figure 1 – Part 303-2 of the IEC 62453 series

---------------------- Page: 12 ----------------------

SIST EN 62453-303-2:2010
62453-303-2 © IEC:2009(E) – 7 –
FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION –

Part 303-2: Communication profile integration –
IEC 61784 CP 3/4, CP 3/5 and CP 3/6



1 Scope
Communication Profile 3/4, Communication Profile 3/5 and Communication Profile 3/6
1
(commonly known as PROFINET® IO) define communication profiles based on
IEC 61158-5-10 and IEC 61158-6-10. The basic profiles CP 3/4, CP 3/5, and CP 3/6 are
defined in IEC 61784-2.
This part of IEC 62453 provides information for integrating the PROFINET® technology into
the FDT interface (IEC 62453-2).
This part of the IEC 62453 specifies communication and other services.
This specification neither contains the FDT specification nor modifies it.
2 Normative references
The following referenced documents are indispensable for the application of this specification.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies
IEC 61158-5-10, Industrial communication networks – Fieldbus specifications – Part 5-10:
Application layer service definition – Type 10 elements
IEC 61158-6-10, Industrial communication networks – Fieldbus specifications – Part 6-10:
Application layer protocol specification – Type 10 elements
IEC 61784-2 Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles
for real-time networks based on ISO/IEC 8802-3
IEC 62453-1:2009, Field Device Tool (FDT) interface specification – Part 1: Overview and
guidance
IEC 62453-2:2009, Field Device Tool (FDT) interface specification – Part 2: Concepts and
detailed description
3 Terms, definitions, symbols, abbreviated terms and conventions
3.1 Terms and definitions
For the purposes of this document, the terms and definitions given in IEC 62453-1 and
IEC 62453-2 apply.
—————————
1
 PROFINET ® is the trademark of PROFIBUS Nutzerorganisation e.V. (PNO). PNO is a non-profit trade
organization to support the fieldbus PROFIBUS. This information is given for the convenience of users of this
International Standard and does not constitute an endorsement by IEC of the trademark holder or any of its
products. Compliance to this profile does not require use of the registered trademark. Use of the trademark
PROFIBUS and PROFINET requires permission of the trade name holder.

---------------------- Page: 13 ----------------------

SIST EN 62453-303-2:2010
– 8 – 62453-303-2 © IEC:2009(E)
3.2 Abbreviated terms
For the purposes of this document, the abbreviations given in IEC 62453-1 and IEC 62453-2
and the following apply.
AR Application Relation
DCP Discovery and basic Configuration Protocol
GSDML Generic Station Description Markup Language
IOCS IO Consumer Status
IOPS IO Provider Status
UML Unified Modeling Language

3.3 Conventions
3.3.1 Data type names and references to data types
The conventions for naming and referencing of data types are explained in IEC 62453-2,
Clause A.1
3.3.2 Vocabulary for requirements
The following expressions are used when specifying requirements.
Usage of “shall” or “mandatory” No exceptions allowed.
Usage of “should” or “recommended” Strong recommendation. It may make sense in special
exceptional cases to differ from the described behaviour.
Usage of “can’ or “optional’ Function or behaviour may be provided, depending on
defined conditions.
3.3.3 Use of UML
Figures in this document are using UML notation as defined in Annex A of IEC 62453-1.
4 Bus category
IEC 61784 CP 3/4, CP 3/5 and CP 3/6 protocols are identified in the protocolId element of the
structured data type 'fdt:BusCategory' by the following unique identifier as defined in Table 1:
Table 1 – Protocol identifier
Identifier value ProtocolId name Description
DFC98364-DAB8-493B-BB92-23B3F92FEBCD ‘Profinet IO’ Support of IEC 61784 CP 3/4,
CP 3/5 and CP 3/6 protocols

IEC 61784 CP 3/4, CP 3/5 and CP 3/6 use the following unique identifier for its physical
layers.
Table 2 – Physical layer identifier
PhysicalLayer element Description
99C36176-E59A-11DA-9023-0002B3ECDCBE 10BASET
99C36177-E59A-11DA-9023-0002B3ECDCBE 10BASETXHD
99C36178-E59A-11DA-9023-0002B3ECDCBE 10BASETXFD
99C36179-E59A-11DA-9023-0002B3ECDCBE 100BASETXHD
99C3617A-E59A-11DA-9023-0002B3ECDCBE 100BASETXFD

---------------------- Page: 14 ----------------------

SIST EN 62453-303-2:2010
62453-303-2 © IEC:2009(E) – 9 –
PhysicalLayer element Description
99C3617B-E59A-11DA-9023-0002B3ECDCBE 10BASEFXHD
99C3617C-E59A-11DA-9023-0002B3ECDCBE 10BASEFXFD
99C3617D-E59A-11DA-9023-0002B3ECDCBE 1000BASEXHD
99C3617E-E59A-11DA-9023-0002B3ECDCBE 1000BASEXFD
99C3617F-E59A-11DA-9023-0002B3ECDCBE 1000BASELXHD
99C36180-E59A-11DA-9023-0002B3ECDCBE 1000BASELXFD
99C36181-E59A-11DA-9023-0002B3ECDCBE 1000BASESXHD
99C36182-E59A-11DA-9023-0002B3ECDCBE 1000BASESXFD
99C36183-E59A-11DA-9023-0002B3ECDCBE 1000BASETHD
99C36184-E59A-11DA-9023-0002B3ECDCBE 1000BASETFD
99C36185-E59A-11DA-9023-0002B3ECDCBE 10GigBASEFX

