SIST-TP CEN ISO/TR 20172:2021
(Main)Welding - Grouping systems for materials - European materials (ISO/TR 20172:2021)
Welding - Grouping systems for materials - European materials (ISO/TR 20172:2021)
This document establishes a European grouping system for materials for welding purposes, classified
in accordance with the grouping system of ISO/TR 15608.
It is also applicable for other purposes such as heat treatment, forming and non-destructive testing.
This document covers grouping systems for the following standardized materials:
a) steel;
b) aluminium and its alloys;
c) copper and its alloys;
d) cast irons;
e) nickel and nickel alloys.
For materials that are not assigned to a group in this document, the criteria of ISO/TR 15608 apply.
Schweißen - Werkstoffgruppeneinteilung - Europäische Werkstoffe (ISO/TR 20172:2021)
Dieses Dokument legt eine europäische Gruppeneinteilung von Werkstoffen zum Schweißen, gegliedert nach der Gruppeneinteilung von ISO/TR 15608, fest.
Es kann auch für andere Zwecke wie Wärmebehandlung, Umformen, zerstörungsfreie Prüfung angewendet werden.
Dieses Dokument enthält eine Gruppeneinteilung für die nachstehend genannten genormten Werkstoffe:
a) Stahl;
b) Aluminium und seine Legierungen;
c) Kupfer und seine Legierungen;
d) Gusseisen;
e) Nickel und Nickellegierungen.
Für Werkstoffe, die in diesem Dokument keiner Gruppe zugeordnet sind, gelten die Kriterien von ISO/TR 15608.
Soudage - Systèmes de groupement des matériaux - Matériaux européens (ISO/TR 20172:2021)
Le présent document fournit un système de groupement européen des matériaux destinés au soudage, classé conformément au système de groupement de l'ISO/TR 15608.
Il est également applicable pour d'autres fins telles que le traitement thermique, le formage et les contrôles non destructifs.
Le présent document couvre les systèmes de groupement des matériaux normalisés suivants:
a) aciers;
b) aluminium et alliages d'aluminium;
c) cuivre et alliages de cuivre;
d) fontes;
e) nickel et alliages de nickel.
Pour les matériaux n'appartenant pas à un groupe selon le présent document, les critères de l'ISO/TR 15608 s'appliquent.
Varjenje - Razvrščanje materialov v skupine - Evropski materiali (ISO/TR 20172:2021)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TP CEN ISO/TR 20172:2021
01-julij-2021
Nadomešča:
SIST-TP CEN ISO/TR 20172:2013
Varjenje - Razvrščanje materialov v skupine - Evropski materiali (ISO/TR
20172:2021)
Welding - Grouping systems for materials - European materials (ISO/TR 20172:2021)
Schweißen - Werkstoffgruppeneinteilung - Europäische Werkstoffe (ISO/TR 20172:2021)
Soudage - Systèmes de groupement des matériaux - Matériaux européens (ISO/TR
20172:2021)
Ta slovenski standard je istoveten z: CEN ISO/TR 20172:2021
ICS:
25.160.20 Potrošni material pri varjenju Welding consumables
SIST-TP CEN ISO/TR 20172:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TP CEN ISO/TR 20172:2021
---------------------- Page: 2 ----------------------
SIST-TP CEN ISO/TR 20172:2021
CEN ISO/TR 20172
TECHNICAL REPORT
RAPPORT TECHNIQUE
May 2021
TECHNISCHER BERICHT
ICS 25.160.20 Supersedes CEN ISO/TR 20172:2009
English Version
Welding - Grouping systems for materials - European
materials (ISO/TR 20172:2021)
Soudage - Systèmes de groupement des matériaux - Schweißen - Werkstoffgruppeneinteilung -
Matériaux européens (ISO/TR 20172:2021) Europäische Werkstoffe (ISO/TR 20172:2021)
This Technical Report was approved by CEN on 20 March 2021. It has been drawn up by the Technical Committee CEN/TC 121.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TR 20172:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TP CEN ISO/TR 20172:2021
CEN ISO/TR 20172:2021 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST-TP CEN ISO/TR 20172:2021
CEN ISO/TR 20172:2021 (E)
European foreword
This document (CEN ISO/TR 20172:2021) has been prepared by Technical Committee ISO/TC 44
"Welding and allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding and
allied processes” the secretariat of which is held by DIN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes CEN ISO/TR 20172:2009.
Endorsement notice
The text of ISO/TR 20172:2021 has been approved by CEN as CEN ISO/TR 20172:2021 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST-TP CEN ISO/TR 20172:2021
---------------------- Page: 6 ----------------------
SIST-TP CEN ISO/TR 20172:2021
TECHNICAL ISO/TR
REPORT 20172
Third edition
2021-04
Welding — Grouping systems for
materials — European materials
Soudage — Systèmes de groupement des matériaux — Matériaux
européens
Reference number
ISO/TR 20172:2021(E)
©
ISO 2021
---------------------- Page: 7 ----------------------
SIST-TP CEN ISO/TR 20172:2021
ISO/TR 20172:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved
---------------------- Page: 8 ----------------------
SIST-TP CEN ISO/TR 20172:2021
ISO/TR 20172:2021(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 International grouping system for European materials . 1
4.1 Types of steel in accordance with the grouping system of ISO/TR 15608:2017, Table 1 . 1
4.2 Types of aluminium and aluminium alloy in accordance with the grouping system
of ISO/TR 15608:2017, Table 2 .22
4.3 Types of copper and copper alloy in accordance with the grouping system of ISO/
TR 15608:2017, Table 3 .24
4.4 Types of cast iron in accordance with the grouping system of ISO/TR 15608:2017,
Table 7 .25
4.5 Types of nickel and nickel alloy in accordance with the grouping system of ISO/
TR 15608:2017, Table 4 .27
Bibliography .29
© ISO 2021 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST-TP CEN ISO/TR 20172:2021
ISO/TR 20172:2021(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 44, Welding and allied processes,
Subcommittee SC 10, Quality management in the field of welding, in collaboration with the European
Committee for Standardization (CEN) Technical Committee CEN/TC 121, Welding and allied processes,
in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
This third edition cancels and replaces the second edition (ISO 20172:2009), which has been technically
revised.
The main changes compared to the previous edition are as follows:
— Tables 1 to 5 have been revised;
— new Table 6 has been added for nickel and nickel alloys.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
iv © ISO 2021 – All rights reserved
---------------------- Page: 10 ----------------------
SIST-TP CEN ISO/TR 20172:2021
ISO/TR 20172:2021(E)
Introduction
This document reflects the situation at the time of publication.
Lists of former designations can be found in the relevant European materials standards.
For the materials not listed in this document, ISO/TR 20173:2018 and ISO/TR 20174:2020 are applicable.
© ISO 2021 – All rights reserved v
---------------------- Page: 11 ----------------------
SIST-TP CEN ISO/TR 20172:2021
---------------------- Page: 12 ----------------------
SIST-TP CEN ISO/TR 20172:2021
TECHNICAL REPORT ISO/TR 20172:2021(E)
Welding — Grouping systems for materials — European
materials
1 Scope
This document establishes a European grouping system for materials for welding purposes, classified
in accordance with the grouping system of ISO/TR 15608.
It is also applicable for other purposes such as heat treatment, forming and non-destructive testing.
This document covers grouping systems for the following standardized materials:
a) steel;
b) aluminium and its alloys;
c) copper and its alloys;
d) cast irons;
e) nickel and nickel alloys.
For materials that are not assigned to a group in this document, the criteria of ISO/TR 15608 apply.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at http:// www .electropedia .org/
4 International grouping system for European materials
4.1 Types of steel in accordance with the grouping system of ISO/TR 15608:2017, Table 1
See Table 1.
Materials grouped according to this document based on chemical composition and mechanical
properties but with specific delivering conditions outside ISO/TR 15608:2017 are qualified separately.
