Fibre ropes - Polyamide - 3-, 4-, 8- and 12-strand ropes (ISO 1140:2021)

This document specifies requirements for 3-strand hawser-laid and 4-strand shroud-laid ropes,
8-strand braided ropes and 12-strand braided ropes for general service made of polyamide, and gives
rules for their designation.
This document does not cover all variations in strength or product performance. The rope manufacturer
is consulted to ensure the intended design meets the requirements of the application

Faserseile - Polyamid - 3-, 4-, 8- und 12-litzige Seile (ISO 1140:2021)

Dieses Dokument legt Anforderungen an 3 litzige und 4 litzige Seile in Trossenschlag sowie an 8 litzige geflochtene Seile und 12 litzige geflochtene Seile aus Polyamid für die allgemeine Verwendung fest und gibt die Regeln für ihre Bezeichnung an.
Dieses Dokument deckt nicht alle Schwankungen der Festigkeit oder Produktleistung ab. Der Seilhersteller wird konsultiert, um sicherzustellen, dass das beabsichtigte Design den Anforderungen der Anwendung entspricht.

Cordages en fibres - Polyamide - Cordages à 3, 4, 8 et 12 torons (ISO 1140:2021)

Le présent document spécifie les exigences relatives aux cordages câblés à 3 torons et à 4 torons, ainsi qu’aux cordages tressés à 8 torons et à 12 torons, en polyamide, pour usages divers, et précise les règles de leur désignation.
Le présent document ne couvre pas toutes les variations de résistance ou de performance des produits. Consulter le fabricant du cordage pour s’assurer que la conception prévue satisfait aux exigences de l’application.

Vlaknene vrvi - Poliamid - 3-, 4-, 8- in 12-pramenske vrvi (ISO 1140:2021)

General Information

Status
Published
Public Enquiry End Date
29-Sep-2020
Publication Date
25-May-2021
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
19-May-2021
Due Date
24-Jul-2021
Completion Date
26-May-2021

Relations

Buy Standard

Standard
EN ISO 1140:2021
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 1140:2020
German language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 1140:2021
01-julij-2021
Nadomešča:
SIST EN ISO 1140:2012
Vlaknene vrvi - Poliamid - 3-, 4-, 8- in 12-pramenske vrvi (ISO 1140:2021)
Fibre ropes - Polyamide - 3-, 4-, 8- and 12-strand ropes (ISO 1140:2021)
Faserseile - Polyamid - 3-, 4-, 8- und 12-litzige Seile (ISO 1140:2021)
Cordages en fibres - Polyamide - Cordages à 3, 4, 8 et 12 torons (ISO 1140:2021)
Ta slovenski standard je istoveten z: EN ISO 1140:2021
ICS:
59.080.50 Vrvi Ropes
SIST EN ISO 1140:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 1140:2021

---------------------- Page: 2 ----------------------
SIST EN ISO 1140:2021


EN ISO 1140
EUROPEAN STANDARD

NORME EUROPÉENNE

May 2021
EUROPÄISCHE NORM
ICS 59.080.50 Supersedes EN ISO 1140:2012
English Version

Fibre ropes - Polyamide - 3-, 4-, 8- and 12-strand ropes
(ISO 1140:2021)
Cordages en fibres - Polyamide - Cordages à 3, 4, 8 et Faserseile - Polyamid - 3-, 4-, 8- und 12-litzige Seile
12 torons (ISO 1140:2021) (ISO 1140:2021)
This European Standard was approved by CEN on 22 April 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1140:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 1140:2021
EN ISO 1140:2021 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 1140:2021
EN ISO 1140:2021 (E)
European foreword
This document (EN ISO 1140:2021) has been prepared by Technical Committee ISO/TC 38 "Textiles" in
collaboration with Technical Committee CEN/TC 248 “Textiles and textile products” the secretariat of
which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2021, and conflicting national standards
shall be withdrawn at the latest by November 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 1140:2012.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 1140:2021 has been approved by CEN as EN ISO 1140:2021 without any modification.


