SIST EN ISO 10572:2010
(Main)Mixed polyolefin fibre ropes (ISO 10572:2009)
Mixed polyolefin fibre ropes (ISO 10572:2009)
This International Standard specifies requirements for 3-strand hawser-laid, 4-strand shroud-laid, 8-strand braided and 12-strand braided ropes made of mixed polyolefin fibres, and gives rules for their designation.
Polyolefingemisch-Faserseile (ISO 10572:2009)
Diese Internationale Norm legt die Anforderungen an 3-litzige und 4-litzige Seile in Trossenschlag, 8-litzige gefloch¬tene und 12-litzige geflochtene Seile aus Polyolefingemisch und die Regeln für ihre Bezeichnung fest.
Cordages en fibres de polyoléfines mélangées (ISO 10572:2009)
L'ISO 10572:2009 spécifie les exigences applicables aux cordages câblés à 3 torons et à 4 torons ainsi qu'aux cordages tressés à 8 torons et à 12 torons, fabriqués à partir de fibres constituées d'un mélange de polyoléfines, et précise les règles pour leur désignation.
Vlaknene vrvi iz mešanice poliolefinskih vlaken (ISO 10572:2009)
Ta mednarodni standard določa zahteve za 3-nitne vrvi za privezovanje ladij, 4-nitne vrvice za padala, 8-nitne in 12-nitne pletene vlaknene vrvi izdelane iz mešanice poliolefinskih vlaken in podaja pravila za njihovo oznako.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 10572:2010
01-marec-2010
1DGRPHãþD
SIST EN 14687:2005
Vlaknene vrvi iz mešanice poliolefinskih vlaken (ISO 10572:2009)
Mixed polyolefin fibre ropes (ISO 10572:2009)
Polyolefingemisch-Faserseile (ISO 10572:2009)
Cordages en fibres de polyoléfines mélangées (ISO 10572:2009)
Ta slovenski standard je istoveten z: EN ISO 10572:2009
ICS:
59.080.50 Vrvi Ropes
SIST EN ISO 10572:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 10572:2010
---------------------- Page: 2 ----------------------
SIST EN ISO 10572:2010
EUROPEAN STANDARD
EN ISO 10572
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2009
ICS 59.080.50 Supersedes EN 14687:2004
English Version
Mixed polyolefin fibre ropes (ISO 10572:2009)
Cordages en fibres de polyoléfines mélangées (ISO Polyolefingemisch-Faserseile (ISO 10572:2009)
10572:2009)
This European Standard was approved by CEN on 4 November 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10572:2009: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 10572:2010
EN ISO 10572:2009 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 10572:2010
EN ISO 10572:2009 (E)
Foreword
This document (EN ISO 10572:2009) has been prepared by Technical Committee ISO/TC 38 "Textiles" in
collaboration with Technical Committee CEN/TC 248 “Textiles and textile products” the secretariat of which is
held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2010, and conflicting national standards shall be withdrawn at
the latest by June 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 14687:2004.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 10572:2009 has been approved by CEN as a EN ISO 10572:2009 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 10572:2010
---------------------- Page: 6 ----------------------
SIST EN ISO 10572:2010
INTERNATIONAL ISO
STANDARD 10572
First edition
2009-12-01
Mixed polyolefin fibre ropes
Cordages en fibres de polyoléfines mélangées
Reference number
ISO 10572:2009(E)
©
ISO 2009
---------------------- Page: 7 ----------------------
SIST EN ISO 10572:2010
ISO 10572:2009(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED DOCUMENT
© ISO 2009
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2009 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 10572:2010
ISO 10572:2009(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 10572 was prepared by Technical Committee ISO/TC 38, Textiles.
© ISO 2009 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 10572:2010
---------------------- Page: 10 ----------------------
SIST EN ISO 10572:2010
INTERNATIONAL STANDARD ISO 10572:2009(E)
Mixed polyolefin fibre ropes
1 Scope
This International Standard specifies requirements for 3-strand hawser-laid, 4-strand shroud-laid, 8-strand
braided and 12-strand braided ropes made of mixed polyolefin fibres, and gives rules for their designation.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 1968, Fibre ropes and cordage — Vocabulary
ISO 2307, Fibre ropes — Determination of certain physical and mecha
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.