© ISO 2021 – All rights reserved 1
---------------------- Page: 13 ----------------------
SIST-TP CEN ISO/TR 20172:2021
ISO/TR 20172:2021(E)
Table 1 — Steel materials, classification according to the grouping of material
Designation
Group Standard(s)
Name Number
10CrMo5-5 1.7338 5.1 EN 10216-2
10CrMo9-10 1.7380 5.2 EN 10028-2, EN 10216-2, EN 10273
EN 10028-2, EN 10216-2,
11CrMo9-10 1.7383 5.2
EN 10222-2, EN 10273
11MnNi5-3 1.6212 9.1 EN 10028-4, EN 10216-4
EN 10028-4, EN 10216-4,
12Ni14 1.5637 9.2
EN 10222-3
12Ni19 1.5680 9.2 EN 10028-4
EN 10028-2, EN 10216-2,
13CrMo4-5 1.7335 5.1
EN 10222-2, EN 10273
EN 10028-4, EN 10216-4,
13MnNi6-3 1.6217 9.1
EN 10222-3
14MoV6-3 1.7715 6.1 EN 10216-2, EN 10222-2
15MnCrMoNiV5-3 1.6920 4.1 EN 10222-2
15MnMoV4-5 1.5402 1.2 EN 10222-2
15NiCuMoNb5-6-4 1.6368 4.2 EN 10216-2
15NiMn6 1.6228 9.1 EN 10028-4, EN 10222-3
EN 10222-2, EN 10216-2,
16Mo3 1.5415 1.2 EN 10217-2, EN 10217-5, EN 10273,
EN 10028-2
18MnMoNi5-5 1.6308 3.1 EN 10222-2
20CrMoV13-5-5 1.7779 6.3 EN 10216-2
20Mn5 1.1133 1.4 EN 10250-2
20MnB5 1.5353 3.2 EN ISO 683-2, EN ISO 683-3
20MnNb6 1.0471 1.2 EN 10216-2
20NiCrMo2-2 1.6523 3.1 EN 10297-1
20NiCrMoS2-2 1.6526 3.1 EN 10297-1
24CrMo13-6 1.8516 5.2 EN 10085
EN ISO 683-2, EN ISO 683-3,
25CrMo4 1.7218 5.1 EN 10132-2, EN 10216-2,
EN 10297-1
EN ISO 683-2, EN ISO 683-3,
25CrMoS4 1.7213 5.1
EN 10277
25Mn4 1.1177 1.3 EN 10132-2
26CrMo4-2 1.7219 5.1 EN 10216-4
27MnCrB5-2 1.7182 11.1 EN ISO 683-2, EN ISO 683-3
a
28Mn6 1.1170 1.4 EN 10083-2, EN 10250-2
a
30CrMo4 1.7216 5.1 EN 10297-1
30MnB5 1.5531 11.1 EN ISO 683-2, EN ISO 683-3
a
30NiCrMo16-6 1.6747 9.2 EN ISO 683-2, EN ISO 683-3
a
31CrMo12 1.8515 5.2 EN 10085
a
31CrMoV9 1.8519 6.2 EN 10085
a
32CrAlMo7-10 1.8505 5.1 EN 10085
a
The classification of materials is for informational purposes only, as the strength values or limits of chemical
composition specified in this document can be outside the limits of ISO/TR 15608. But these materials have not exactly the
same behaviour during welding as his sub-group material. Welding conditions should be specifically adapted.
2 © ISO 2021 – All rights reserved
---------------------- Page: 14 ----------------------
SIST-TP CEN ISO/TR 20172:2021
ISO/TR 20172:2021(E)
Table 1 (continued)
Designation
Group Standard(s)
Name Number
a
33CrMoV12-9 1.8522 6.2 EN 10085
EN ISO 683-2, EN ISO 683-3,
a
34Cr4 1.7033 5.1
EN 10250-3
a
34CrAlMo5-10 1.8507 5.1 EN 10085
a
34CrAlNi7-10 1.8550 5.1 EN 10085
EN ISO 683-2, EN ISO 683-3,
a
34CrMo4 1.7220 11.2
EN 10297-1
a
34CrMoS4 1.7226 11.2 EN ISO 683-2, EN ISO 683-3
a
34CrNiMo6 1.6582 5.2 EN 10277
a
34CrS4 1.7037 5.1 EN ISO 683-2, EN ISO 683-3
a
35NiCr6 1.5815 9.1 EN ISO 683-2, EN ISO 683-3
a
36NiCrMo16 1.6773 9.2 EN ISO 683-2, EN ISO 683-3
a
37Cr4 1.7034 5.1 EN ISO 683-2, EN ISO 683-3
a
37CrS4 1.7038 5.1 EN ISO 683-2, EN ISO 683-3
a
38Cr2 1.7003 5.1 EN ISO 683-2, EN ISO 683-3
a
38Mn6 1.1127 11.2 EN 10297-1
a
39MnCrB6-2 1.7189 5.1 EN ISO 683-2, EN ISO 683-3
a
39NiCrMo3 1.6510 9.2 EN ISO 683-2, EN ISO 683-3
a
40CrMoV13-9 1.8523 6.2 EN 10085
a
41Cr4 1.7035 11.2 EN ISO 683-2, EN ISO 683-3
a
41CrAlMo7-10 1.8509 5.1 EN 10085
a
41CrS4 1.7039 11.2 EN ISO 683-2, EN ISO 683-3
EN ISO 683-2, EN ISO 683-3,
a
42CrMo4 1.7225 5.1
EN 10132-2, EN 10297-1
EN ISO 683-2, EN ISO 683-3,
a
42CrMoS4 1.7227 5.1
EN 10277
a
46Cr2 1.7006 11.2 EN ISO 683-2, EN ISO 683-3
a
50CrMo4 1.7228 5.1 EN ISO 683-2, EN ISO 683-3
a
51CrV4 1.8159 6.1 EN ISO 683-2, EN ISO 683-3
8MoB5-4 1.5450 1.3 EN 10216-2
C10 1.0301 1.1 EN 10277
C10E 1.1121 1.1 EN 10132-2, EN 10297-1
C15 1.0401 1.1 EN 10277
C15E 1.1141 1.1 EN 10132-2, EN 10297-1
C15R 1.1114 1.1 EN 10297-1
C16 1.0407 1.1 EN 10277
C22 1.0402 1.1 EN 10250-2
EN 10132-2, EN 10083-2,
C22E 1.1151 1.1
EN 10297-1
C22R 1.1149 1.1 EN 10083-2
C25 1.0406 1.1 EN 10250-2
C25E 1.1158 1.1 EN 10250-2
a
The classification of materials is for informational purposes only, as the strength values or limits of chemical
composition specified in this document can be outside the limits of ISO/TR 15608. But these materials have not exactly the
same behaviour during welding as his sub-group material. Welding conditions should be specifically adapted.
© ISO 2021 – All rights reserved 3
---------------------- Page: 15 ----------------------
SIST-TP CEN ISO/TR 20172:2021
ISO/TR 20172:2021(E)
Table 1 (continued)
Designation
Group Standard(s)
Name Number
C30 1.0528 11.1 EN 10250-2
C30E 1.1178 11.1 EN 10132-2
C35 1.0501 11.1 EN 10083-2, EN 10250-2, EN 10277
EN 10083-2, EN 10250-2,
C35E 1.1181 11.1
EN 10297-1, EN 10132-2, EN 10277
C35R 1.1180 11.1 EN 10277
C35R 1.1180 11.2 EN 10083-2
C40 1.0511 11.2 EN 10083-2, EN 10250-2, EN 10277
C40E 1.1186 11.2 EN 10083-2, EN 10132-2, EN 10277
C40R 1.1189 11.2 EN 10083-2, EN 10277
a
C45 1.0503 11.2 EN 10083-2, EN 10250-2, EN 10277
EN 10083-2, EN 10250-2,
a
C45E 1.1191 11.2
EN 10297-1, EN 10132-2
a
C45R 1.1201 11.2 EN 10083-2, EN 10277
C50 1.0540 11.2 EN 10250-2, EN 10277
a
C50E 1.1206 11.3 EN 10277, EN 10083-2
C50R 1.1241 11.3 EN 10083-2, EN 10277
C55 1.0535 11.3 EN 10250-2, EN 10083-2
EN 10083-2, EN 10250-2,
C55E 1.1203 11.3
EN 10132-2
C55R 1.1209 11.3 EN 10083-2
C60 1.0601 11.3 EN 10083-2, EN 10277, EN 10250-2
EN 10083-2, EN 10132-2,
C60E 1.1221 11.3
EN 10250-2, EN 10297-1, EN 10277
C60R 1.1223 11.3 EN 10083-2, EN 10277
EN 10296-1, EN 10305-2,
E155 1.0033 1.1
EN 10305-3, EN 10305-6
E190 1.0031 1.1 EN 10296-1, EN 10305-3
EN 10296-1, EN 10305-3,
E195 1.0034 1.1
EN 10305-6, EN 10305-2
E215 1.0212 1.1 EN 10305-1, EN 10305-4
EN 10296-1, EN 10305-3,
E220 1.0215 1.1
EN 10305-5
EN 10296-1, EN 10297-1,
EN 10305-1, EN 10305-2,
E235 1.0308 1.1
EN 10305-3, EN 10305-4,
EN 10305-6
E260 1.0220 1.1 EN 10296-1, EN 10305-3
EN 10296-1, EN 10297-1,
E275 1.0225 1.1 EN 10305-2, EN 10305-3,
EN 10305-5, EN 10305-6
E275K2 1.0456 1.1 EN 10296-1, EN 10297-1
E275M 1.8895 1.1 EN 10296-1
E295GC 1.0533 1.2 EN 10277
a
The classification of materials is for informational purposes only, as the strength values or limits of chemical
composition specified in this document can be outside the limits of ISO/TR 15608. But these materials have not exactly the
same behaviour during welding as his sub-group material. Welding conditions should be specifically adapted.