3

---------------------- Page: 5 ----------------------
SIST EN ISO 1140:2021

---------------------- Page: 6 ----------------------
SIST EN ISO 1140:2021
INTERNATIONAL ISO
STANDARD 1140
Fifth edition
2021-04
Fibre ropes — Polyamide — 3-, 4-, 8-
and 12-strand ropes
Cordages en fibres — Polyamide — Cordages à 3, 4, 8 et 12 torons
Reference number
ISO 1140:2021(E)
©
ISO 2021

---------------------- Page: 7 ----------------------
SIST EN ISO 1140:2021
ISO 1140:2021(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved

---------------------- Page: 8 ----------------------
SIST EN ISO 1140:2021
ISO 1140:2021(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Designation . 1
5 General requirements . 2
6 Physical properties . 3
7 Marking . 7
© ISO 2021 – All rights reserved iii

---------------------- Page: 9 ----------------------
SIST EN ISO 1140:2021
ISO 1140:2021(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 38, Textiles, in collaboration with the
European Committee for Standardization (CEN) Technical Committee CEN/TC 248, Textiles and textile
products, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna
Agreement).
This fifth edition cance
...

SLOVENSKI STANDARD
oSIST prEN ISO 1140:2020
01-september-2020
Vlaknene vrvi - Poliamid - 3-, 4-, 8- in 12-pramenske vrvi (ISO/DIS 1140:2020)
Fibre ropes - Polyamide - 3-, 4-, 8- and 12-strand ropes (ISO/DIS 1140:2020)
Faserseile - Polyamid - 3-, 4-, 8- und 12-litzige Seile (ISO/DIS 1140:2020)
Cordages en fibres - Polyamide - Cordages à 3, 4, 8 et 12 torons (ISO/DIS 1140:2020)
Ta slovenski standard je istoveten z: prEN ISO 1140
ICS:
59.080.50 Vrvi Ropes
oSIST prEN ISO 1140:2020 de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 1140:2020

---------------------- Page: 2 ----------------------
oSIST prEN ISO 1140:2020


ENTWURF
EUROPÄISCHE NORM
prEN ISO 1140
EUROPEAN STANDARD

NORME EUROPÉENNE

Juni 2020
ICS 59.080.50 Vorgesehen als Ersatz für EN ISO 1140:2012
Deutsche Fassung

Faserseile - Polyamid - 3-, 4-, 8- und 12-litzige Seile (ISO/DIS
1140:2020)
Fibre ropes - Polyamide - 3-, 4-, 8- and 12-strand ropes Cordages en fibres - Polyamide - Cordages à 3, 4, 8 et 12
(ISO/DIS 1140:2020) torons (ISO/DIS 1140:2020)
Dieser Europäische Norm-Entwurf wird den CEN-Mitgliedern zur parallelen Umfrage vorgelegt. Er wurde vom Technischen
Komitee CEN/TC 248 erstellt.

Wenn aus diesem Norm-Entwurf eine Europäische Norm wird, sind die CEN-Mitglieder gehalten, die CEN-Geschäftsordnung zu
erfüllen, in der die Bedingungen festgelegt sind, unter denen dieser Europäischen Norm ohne jede Änderung der Status einer
nationalen Norm zu geben ist.

Dieser Europäische Norm-Entwurf wurde von CEN in drei offiziellen Fassungen (Deutsch, Englisch, Französisch) erstellt. Eine
Fassung in einer anderen Sprache, die von einem CEN-Mitglied in eigener Verantwortung durch Übersetzung in seine
Landessprache gemacht und dem CEN-CENELEC-Management-Zentrum mitgeteilt worden ist, hat den gleichen Status wie die
offiziellen Fassungen.

CEN-Mitglieder sind die nationalen Normungsinstitute von Belgien, Bulgarien, Dänemark, Deutschland, Estland, Finnland,
Frankreich, Griechenland, Irland, Island, Italien, Kroatien, Lettland, Litauen, Luxemburg, Malta, den Niederlanden, Norwegen,
Österreich, Polen, Portugal, der Republik Nordmazedonien, Rumänien, Schweden, der Schweiz, Serbien, der Slowakei, Slowenien,
Spanien, der Tschechischen Republik, der Türkei, Ungarn, dem Vereinigten Königreich und Zypern.

Die Empfänger dieses Norm-Entwurfs werden gebeten, mit ihren Kommentaren jegliche relevante Patentrechte, die sie kennen,
mitzuteilen und unterstützende Dokumentationen zur Verfügung zu stellen.

Warnvermerk : Dieses Schriftstück hat noch nicht den Status einer Europäischen Norm. Es wird zur Prüfung und Stellungnahme
vorgelegt. Es kann sich noch ohne Ankündigung ändern und darf nicht als Europäischen Norm in Bezug genommen werden.


EUROPÄISCHES KOMITEE FÜR NORMUNG
EUROPEAN COMMITTEE FOR STANDARDIZATION

COMITÉ EUROPÉEN DE NORMALISATION

CEN-CENELEC Management-Zentrum: Rue de la Science 23, B-1040 Brüssel
© 2020 CEN Alle Rechte der Verwertung, gleich in welcher Form und in welchem Ref. Nr. prEN ISO 1140:2020 D
Verfahren, sind weltweit den nationalen Mitgliedern von CEN
vorbehalten.