5 Access instance and device data
5.1 Process Channel objects provided by DTM
The minimum set of provided data should be:
• process values modeled as channel objects including the ranges and scaling.
5.2 DTM services to access instance and device data
The services InstanceItemList and DeviceItemList shall provide access to at least all
mandatory parameters of CP 3/4, CP 3/5 and CP 3/6 devices.
6 Protocol specific behavior
Not applicable.
7 Protocol specific usage of general data types
The following table (Table 3) shows how general data types, defined in IEC 62453-2 within
the namespace ‘fdt’, are used with CP 3/4, CP 3/5 and CP 3/6 devices.
Table 3 – Protocol specific usage of general data types
Attribute Description for use in IEC 61784 CP 3/4, CP 3/5 and CP 3/6
fdt:address For CP 3/4, CP 3/5 and CP 3/6 the address attribute is mandatory for the
exposed parameters in the DTMs. The address string shall be constructed
according to the rules of the FDT semanticId. That means the attribute
‘semanticId’ is always the same as the attribute ‘address’
fdt:protocolId See Clause 4
fdt:physicalLayer See Clause 4
fdt:deviceTypeId The attribute “fdt:DtmDeviceType/@deviceTypeId” must contain the DeviceID
according to the CP 3/4, CP 3/5 and CP 3/6 specification. The DeviceID shall
be entered in decimal format, however, the value should be displayed as hex
to the user.
GSDML XPath Expression:
“/ISO15745Profile/ProfileBody/DeviceIdentity/@DeviceID”
fdt:subDeviceType Enter manufacturer specific value here

---------------------- Page: 15 ----------------------

SIST EN 62453-303-2:2010
– 10 – 62453-303-2 © IEC:2009(E)
Attribute Description for use in IEC 61784 CP 3/4, CP 3/5 and CP 3/6
fdt:vendor The attribute fdt:DtmDeviceType/VersionInformation/@vendor shall contain
the VendorName according to CP 3/4, CP 3/5 and CP 3/6 specification.
GSDML XPath Expression:
“/ISO15745Profile/ProfileBody/DeviceIdentity/@VendorName”
fdt:manufacturerId The attribute fdt:DtmDeviceType/VersionInformation/@vendor shall contain
the VendorName according to the CP 3/4, CP 3/5 and CP 3/6 specification.
GSDML XPath Expression:
“/ISO15745Profile/ProfileBody/DeviceIdentity/@VendorName”
fdt:deviceTypeInformation Path to the GSDML file. The attribute contains the full path including the file
name.
For IEC 61784 CP 3/4, CP 3/5 and CP 3/6 devices, it is mandatory to provide
this attribute.
Only a parent developed according to IEC 61784 CP 3/4, CP 3/5 and CP 3/6
Annex can handle GSDML information. Thus, it is not necessary to fill this
attribute with the GSDML itself, if the parent is FDT 1.2 conformant.
The deviceTypeInformation attribute is of type string and shall be used with
format shown in the example:
Example: file://c:/myDtm/myGsdFile.xml
fdt:deviceTypeInformationPath Shall not be used.
The GSDML path information is already mandatory in the
deviceTypeInformation attribute
fdt:semanticId The SemanticIDs follow the different device models that are defined for
IEC 61784 CP 3/4, CP 3/5 and CP 3/6 devices. FDT currently supports
fdt:applicationDomain
following models:
• Profinet IO
• PROFIdrive
PROFINET IO
The applicationDomain is: FDT_PROFINET_IO
The semanticId follows the access information of a communication request:
The semanticId is: Api.Slot.Subslot.Index.ByteOffset.BitOffset.BitLength
Api – Api number
Slot – Slot number
Subslot – Subslot number
Index – Index number
ByteOffset – Start byte within the Index
BitOffset – Start bit within the Index (range 0-7)
BitLength –Length of values in bit
These values are numbers based on decimal format without leading ‘0’.
PROFIdrive
The applicationDomain is: FDT_PROFINET_PROFIDRIVE
According to the PROFIdrive profile, a device (drive unit) may be composed
by a number (1-many) of drive objects (DOs). The DOs may have different
types. Each DO is uniquely identifiable and manages its own parameters.
Each parameter can be uniquely identified by its number (PNU). Each DO
has its own number space.
A parameter may contain simple data or composed data (e.g. arrays).
The data of the device are accessible via a parameter channel (normally Api
0x3A00, Subslot 1, Index 0xB02E and a slot number which is the DO
number).
The semanticId is: DOdo-id.PNUpnu
do-id Drive Object ID
pnu ParameterNumber

---------------------- Page: 16 ----------------------

SIST EN 62453-303-2:2010
62453-303-2 © IEC:2009(E) – 11 –
Attribute Description for use in IEC 61784 CP 3/4, CP 3/5 and CP 3/6
do-id, pnu are based on decimal format without leading ‘0’

8 Protocol specific common data types
Not applicable.
9 Network management data types
9.1 General
The data types specified in this subclause are used in the following services:
• NetworkManagementInfoRead service;
• NetworkManagementInfoWrite service.
9.2 Parameter access data types
The data types describe the parameter information of an IEC 61784 CP 3/4, CP 3/5 and
CP 3/6 device (see Table 4 and Table 5)
Table 4 – Simple parameter access data types
Data type Definition Description
arType UINT ARType according to the PROFINET specification
Shall only be set by Parent
arProperties UDINT ARProperties according to th
...