4 © ISO 2021 – All rights reserved
---------------------- Page: 16 ----------------------
SIST-TP CEN ISO/TR 20172:2021
ISO/TR 20172:2021(E)
Table 1 (continued)
Designation
Group Standard(s)
Name Number
E315 1.0236 1.2 EN 10297-1
EN 10296-1, EN 10305-3,
E320 1.0237 1.2
EN 10305-5
E335GC 1.0543 1.2 EN 10277
EN 10296-1, EN 10305-2,
EN 10305-3, EN 10305-4,
a
E355 1.0580 1.2
EN 10305-6, EN 10305-1,
EN 10297-1
E355K2 1.0599 1.2 EN 10297-1
E355K2 1.0920 1.2 EN 10296-1
E355M 1.8896 1.2 EN 10296-1
EN 10296-1, EN 10305-3,
E370 1.0261 1.3
EN 10305-5
E420 1.0575 1.3 EN 10305-3, EN 10305-5
E420J2 1.0920 1.3 EN 10297-1
E420M 1.8897 2.1 EN 10296-1
E460K2 1.8891 1.3 EN 10296-1, EN 10297-1
E460M 1.8898 2.1 EN 10296-1
E470 1.0536 1.3 EN 10297-1
E590K2 1.0644 1.3 EN 10297-1
E730K2 1.8893 1.3 EN 10297-1
G12MoCrV5-2 1.7720 6.1 EN 10213
G17CrMo5-5 1.7357 5.1 EN 10213
G17CrMo9-10 1.7379 5.2 EN 10213
G17CrMoV5-10 1.7706 6.2 EN 10213
G17Mn5 1.1131 1.1 EN 10213
G17NiCrMo13-6 1.6781 9.2 EN 10213
G18Mo5 1.5422 1.2 EN 10213
G20Mn5 1.6220 1.2 EN 10213
G20Mo5 1.5419 1.2 EN 10213
G9Ni10 1.5636 9.1 EN 10213
G9Ni14 1.5638 9.2 EN 10213
GP240GH 1.0619 1.1 EN 10213
GP240GR 1.0621 1.1 EN 10213
GP280GH 1.0625 1.2 EN 10213
GX15CrMo5 1.7365 5.3 EN 10213
GX23CrMoV12-1 1.4931 6.4 EN 10213
GX2CrNi19-11 1.4309 8.1 EN 10213
GX2CrNiMo19-11-2 1.4409 8.1 EN 10213
GX2CrNiMoCuN25-6-3-3 1.4517 10.2 EN 10213
GX2CrNiMoN22-5-3 1.4470 10.1 EN 10213
GX2CrNiMoN26-7-4 1.4469 10.2 EN 10213
a
The classification of materials is for informational purposes only, as the strength values or limits of chemical
composition specified in this document can be outside the limits of ISO/TR 15608. But these materials have not exactly the
same behaviour during welding as his sub-group material. Welding conditions should be specifically adapted.
© ISO 2021 – All rights reserved 5
---------------------- Page: 17 ----------------------
SIST-TP CEN ISO/TR 20172:2021
ISO/TR 20172:2021(E)
Table 1 (continued)
Designation
Group Standard(s)
Name Number
GX2NiCrMo28-20-2 1.4458 8.2 EN 10213
GX3CrNi13-4 1.6982 7.2 EN 10213
GX4CrNi13-4 1.4317 7.2 EN 10213
GX4CrNiMo16-5-1 1.4405 7.2 EN 10132-2
GX5CrNi19-10 1.4308 8.1 EN 10213
GX5CrNiMo19-11-2 1.4408 8.1 EN 10213
GX5CrNiMoNb19-11-2 1.4581 8.1 EN 10213
GX5CrNiNb19-11 1.4552 8.1 EN 10213
GX8CrNi12 1.4107 7.2 EN 10213
HC180B 1.0395 1.1 EN 10268
HC180P 1.0342 1.1 EN 10268
HC180Y 1.0922 1.1 EN 10268
HC220B 1.0396 1.1 EN 10268
HC220I 1.0346 1.1 EN 10268
HC220P 1.0397 1.1 EN 10268
HC220Y 1.0925 1.1 EN 10268
HC260B 1.0400 1.1 EN 10268
HC260I 1.0349 1.1 EN 10268
HC260LA 1.0480 1.1 EN 10268
HC260P 1.0417 1.1 EN 10268
HC260Y 1.0928 1.1 EN 10268
HC300B 1.0444 1.2 EN 10268
HC300I 1.0447 1.2 EN 10268
HC300LA 1.0489 1.2 EN 10268
HC300P 1.0448 1.2 EN 10268
HC340LA 1.0548 1.2 EN 10268
HC380LA 1.0550 1.3 EN 10268
HC420LA 1.0556 1.3 EN 10268
L210GA 1.0319 1.1 EN ISO 3183
L235 1.0252 1.1 EN 10224
L235GA 1.0458 1.1 EN ISO 3183
L245GA 1.0459 1.1 EN ISO 3183
L245MB 1.0418 1.1 EN ISO 3183
L245NB 1.0457 1.1 EN ISO 3183
L275 1.0260 1.1 EN 10224
L290GA 1.0483 1.2 EN ISO 3183
L290MB 1.0429 1.2 EN ISO 3183
L290NB 1.0484 1.2 EN ISO 3183
L355 1.0419 1.2 EN 10224
L360GA 1.0499 1.2 EN ISO 3183
a
The classification of materials is for informational purposes only, as the strength values or limits of chemical
composition specified in this document can be outside the limits of ISO/TR 15608. But these materials have not exactly the
same behaviour during welding as his sub-group material. Welding conditions should be specifically adapted.
6 © ISO 2021 – All rights reserved
---------------------- Page: 18 ----------------------
SIST-TP CEN ISO/TR 20172:2021
ISO/TR 20172:2021(E)
Table 1 (continued)
Designation
Group Standard(s)
Name Number
L360MB 1.0578 1.2 EN ISO 3183
L360NB 1.0582 1.2 EN ISO 3183
L360QB 1.8948 1.2 EN ISO 3183
L415MB 1.8973 2.1 EN ISO 3183
L415NB 1.8972 1.3 EN ISO 3183
L415QB 1.8947 3.1 EN ISO 3183
L450MB 1.8975 2.1 EN ISO 3183
L450QB 1.8952 3.1 EN ISO 3183
L485MB 1.8977 2.2 EN ISO 3183
L485QB 1.8955 3.1 EN ISO 3183
L550QB 1.8957 3.1 EN ISO 3183
L555MB 1.8978 2.2 EN ISO 3183
P195GH 1.0348 1.1 EN 10216-2, EN 10217-2
P195TR1 1.0107 1.1 EN 10216-1, EN 10217-1
P195TR2 1.0108 1.1 EN 10216-1, EN 10217-1
EN 10216-4, EN 10217-4,
P215NL 1.0451 1.1
EN 10217-6
EN 10216-2, EN 10217-2,
P235GH 1.0345 1.1 EN 10217-5, EN 10273,
EN 10028-2
P235S 1.0112 1.1 EN 10207
P235TR1 1.0254 1.1 EN 10216-1, EN 10217-1
P235TR2 1.0255 1.1 EN 10216-1, EN 10217-1
P245GH 1.0352 1.1 EN 10222-2
P245NB 1.0111 1.1 EN 10120
P250GH 1.0460 1.1 EN 10273
P255QL 1.0452 1.1 EN 10216-4
EN 10216-2, EN 10217-2,
P265GH 1.0425 1.1 EN 10217-5, EN 10273,
EN 10028-2
P265NB 1.0423 1.1 EN 10120, EN 10149-3
EN 10216-4, EN 10217-4,
P265NL 1.0453 1.1
EN 10217-6
P265S 1.0130 1.1 EN 10207
P265TR1 1.0258 1.1 EN 10216-1, EN 10217-1
P265TR2 1.0259 1.1 EN 10216-1, EN 10217-1
P275N 1.0486 1.1 EN 10028-3
P275NH 1.0487 1.1 EN 10273, EN 10028-3
EN 10216-3, EN 10217-3,
P275NL1 1.0488 1.1
EN 10028-3
EN 10216-3, EN 10217-3,
P275NL2 1.1104 1.1
EN 10028-3
P275S 1.1100 1.1 EN 10207
a
The classification of materials is for informational purposes only, as the strength values or limits of chemical
composition specified in this document can be outside the limits of ISO/TR 15608. But these materials have not exactly the
same behaviour during welding as his sub-group material. Welding conditions should be specifically adapted.