---------------------- Page: 3 ----------------------
oSIST prEN ISO 1140:2020
prEN ISO 1140:2020 (D)
Inhalt
Seite
Europäisches Vorwort . 3
Vorwort . 4
1 Anwendungsbereich . 5
2 Normative Verweisungen . 5
3 Begriffe . 5
4 Bezeichnung . 5
5 Allgemeine Anforderungen . 6
6 Physikalische Eigenschaften . 7
7 Kennzeichnung . 10


2

---------------------- Page: 4 ----------------------
oSIST prEN ISO 1140:2020
prEN ISO 1140:2020 (D)
Europäisches Vorwort
Dieses Dokument (prEN ISO 1140:2020) wurde vom Technischen Komitee ISO/TC 38 „Textiles“ in
Zusammenarbeit mit dem Technischen Komitee CEN/TC 248 „Textilien und textile Erzeugnisse“ erarbeitet,
dessen Sekretariat von BSI gehalten wird.
Dieses Dokument ist derzeit zur parallelen Umfrage vorgelegt.
Dieses Dokument wird EN ISO 1140:2012 ersetzen.
Anerkennungsnotiz
Der Text von ISO/DIS 1140:2020 wurde von CEN als prEN ISO 1140:2020 ohne irgendeine Abänderung
genehmigt.
3

---------------------- Page: 5 ----------------------
oSIST prEN ISO 1140:2020
prEN ISO 1140:2020 (D)
Vorwort
ISO (die Internationale Organisation für Normung) ist eine weltweite Vereinigung nationaler Normungs-
institute (ISO-Mitgliedsorganisationen). Die Erstellung von Internationalen Normen wird üblicherweise von
Technischen Komitees von ISO durchgeführt. Jede Mitgliedsorganisation, die Interesse an einem Thema hat,
für welches ein Technisches Komitee gegründet wurde, hat das Recht, in diesem Komitee vertreten zu sein.
Internationale staatliche und nichtstaatliche Organisationen, die in engem Kontakt mit ISO stehen, nehmen
ebenfalls an der Arbeit teil. ISO arbeitet bei allen elektrotechnischen Normungsthemen eng mit der
Internationalen Elektrotechnischen Kommission (IEC) zusammen.
Internationale Normen werden in Übereinstimmung mit den Gestaltungsregeln der ISO/IEC-Direktiven,
Teil 2 erarbeitet.
Die Hauptaufgabe der Technischen Komitees besteht in dem Erarbeiten von Internationalen Normen. Die
von den Technischen Komitees angenommenen Norm-Entwürfe werden den Mitgliedsorganisationen zur
Umfrage zur Verfügung gestellt. Für eine Veröffentlichung als Internationale Norm wird eine Zustimmung
von mindestens 75 % der Mitgliedsländer, die abgestimmt haben, benötigt.
Es wird auf die Möglichkeit hingewiesen, dass einige Elemente dieses Dokuments Patentrechte berühren
können. ISO ist nicht dafür verantwortlich, einige oder alle diesbezüglichen Patentrechte zu identifizieren.
ISO 1140 wurde vom Technischen Komitee ISO/TC 38, Textiles, erarbeitet.
Diese zweite/dritte/… Ausgabe ersetzt die erste/zweite/… Ausgabe (), [Abschnitt(e) / Unterabschnitt(e) /
Tabelle(n) / Bilde(r) / Anhang/Anhänge] von denen [wurde / wurden] technisch überarbeitet.
4

---------------------- Page: 6 ----------------------
oSIST prEN ISO 1140:2020
prEN ISO 1140:2020 (D)
1 Anwendungsbereich
Diese Internationale Norm legt Anforderungen an 3-litzige und 4-litzige Seile in Trossenschlag sowie an
8-litzige geflochtene Seile und 12-litzige geflochtene Seile aus Polyamid für die allgemeine Verwendung fest
und gibt die Regeln für ihre Bezeichnung.
Diese Internationale Norm deckt nicht alle Schwankungen der Festigkeit oder Produktleistung ab. Der
Seilhersteller sollte konsultiert werden, um sicherzustellen, dass das beabsichtigte Design den
Anforderungen der Anwendung entspricht.
2 Normative Verweisungen
Die folgenden Dokumente werden im Text in solcher Weise in Bezug genommen, dass einige Teile davon
oder ihr gesamter Inh
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.