© ISO 2021 – All rights reserved 7
---------------------- Page: 19 ----------------------
SIST-TP CEN ISO/TR 20172:2021
ISO/TR 20172:2021(E)
Table 1 (continued)
Designation
Group Standard(s)
Name Number
P280GH 1.0426 1.2 EN 10222-2
P285NH 1.0477 1.2 EN 10222-4
P285QH 1.0478 1.2 EN 10222-4
P295GH 1.0481 1.2 EN 10273, EN 10028-2
P305GH 1.0436 1.2 EN 10222-2
P310NB 1.0437 1.2 EN 10120
P355GH 1.0473 1.2 EN 10273, EN 10028-2
P355M 1.8821 1.2 EN 10028-5
P355ML1 1.8832 1.2 EN 10028-5
P355ML2 1.8833 1.2 EN 10028-5
EN 10216-3, EN 10217-3,
P355N 1.0562 1.2
EN 10028-3
P355NB 1.0557 1.2 EN 10120
EN 10216-3, EN 10217-3, EN 10273,
P355NH 1.0565 1.2
EN 10028-3, EN 10222-4
EN 10216-3, EN 10217-3,
P355NL1 1.0566 1.2
EN 10028-3
EN 10216-3, EN 10217-3,
P355NL2 1.1106 1.2
EN 10028-3
P355Q 1.8866 1.2 EN 10028-6
P355QH 1.8867 1.2 EN 10273, EN 10028-6
P355QH1 1.0571 1.2 EN 10222-4
P355QL1 1.8868 1.2 EN 10028-6
P355QL2 1.8869 1.2 EN 10028-6
P420M 1.8824 2.1 EN 10028-5
P420ML1 1.8835 2.1 EN 10028-5
P420ML2 1.8828 2.1 EN 10028-5
P420NH 1.8932 1.3 EN 10222-4
P420QH 1.8936 3.1 EN 10222-4
P460M 1.8826 2.1 EN 10028-5
P460ML1 1.8837 2.1 EN 10028-5
P460ML2 1.8831 2.1 EN 10028-5
EN 10216-3, EN 10217-3,
P460N 1.8905 1.3
EN 10028-3
P460NH 1.8935 1.3 EN 10273, EN 10216-3, EN 10217-3
P460NH 1.8935 1.3 EN 10028-3
EN 10216-3, EN 10217-3,
P460NL1 1.8915 1.3
EN 10028-3
EN 10216-3, EN 10217-3,
P460NL2 1.8918 1.3
EN 10028-3
P460Q 1.8870 3.1 EN 10028-6
P460QH 1.8871 3.1 EN 10273, EN 10028-6
a
The classification of materials is for informational purposes only, as the strength values or limits of chemical
composition specified in this document can be outside the limits of ISO/TR 15608. But these materials have not exactly the
same behaviour during welding as his sub-group material. Welding conditions should be specifically adapted.
8 © ISO 2021 – All rights reserved
---------------------- Page: 20 ----------------------
SIST-TP CEN ISO/TR 20172:2021
ISO/TR 20172:2021(E)
Table 1 (continued)
Designation
Group Standard(s)
Name Number
P460QL1 1.8872 3.1 EN 10028-6
P460QL2 1.8864 3.1 EN 10028-6
P500Q 1.8873 3.1 EN 10028-6
P500QH 1.8874 3.1 EN 10028-6
P500QL1 1.8875 3.1 EN 10028-6
P500QL2 1.8865 3.1 EN 10028-6
P620Q 1.8876 3.1 EN 10216-3
P620QH 1.8877 3.1 EN 10216-2
P620QL 1.8890 3.1 EN 10216-2
P690Q 1.8879 3.1 EN 10216-2, EN 10028-6
P690QH 1.8880 3.1 EN 10216-2, EN 10028-6
P690QL1 1.8881 3.1 EN 10216-2, EN 10028-6
P690QL2 1.8888 3.1 EN 10216-2, EN 10028-6
R200 1.0521 11.3 EN 13674-1
R220 1.0524 11.3 EN 13674-1
R260 1.0623 11.3 EN 13674-1
R260Mn 1.0624 11.3 EN 13674-1
R320Cr 1.0915 11.3 EN 13674-1
R350LHT 1.0632 11.3 EN 13674-1
R50HT 1.0631 11.3 EN 13674-1
S195T 1.0026 1.1 EN 10255
S235J0 1.0114 1.1 EN 10025-2
S235J0W 1.8958 1.4 EN 10025-5
S235J2G3 1.0116 1.1 EN 10250-2, EN 10025-2
S235J2G3C 1.0118 1.1 EN 10025-2
S235J2G4 1.0117 1.1 EN 10025-2
S235J2G4C 1.0119 1.1 EN 10025-2
S235JR 1.0037 1.1 EN 10025-2
S235JRG1 1.0036 1.1 EN 10025-2
S235JRG2 1.0038 1.1 EN 10025-2, EN 10250-2
S235JRG2 1.0122 1.1 EN 10277
S235JRH 1.0039 1.1 EN 10210-1, EN 10219-1
S240GP 1.0021 1.1 EN 10248-1
S260NC 1.0971 1.1 EN 10149-3
S270GP 1.0023 1.1 EN 10248-1
S275J0 1.0143 1.1 EN 10025-2
S275J0H 1.0149 1.1 EN 10210-1, EN 10219-1
S275J2G3 1.0144 1.1 EN 10025-2
S275J2G3C 1.0141 1.1 EN 10025-2
S275J2G4 1.0145 1.1 EN 10025-2
a
The classification of materials is for informational purposes only, as the strength values or limits of chemical
composition specified in this document can be outside the limits of ISO/TR 15608. But these materials have not exactly the
same behaviour during welding as his sub-group material. Welding conditions should be specifically adapted.
© ISO 2021 – All rights reserved 9
---------------------- Page: 21 ----------------------
SIST-TP CEN ISO/TR 20172:2021
ISO/TR 20172:2021(E)
Table 1 (continued)
Designation
Group Standard(s)
Name Number
S275J2G4C 1.0142 1.1 EN 10025-2
S275J2H 1.0138 1.1 EN 10210-1, EN 10219-1
S275J2W 1.8961 1.4 EN 10025-5
S275JR 1.0044 1.1 EN 10025-2
S275M 1.8818 1.1 EN 10025-4
S275MH 1.8843 1.1 EN 10219-1
S275ML 1.8819 1.1 EN 10025-4
S275MLH 1.8844 1.1 EN 10219-1
S275N 1.0490 1.1 EN 10025-3
S275NH 1.0493 1.1 EN 10210-1, EN 10219-1
S275NL 1.0491 1.1 EN 10025-3
S275NLH 1.0497 1.1 EN 10210-1, EN 10219-1
S315MC 1.0972 1.2 EN 10149-2
S315NC 1.0973 1.2 EN 10149-3
S320GP 1.0046 1.2 EN 10248-1
S355 G4+M 1.8803+M 1.2 EN 10225
S355G1 1.8814 1.2 EN 10225
S355G1+N 1.8814+N 1.2 EN 10225
S355G10+M 1.8813+M 1.2 EN 10225
S355G10+N 1.8813+N 1.2 EN 10225
S355G11 1.8806 1.2 EN 10225
S355G11+M 1.8806+M 1.2 EN 10225
S355G11+N 1.8806+N 1.2 EN 10225
S355G12 1.8809 1.2 EN 10225
S355G12+M 1.8809+M 1.2 EN 10225
S355G12+N 1.8809+N 1.2 EN 10225
S355G13+N 1.1182+N 1.2 EN 10225
S355G13+Q 1.1182+Q 1.2 EN 10225
S355G14+N 1.1184+N 1.2 EN 10225
S355G14+Q 1.1184+Q 1.2 EN 10225
S355G15+N 1.1190+N 1.2 EN 10225
S355G15+Q 1.1190+Q 1.2 EN 10225
S355G15+Q 1.8852+Q 1.2 EN 10225
S355G1N 1.8814+N 1.2 EN 10225
S355G2+N 1.8801+N 1.2 EN 10225
S355G3+N 1.8802+N 1.2 EN 10225
S355G4 1.8803 1.2 EN 10225
S355G4+M 1.8803+M 1.2 EN 10225
S355G5+M 1.8804+M 1.2 EN 10225
S355G6+M 1.8805+M 1.2 EN 10225
a
The classification of materials is for informational purposes only, as the strength values or limits of chemical
composition specified in this document can be outside the limits of ISO/TR 15608. But these materials have not exactly the
same behaviour during welding as his sub-group material. Welding conditions should be specifically adapted.
10 © ISO 2021 – All rights reserved
---------------------- Page: 22 ----------------------
SIST-TP CEN ISO/TR 20172:2021
ISO/TR 20172:2021(E)
Table 1 (continued)
Designation
Group Standard(s)
Name Number
S355G7+M 1.8808+M 1.2 EN 10225
S355G7+N 1.8808+N 1.2 EN 10225
S355G8+M 1.8810+M 1.2 EN 10225
S355G8+N 1.8810+N 1.2 EN 10225
S355G9+M 1.8811+M 1.2 EN 10225
S355G9+N 1.8811+N 1.2 EN 10225
S355GP 1.0083 1.2 EN 10248-1
S355J0 1.0553 1.2 EN 10025-2
S355J0C 1.0554 1.2 EN 10025-2
S355J0H 1.0547 1.2 EN 10210-1, EN 10219-1
S355J0W 1.8959 1.4 EN 10025-5
S355J0WP 1.8945 1.4 EN 10025-5
...
SLOVENSKI STANDARD
kSIST-TP FprCEN ISO/TR 20172:2021
01-januar-2021
Varjenje - Razvrščanje materialov v skupine - Evropski materiali (ISO/PRF TR
20172:2020)
Welding - Grouping systems for materials - European materials (ISO/PRF TR
20172:2020)
Schweißen - Werkstoffgruppeneinteilung - Europäische Werkstoffe (ISO/PRF TR
20172:2020)
Soudage - Systèmes de groupement des matériaux - Matériaux européens (ISO/PRF TR
20172:2020)
Ta slovenski standard je istoveten z: FprCEN ISO/TR 20172
ICS:
25.160.20 Potrošni material pri varjenju Welding consumables
kSIST-TP FprCEN ISO/TR 20172:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
kSIST-TP FprCEN ISO/TR 20172:2021
---------------------- Page: 2 ----------------------
kSIST-TP FprCEN ISO/TR 20172:2021
TECHNICAL ISO/TR
REPORT 20172
Third edition
Welding — Grouping systems for
materials — European materials
Soudage — Systèmes de groupement des matériaux — Matériaux
européens
PROOF/ÉPREUVE
Reference number
ISO/TR 20172:2020(E)
©
ISO 2020
---------------------- Page: 3 ----------------------
kSIST-TP FprCEN ISO/TR 20172:2021
ISO/TR 20172:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii PROOF/ÉPREUVE © ISO 2020 – All rights reserved
---------------------- Page: 4 ----------------------
kSIST-TP FprCEN ISO/TR 20172:2021
ISO/TR 20172:2020(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 International grouping system for European materials . 1
4.1 Types of steel in accordance with the grouping system of ISO/TR 15608:2017, Table 1 . 1
4.2 Types of aluminium and aluminium alloy in accordance with the grouping system
of ISO/TR 15608:2017, Table 2 .21
4.3 Types of copper and copper alloy in accordance with the grouping system of ISO/
TR 15608:2017, Table 3 .23
4.4 Types of cast iron in accordance with the grouping system of ISO/TR 15608:2017,
Table 7 .25
4.5 Types of cast iron in accordance with the grouping system of ISO/TR 15608:2017,
Table 7 .26
4.6 Types of nickel and nickel alloy in accordance with the grouping system of ISO/
TR 15608:2017, Table 4 .28
Bibliography .31
© ISO 2020 – All rights reserved PROOF/ÉPREUVE iii
---------------------- Page: 5 ----------------------
kSIST-TP FprCEN ISO/TR 20172:2021
ISO/TR 20172:2020(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 44, Welding and allied processes,
Subcommittee SC 10, Quality management in the field of welding, in collaboration with the European
Committee for Standardization (CEN) Technical Committee CEN/TC 121, Welding, in accordance with
the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
This third edition cancels and replaces the second edition (ISO 20172:2009), which has been technically
revised.
The main changes compared to the previous edition are as follows:
— Tables 1 to 5 have been revised;
— new Table 6 has been added for nickel and nickel alloys.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
iv PROOF/ÉPREUVE © ISO 2020 – All rights reserved
---------------------- Page: 6 ----------------------
kSIST-TP FprCEN ISO/TR 20172:2021
ISO/TR 20172:2020(E)
Introduction
This document reflects the situation at the time of publication.
Lists of former designations can be found in the relevant European materials standards.
For the materials not listed in this document, ISO/TR 20173:2018 and ISO/TR 20174:2020 are applicable.
© ISO 2020 – All rights reserved PROOF/ÉPREUVE v
---------------------- Page: 7 ----------------------
kSIST-TP FprCEN ISO/TR 20172:2021
---------------------- Page: 8 ----------------------
kSIST-TP FprCEN ISO/TR 20172:2021
TECHNICAL REPORT ISO/TR 20172:2020(E)
Welding — Grouping systems for materials — European
materials
1 Scope
This document establishes a European grouping system for materials for welding purposes, classified
in accordance with the grouping system of ISO/TR 15608.
It is also applicable for other purposes such as heat treatment, forming and non-destructive testing.
This document covers grouping systems for the following standardized materials:
a) steel;
b) aluminium and its alloys;
c) copper and its alloys;
d) cast irons;
e) nickel and nickel alloys.
In case of dispute, for example where variations in properties such as thickness and yield strength
occur, ISO/TR 15608 applies.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at http:// www .electropedia .org/
4 International grouping system for European materials
4.1 Types of steel in accordance with the grouping system of ISO/TR 15608:2017, Table 1
See Table 1.
Materials grouped according to this document based on chemical composition and mechanical
properties but with specific delivering conditions outside ISO/TR 15608:2017 are qualified separately.
© ISO 2020 – All rights reserved PROOF/ÉPREUVE 1
---------------------- Page: 9 ----------------------
kSIST-TP FprCEN ISO/TR 20172:2021
ISO/TR 20172:2020(E)
Table 1 — Steel materials, classification according to the grouping of material
Designation
Group Standard(s)
Name Number
10CrMo5-5 1.7338 5.1 EN 10216-2
10CrMo9-10 1.7380 5.2 EN 10028-2, EN 10216-2, EN 10273
EN 10028-2, EN 10216-2,
11CrMo9-10 1.7383 5.2
EN 10222-2, EN 10273
11MnNi5-3 1.6212 9.1 EN 10028-4, EN 10216-4
EN 10028-4, EN 10216-4,
12Ni14 1.5637 9.2
EN 10222-3
12Ni19 1.5680 9.2 EN 10028-4
EN 10028-2, EN 10216-2,
13CrMo4-5 1.7335 5.1
EN 10222-2, EN 10273
EN 10028-4, EN 10216-4,
13MnNi6-3 1.6217 9.1
EN 10222-3
14MoV6-3 1.7715 6.1 EN 10216-2, EN 10222-2
15MnCrMoNiV5-3 1.6920 4.1 EN 10222-2
15MnMoV4-5 1.5402 1.2 EN 10222-2
15NiCuMoNb5-6-4 1.6368 3.1 EN 10216-2
15NiMn6 1.6228 9.1 EN 10028-4, EN 10222-3
EN 10222-2, EN 10216-2,
16Mo3 1.5415 1.2 EN 10217-2, EN 10217-5, EN 10273,
EN 10028-2
18MnMoNi5-5 1.6308 3.1 EN 10222-2
20CrMoV13-5-5 1.7779 6.3 EN 10216-2
20Mn5 1.1133 1.4 EN 10250-2
20MnB5 1.5353 3.2 EN ISO 683-2, EN ISO 683-3
20MnNb6 1.0471 1.2 EN 10216-2
20NiCrMo2-2 1.6523 3.1 EN 10297-1
20NiCrMoS2-2 1.6526 3.1 EN 10297-1
24CrMo13-6 1.8516 5.2 EN 10085
EN ISO 683-2, EN ISO 683-3, EN
25CrMo4 1.7218 5.1
10132-2, EN 10216-2, EN 10297-1
EN ISO 683-2, EN ISO 683-3, EN
25CrMoS4 1.7213 5.1
10277
25Mn4 1.1177 1.3 EN 10132-2
26CrMo4-2 1.7219 5.1 EN 10216-4
27MnCrB5-2 1.7182 11.1 EN ISO 683-2, EN ISO 683-3
a
28Mn6 1.1170 1.4 EN 10083-2, EN 10250-2
a
30CrMo4 1.7216 5.1 EN 10297-1
30MnB5 1.5531 11.1 EN ISO 683-2, EN ISO 683-3
a
30NiCrMo16-6 1.6747 9.2 EN ISO 683-2, EN ISO 683-3
a
31CrMo12 1.8515 5.2 EN 10085
a
31CrMoV9 1.8519 6.2 EN 10085
a
32CrAlMo7-10 1.8505 5.1 EN 10085
a
33CrMoV12-9 1.8522 6.2 EN 10085
a
The classification of materials is for informational purposes only, as the strength values or limits of chemical
composition specified in this document cane be outside the limits of ISO/TR 15608. But these materials have not exactly
the same behaviour during welding as his sub-group material. Welding conditions should be specifically adapted.
2 PROOF/ÉPREUVE © ISO 2020 – All rights reserved
---------------------- Page: 10 ----------------------
kSIST-TP FprCEN ISO/TR 20172:2021
ISO/TR 20172:2020(E)
Table 1 (continued)
Designation
Group Standard(s)
Name Number
a
34Cr4 1.7033 5.1 EN ISO 683-2, EN ISO 683-3
a
34CrAlMo5-10 1.8507 5.1 EN 10085
a
34CrAlNi7-10 1.8550 5.1 EN 10085
EN ISO 683-2, EN ISO 683-3,
a
34CrMo4 1.7220 11.2
EN 10297-1
a
34CrMoS4 1.7226 11.2 EN ISO 683-2, EN ISO 683-3
a
34CrNiMo6 1.6582 5.2 EN 10277
a
34CrS4 1.7037 5.1 EN ISO 683-2, EN ISO 683-3
a
35NiCr6 1.5815 9.1 EN ISO 683-2, EN ISO 683-3
a
36NiCrMo16 1.6773 9.2 EN ISO 683-2, EN ISO 683-3
a
37Cr4 1.7034 5.1 EN ISO 683-2, EN ISO 683-3
a
37CrS4 1.7038 5.1 EN ISO 683-2, EN ISO 683-3
a
38Cr2 1.7003 5.1 EN ISO 683-2, EN ISO 683-3
a
38Mn6 1.1127 11.2 EN 10297-1
a
39MnCrB6-2 1.7189 5.1 EN ISO 683-2, EN ISO 683-3
a
39NiCrMo3 1.6510 9.2 EN ISO 683-2, EN ISO 683-3
a
40CrMoV13-9 1.8523 6.2 EN 10085
a
41Cr4 1.7035 11.2 EN ISO 683-2, EN ISO 683-3
a
41CrAlMo7-10 1.8509 5.1 EN 10085
a
41CrS4 1.7039 11.2 EN ISO 683-2, EN ISO 683-3
EN ISO 683-2, EN ISO 683-3, EN
a
42CrMo4 1.7225 5.1
10132-2, EN 10297-1
EN ISO 683-2, EN ISO 683-3, EN
a
42CrMoS4 1.7227 5.1
10277
a
46Cr2 1.7006 11.2 EN ISO 683-2, EN ISO 683-3
a
50CrMo4 1.7228 5.1 EN ISO 683-2, EN ISO 683-3
a
51CrV4 1.8159 6.1 EN ISO 683-2, EN ISO 683-3
8MoB5-4 1.5450 1.3 EN 10216-2
C10 1.0301 1.1 EN 10277
C10E 1.1121 1.1 EN 10132-2, EN 10297-1
C15 1.0401 1.1 EN 10277
C15E 1.1141 1.1 EN 10132-2, EN 10297-1
C15R 1.1114 1.1 EN 10297-1
C16 1.0407 1.1 EN 10277
C22 1.0402 1.1 EN 10250-2
EN 10132-2, EN 10083-2,
C22E 1.1151 1.1
EN 10297-1
C22R 1.1149 1.1 EN 10083-2
C25 1.0406 1.1 EN 10250-2
C25E 1.1158 1.1 EN 10250-2
C30 1.0528 11.1 EN 10250-2
C30E 1.1178 11.1 EN 10132-2
a
The classification of materials is for informational purposes only, as the strength values or limits of chemical
composition specified in this document cane be outside the limits of ISO/TR 15608. But these materials have not exactly
the same behaviour during welding as his sub-group material. Welding conditions should be specifically adapted.
© ISO 2020 – All rights reserved PROOF/ÉPREUVE 3
---------------------- Page: 11 ----------------------
kSIST-TP FprCEN ISO/TR 20172:2021
ISO/TR 20172:2020(E)
Table 1 (continued)
Designation
Group Standard(s)
Name Number
C35 1.0501 11.1 EN 10083-2, EN 10250-2, EN 10277
EN 10083-2, EN 10250-2,
C35E 1.1181 11.1
EN 10297-1, EN 10132-2, EN 10277
C35R 1.1180 11.1 EN 10277
C35R 1.1180 11.2 EN 10083-2
C40 1.0511 11.2 EN 10083-2, EN 10250-2, EN 10277
C40E 1.1186 11.2 EN 10083-2, EN 10132-2, EN 10277
C40R 1.1189 11.2 EN 10083-2, EN 10277
a
C45 1.0503 11.2 EN 10083-2, EN 10250-2, EN 10277
EN 10083-2, EN 10250-2,
a
C45E 1.1191 11.2
EN 10297-1, EN 10132-2
a
C45R 1.1201 11.2 EN 10083-2, EN 10277
C50 1.0540 11.2 EN 10250-2, EN 10277
a
C50E 1.1206 11.3 EN 10277, EN 10083-2
C50R 1.1241 11.3 EN 10083-2, EN 10277
C55 1.0535 11.3 EN 10250-2, EN 10083-2
EN 10083-2, EN 10250-2,
C55E 1.1203 11.3
EN 10132-2
C55R 1.1209 11.3 EN 10083-2
C60 1.0601 11.3 EN 10083-2, EN 10277, EN 10250-2
EN 10083-2, EN 10132-2,
C60E 1.1221 11.3
EN 10250-2, EN 10297-1, EN 10277
C60R 1.1223 11.3 EN 10083-2, EN 10277
EN 10296-1, EN 10305-2,
E155 1.0033 1.1
EN 10305-3, EN 10305-6
E190 1.0031 1.1 EN 10296-1, EN 10305-3
EN 10296-1, EN 10305-3,
E195 1.0034 1.1
EN 10305-6, EN 10305-2
E215 1.0212 1.1 EN 10305-1, EN 10305-4
EN 10296-1, EN 10305-3,
E220 1.0215 1.1
EN 10305-5
EN 10296-1, EN 10297-1, EN 10305-
E235 1.0308 1.1 1, EN 10305-2, EN 10305-3,
EN 10305-4, EN 10305-6
E260 1.0220 1.1 EN 10296-1, EN 10305-3
E260 1.0221 1.1 EN 10305-3
EN 10296-1, EN 10297-1,
E275 1.0225 1.1 EN 10305-2, EN 10305-3,
EN 10305-5, EN 10305-6
E275K2 1.0456 1.1 EN 10296-1, EN 10297-1
E275M 1.8895 1.1 EN 10296-1
E295GC 1.0533 1.2 EN 10277
E315 1.0236 1.2 EN 10297-1
a
The classification of materials is for informational purposes only, as the strength values or limits of chemical
composition specified in this document cane be outside the limits of ISO/TR 15608. But these materials have not exactly
the same behaviour during welding as his sub-group material. Welding conditions should be specifically adapted.
4 PROOF/ÉPREUVE © ISO 2020 – All rights reserved
---------------------- Page: 12 ----------------------
kSIST-TP FprCEN ISO/TR 20172:2021
ISO/TR 20172:2020(E)
Table 1 (continued)
Designation
Group Standard(s)
Name Number
EN 10296-1, EN 10305-3,
E320 1.0237 1.2
EN 10305-5
E335GC 1.0543 1.2 EN 10277
EN 10296-1, EN 10305-2, EN 10305-
a
E355 1.0580 1.2 3, EN 10305-4, EN 10305-6, EN
10305-1, EN 10297-1
E355K2 1.0599 1.2 EN 10297-1
E355K2 1.0920 1.2 EN 10296-1
E355M 1.8896 1.2 EN 10296-1
EN 10296-1, EN 10305-3,
E370 1.0261 1.3
EN 10305-5
E420 1.0575 1.3 EN 10305-3, EN 10305-5
E420J2 1.0920 1.3 EN 10297-1
E420M 1.8897 2.1 EN 10296-1
E460K2 1.8891 1.3 EN 10296-1, EN 10297-1
E460M 1.8898 2.1 EN 10296-1
E470 1.0536 1.3 EN 10297-1
E590K2 1.0644 1.3 EN 10297-1
E730K2 1.8893 1.3 EN 10297-1
G12MoCrV5-2 1.7720 6.1 EN 10213
G17CrMo5-5 1.7357 5.1 EN 10213
G17CrMo9-10 1.7379 5.2 EN 10213
G17CrMoV5-10 1.7706 6.2 EN 10213
G17Mn5 1.1131 1.1 EN 10213
G17NiCrMo13-6 1.6781 9.2 EN 10213
G18Mo5 1.5422 1.2 EN 10213
G20Mn5 1.6220 1.2 EN 10213
G20Mo5 1.5419 1.2 EN 10213
G9Ni10 1.5636 9.1 EN 10213
G9Ni14 1.5638 9.2 EN 10213
GP240GH 1.0619 1.1 EN 10213
GP240GR 1.0621 1.1 EN 10213
GP280GH 1.0625 1.2 EN 10213
GX15CrMo5 1.7365 5.3 EN 10213
GX23CrMoV12-1 1.4931 6.4 EN 10213
GX2CrNi19-11 1.4309 8.1 EN 10213
GX2CrNiMo19-11-2 1.4409 8.1 EN 10213
GX2CrNiMoCuN25-6-3-3 1.4517 10.2 EN 10213
GX2CrNiMoN22-5-3 1.4470 10.1 EN 10213
GX2CrNiMoN26-7-4 1.4469 10.2 EN 10213
GX2NiCrMo28-20-2 1.4458 8.2 EN 10213
GX3CrNi13-4 1.6982 7.2 EN 10213
a
The classification of materials is for informational purposes only, as the strength values or limits of chemical
composition specified in this document cane be outside the limits of ISO/TR 15608. But these materials have not exactly
the same behaviour during welding as his sub-group material. Welding conditions should be specifically adapted.
© ISO 2020 – All rights reserved PROOF/ÉPREUVE 5
---------------------- Page: 13 ----------------------
kSIST-TP FprCEN ISO/TR 20172:2021
ISO/TR 20172:2020(E)
Table 1 (continued)
Designation
Group Standard(s)
Name Number
GX4CrNi13-4 1.4317 7.2 EN 10213
GX4CrNiMo16-5-1 1.4405 7.2 EN 10132-2
GX5CrNi19-10 1.4308 8.1 EN 10213
GX5CrNiMo19-11-2 1.4408 8.1 EN 10213
GX5CrNiMoNb19-11-2 1.4581 8.1 EN 10213
GX5CrNiNb19-11 1.4552 8.1 EN 10213
GX8CrNi12 1.4107 7.2 EN 10213
HC180B 1.0395 1.1 EN 10268
HC180P 1.0342 1.1 EN 10268
HC180Y 1.0922 1.1 EN 10268
HC220B 1.0396 1.1 EN 10268
HC220I 1.0346 1.1 EN 10268
HC220P 1.0397 1.1 EN 10268
HC220Y 1.0925 1.1 EN 10268
HC260B 1.0400 1.1 EN 10268
HC260I 1.0349 1.1 EN 10268
HC260LA 1.0480 1.1 EN 10268
HC260P 1.0417 1.1 EN 10268
HC260Y 1.0928 1.1 EN 10268
HC300B 1.0444 1.2 EN 10268
HC300I 1.0447 1.2 EN 10268
HC300LA 1.0489 1.2 EN 10268
HC300P 1.0448 1.2 EN 10268
HC340LA 1.0548 1.2 EN 10268
HC380LA 1.0550 1.3 EN 10268
HC420LA 1.0556 1.3 EN 10268
L210GA 1.0319 1.1 EN ISO 3183
L235 1.0252 1.1 EN 10224
L235GA 1.0458 1.1 EN ISO 3183
L245GA 1.0459 1.1 EN ISO 3183
L245MB 1.0418 1.1 EN ISO 3183
L245NB 1.0457 1.1 EN ISO 3183
L275 1.0260 1.1 EN 10224
L290GA 1.0483 1.2 EN ISO 3183
L290MB 1.0429 1.2 EN ISO 3183
L290NB 1.0484 1.2 EN ISO 3183
L355 1.0419 1.2 EN 10224
L360GA 1.0499 1.2 EN ISO 3183
L360MB 1.0578 1.2 EN ISO 3183
L360NB 1.0582 1.2 EN ISO 3183
a
The classification of materials is for informational purposes only, as the strength values or limits of chemical
composition specified in this document cane be outside the limits of ISO/TR 15608. But these materials have not exactly
the same behaviour during welding as his sub-group material. Welding conditions should be specifically adapted.
6 PROOF/ÉPREUVE © ISO 2020 – All rights reserved
---------------------- Page: 14 ----------------------
kSIST-TP FprCEN ISO/TR 20172:2021
ISO/TR 20172:2020(E)
Table 1 (continued)
Designation
Group Standard(s)
Name Number
L360QB 1.8948 1.2 EN ISO 3183
L415MB 1.8973 2.1 EN ISO 3183
L415NB 1.8972 1.3 EN ISO 3183
L415QB 1.8947 3.1 EN ISO 3183
L450MB 1.8975 2.1 EN ISO 3183
L450QB 1.8952 3.1 EN ISO 3183
L485MB 1.8977 2.2 EN ISO 3183
L485QB 1.8955 3.1 EN ISO 3183
L550QB 1.8957 3.1 EN ISO 3183
L555MB 1.8978 2.2 EN ISO 3183
P195GH 1.0348 1.1 EN 10216-2, EN 10217-2
P195TR1 1.0107 1.1 EN 10216-1, EN 10217-1
P195TR2 1.0108 1.1 EN 10216-1, EN 10217-1
EN 10216-4, EN 10217-4,
P215NL 1.0451 1.1
EN 10217-6
EN 10216-2, EN 10217-2, EN 10217-
P235GH 1.0345 1.1
5, EN 10273, EN 10028-2
P235S 1.0112 1.1 EN 10207
P235TR1 1.0254 1.1 EN 10216-1, EN 10217-1
P235TR2 1.0255 1.1 EN 10216-1, EN 10217-1
P245GH 1.0352 1.1 EN 10222-2
P245NB 1.0111 1.1 EN 10120
P250GH 1.0460 1.1 EN 10273
P255QL 1.0452 1.1 EN 10216-4
EN 10216-2, EN 10217-2, EN 10217-
P265GH 1.0425 1.1
5, EN 10273, EN 10028-2
P265NB 1.0423 1.1 EN 10120, EN 10149-3
EN 10216-4, EN 10217-4,
P265NL 1.0453 1.1
EN 10217-6
P265S 1.0130 1.1 EN 10207
P265TR1 1.0258 1.1 EN 10216-1, EN 10217-1
P265TR2 1.0259 1.1 EN 10216-1, EN 10217-1
P275N 1.0486 1.1 EN 10028-3
P275NH 1.0487 1.1 EN 10273, EN 10028-3
EN 10216-3, EN 10217-3,
P275NL1 1.0488 1.1
EN 10028-3
EN 10216-3, EN 10217-3,
P275NL2 1.1104 1.1
EN 10028-3
P275S 1.1100 1.1 EN 10207
P280GH 1.0426 1.2 EN 10222-2
P285NH 1.0477 1.2 EN 10222-4
P285QH 1.0478 1.2 EN 10222-4
a
The classification of materials is for informational purposes only, as the strength values or limits of chemical
composition specified in this document cane be outside the limits of ISO/TR 15608. But these materials have not exactly
the same behaviour during welding as his sub-group material. Welding conditions should be specifically adapted.
© ISO 2020 – All rights reserved PROOF/ÉPREUVE 7
---------------------- Page: 15 ----------------------
kSIST-TP FprCEN ISO/TR 20172:2021
ISO/TR 20172:2020(E)
Table 1 (continued)
Designation
Group Standard(s)
Name Number
P295GH 1.0481 1.2 EN 10273, EN 10028-2
P305GH 1.0436 1.2 EN 10222-2
P310NB 1.0437 1.2 EN 10120
P355GH 1.0473 1.2 EN 10273, EN 10028-2
P355M 1.8821 1.2 EN 10028-5
P355ML1 1.8832 1.2 EN 10028-5
P355ML2 1.8833 1.2 EN 10028-5
EN 10216-3, EN 10217-3,
P355N 1.0562 1.2
EN 10028-3
P355NB 1.0557 1.2 EN 10120
EN 10216-3, EN 10217-3, EN 10273,
P355NH 1.0565 1.2
EN 10028-3, EN 10222-4
EN 10216-3, EN 10217-3,
P355NL1 1.0566 1.2
EN 10028-3
EN 10216-3, EN 10217-3,
P355NL2 1.1106 1.2
EN 10028-3
P355Q 1.8866 1.2 EN 10028-6
P355QH 1.8867 1.2 EN 10273, EN 10028-6
P355QH1 1.0571 1.2 EN 10222-4
P355QL1 1.8868 1.2 EN 10028-6
P355QL2 1.8869 1.2 EN 10028-6
P420M 1.8824 2.1 EN 10028-5
P420ML1 1.8835 2.1 EN 10028-5
P420ML2 1.8828 2.1 EN 10028-5
P420NH 1.8932 1.3 EN 10222-4
P420QH 1.8936 3.1 EN 10222-4
P460M 1.8826 2.1 EN 10028-5
P460ML1 1.8837 2.1 EN 10028-5
P460ML2 1.8831 2.1 EN 10028-5
EN 10216-3, EN 10217-3,
P460N 1.8905 1.3
EN 10028-3
P460NH 1.8935 1.3 EN 10273, EN 10216-3, EN 10217-3
P460NH 1.8935 1.3 EN 10028-3
EN 10216-3, EN 10217-3,
P460NL1 1.8915 1.3
EN 10028-3
EN 10216-3, EN 10217-3,
P460NL2 1.8918 1.3
EN 10028-3
P460Q 1.8870 3.1 EN 10028-6
P460QH 1.8871 3.1 EN 10273, EN 10028-6
P460QL1 1.8872 3.1 EN 10028-6
P460QL2 1.8864 3.1 EN 10028-6
P500Q 1.8873 3.1 EN 10028-6
a
The classification of materials is for informational purposes only, as the strength values or limits of chemical
composition specified in this document cane be outside the limits of ISO/TR 15608. But these materials have not exactly
the same behaviour during welding as his sub-group material. Welding conditions should be specifically adapted.
8 PROOF/ÉPREUVE © ISO 2020 – All rights reserved
---------------------- Page: 16 ----------------------
kSIST-TP FprCEN ISO/TR 20172:2021
ISO/TR 20172:2020(E)
Table 1 (continued)
Designation
Group Standard(s)
Name Number
P500QH 1.8874 3.1 EN 10028-6
P500QL1 1.8875 3.1 EN 10028-6
P500QL2 1.8865 3.1 EN 10028-6
P620Q 1.8876 3.1 EN 10216-3
P620QH 1.8877 3.1 EN 10216-2
P620QL 1.8890 3.1 EN 10216-2
P690Q 1.8879 3.1 EN 10216-2, EN 10028-6
P690QH 1.8880 3.1 EN 10216-2, EN 10028-6
P690QL1 1.8881 3.1 EN 10216-2, EN 10028-6
P690QL2 1.8888 3.1 EN 10216-2, EN 10028-6
R200 1.0521 11.3 EN 13674-1
R220 1.0524 11.3 EN 13674-1
R260 1.0623 11.3 EN 13674-1
R260Mn 1.0624 11.3 EN 13674-1
R320Cr 1.0915 11.3 EN 13674-1
R350LHT 1.0632 11.3 EN 13674-1
R50HT 1.0631 11.3 EN 13674-1
S195T 1.0026 1.1 EN 10255
S235J0 1.0114 1.1 EN 10025-2
S235J0W 1.8958 1.4 EN 10025-5
S235J2G3 1.0116 1.1 EN 10250-2, EN 10025-2
S235J2G3C 1.0118 1.1 EN 10025-2
S235J2G4 1.0117 1.1 EN 10025-2
S235J2G4C 1.0119 1.1 EN 10025-2
S235JR 1.0037 1.1 EN 10025-2
S235JRG1 1.0036 1.1 EN 10025-2
S235JRG2 1.0038 1.1 EN 10025-2, EN 10250-2
S235JRG2 1.0122 1.1 EN 10277
S235JRH 1.0039 1.1 EN 10210-1, EN 10219-1
S240GP 1.0021 1.1 EN 10248-1
S260NC 1.0971 1.1 EN 10149-3
S270GP 1.0023 1.1 EN 10248-1
S275J0 1.0143 1.1 EN 10025-2
S275J0H 1.0149 1.1 EN 10210-1, EN 10219-1
S275J2G3 1.0144 1.1 EN 10025-2
S275J2G3C 1.0141 1.1 EN 10025-2
S275J2G4 1.0145 1.1 EN 10025-2
S275J2G4C 1.0142 1.1 EN 10025-2
S275J2H 1.0138 1.1 EN 10210-1, EN 10219-1
S275J2W 1.8961 1.4 EN 10025-5
a
The classification of materials is for informational purposes only, as the strength values or limits of chemical
composition specified in this document cane be outside the limits of ISO/TR 15608. But these materials have not exactly
the same behaviour during welding as his sub-group material. Welding conditions should be specifically adapted.
© ISO 2020 – All rights reserved PROOF/ÉPREUVE 9
---------------------- Page: 17 ----------------------
kSIST-TP FprCEN ISO/TR 20172:2021
ISO/TR 20172:2020(E)
Table 1 (continued)
Designation
Group Standard(s)
Name Number
S275JR 1.0044 1.1 EN 10025-2
S275M 1.8818 1.1 EN 10025-4
S275MH 1.8843 1.1 EN 10219-1
S275ML 1.8819 1.1 EN 10025-4
S275MLH 1.8844 1.1 EN 10219-1
S275N 1.0490 1.1 EN 10025-3
S275NH 1.0493 1.1 EN 10210-1, EN 10219-1
S275NL 1.0491 1.1 EN 10025-3
S275NLH 1.0497 1.1 EN 10210-1, EN 10219-1
S315MC 1.0972 1.2 EN 10149-2
S315NC 1.0973 1.2 EN 10149-3
S320GP 1.0046 1.2 EN 10248-1
S355 G4+M 1.8803+M 1.2 EN 10225
S355G1 1.8814 1.2 EN 10225
S355G1+N 1.8814+N 1.2 EN 10225
S355G10+M 1.8813+M 1.2 EN 10225
S355G10+N 1.8813+N 1.2 EN 10225
S355G11 1.8806 1.2 EN 10225
S355G11+M 1.8806+M 1.2 EN 10225
S355G11+N 1.8806+N 1.2 EN 10225
S355G12 1.8809 1.2 EN 10225
S355G12+M 1.8809+M 1.2 EN 10225
S355G12+N 1.8809+N 1.2 EN 10225
S355G13+N 1.1182+N 1.2 EN 10225
S355G13+Q 1.1182+Q 1.2 EN 10225
S355G14+N 1.1184+N 1.2 EN 10225
S355G14+Q 1.1184+Q 1.2 EN 10225
S355G15+N 1.1190+N 1.2 EN 10225
S355G15+Q 1.1190+Q 1.2 EN 10225
S355G15+Q 1.8852+Q 1.2 EN 10225
S355G1N 1.8814+N 1.2 EN 10225
S355G2+N 1.8801+N 1.2 EN 10225
S355G3+N 1.8802+N 1.2 EN 10225
S355G4 1.8803 1.2 EN 10225
S355G4+M 1.8803+M 1.2 EN 10225
S355G5+M 1.8804+M 1.2 EN 10225
S355G6+M 1.8805+M 1.2 EN 10225
S355G7+M 1.8808+M 1.2 EN 10225
S355G7+N 1.8808+N 1.2 EN 10225
S355G8+M 1.8810+M 1.2 EN 10225
a
The classification of materials is for informational purposes only, as the strength values or limits of chemical
composition specified in this document cane be outside the limits of ISO/TR 15608. But these materials have not exactly
the same behaviour during welding as his sub-group material. Welding conditions should be specifically adapted.
10 PROOF/ÉPREUVE © ISO 2020 – All rights reserved
---------------------- Page: 18 ----------------------
kSIST-TP FprCEN ISO/TR 20172:2021
ISO/TR 20172:2020(E)
Table 1 (continued)
Designation
Group Standard(s)
Name Number
S355G8+N 1.8810+N 1.2 EN 10225
S355G9+M 1.8811+M 1.2 EN 10225
S355G9+N 1.8811+N 1.2 EN 10225
S355GP 1.0083 1.2 EN 10248-1
S355J0 1.0553 1.2 EN 10025-2
S355J0C 1.0554 1.2 EN 10025-2
S355J0H 1.0547 1.2 EN 10210-1, EN 10219-1
S355J0W 1.8959 1.4 EN 10025-5
S355J0WP 1.8945 1.4 EN 10025-5
S355J2 1.0577 1.2 EN 10025-2
S355J2C 1.0579 1.2 EN 10025-2
S355J2G3 1.0570 1.2 EN 10250-2
S355J2G3C 1.0569 1.2 -
S355J2H 1.0576 1.2 EN 10210-1, EN 10219-1
S355J2W 1.8965 1.4 EN 10025-5
S355J2WP 1.8946 1.4 EN 10025-5
S355JR 1.0045 1.2 EN 10025-2
S355JRC 1.0551 1.2 EN 10025-2
S355K2 1.0596 1.2 EN 10025-2
S355K2C 1.0594 1.2 EN 10025-2
S355K2G3C 1.0593 1.2 EN 10025-2
S355K2G4C 1.0594 1.2 EN 10025-2
S355K2W 1.8967 1.4 EN 10025-5
S355M 1.8823 1.2 EN 10025-4
S355MC 1.0976 1.2 EN 10149-2
S355MH 1.8845 1.2 EN 10219-1
S355ML 1.8834 1.2 EN 10025-4
S355MLH 1.8846 1.2 EN 10219-1
S355N 1.0545 1.2 EN 10025-3
S355NC 1.0977 1.2 EN 10149-3
S355NH 1.0539 1.2 EN 10210-1, EN 10219-1
S355NL 1.0546 1.2 EN 10025-3
S355NLH 1.549 1.2 EN 10210-1, EN 10219-1
S390GP 1.0522 1.3 EN 10248-1
S420G1+M 1.8830+M 2.1 EN 10225
S420G1+M 1.8830 2.1 EN 10225
S420G1+Q 1.8830+Q 3.1 EN 10225
S420G1+Q 1.8830 3.1 EN 10225
S420G2+M 1.8857+M 2.1 EN 10225
S420G2+M 1.8857 2.1 EN 10225
a
The classification of materials is for informational purposes only, as the strength values or limits of chemical
composition specified in this document cane be outside the limits of ISO/TR 15608. But these materials have not exactly
the same behaviour during welding as his sub-group material. Welding conditions should be specifically adapted.
© ISO 2020 – All rights reserved PROOF/ÉPREUVE 11
---------------------- Page: 19 ----------------------
kSIST-TP FprCEN ISO/TR 20172:2021
ISO/TR 20172:2020(E)
Table 1 (continued)
Designation
Group Standard(s)
Name Number
S420G2+Q 1.8857+Q 3.1 EN 10225
S420G2+Q 1.8857 3.1 EN 10225
S420G3 1.8851 1.3 EN 10225
S420G3+M 1.8851+M 2.1 EN 10225
S420G4 1.8859 1.3 EN 10225
S420G4+M 1.8859+M 2.1 EN 10225
S420G5+Q 1.8853+Q 3.1 EN 10225
S420G6+Q 1.8852+Q 3.1 EN 10225
S420M 1.8825 2.1 EN 10025-4
S420MC 1.0980 2.1 EN 10149-2
S420MH 1.8847 2.1 EN 10219-1
S420ML 1.8836 2.1 EN 10025-4
S420MLH 1.8848 2.1 EN 10219-1
S420N 1.8902 1.3 EN 10025-3
S420NC 1.0981 1.3 EN 10149-3
S420NL 1.8912 1.3 EN 10025-
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.