SIST EN ISO 8130-16:2023
(Main)Coating powders - Part 16: Determination of density by liquid displacement in a measuring cylinder (ISO 8130-16:2022)
Coating powders - Part 16: Determination of density by liquid displacement in a measuring cylinder (ISO 8130-16:2022)
This document specifies a method for determining the density of coating powders by liquid displacement
in a measuring cylinder. The method is based on a determination of the mass and the volume of a test
portion. It can be used for all types of coating powders.
NOTE If the powder does not swell in contact with the displacement liquid used and if the displacement liquid
replaces the air between the powder particles, it can then be used and compared with the method described in
ISO 8130-3.
Pulverlacke - Teil 16: Bestimmung der Dichte mittels Flüssigkeitsverdrängung in einem Messzylinder (ISO 8130-16:2022)
Poudres pour revêtement - Partie 16: Détermination de la masse volumique par déplacement d’un liquide dans une éprouvette graduée (ISO 8130-16:2022)
Le présent document spécifie une méthode de détermination de la masse volumique de poudres pour revêtement, par déplacement d’un liquide dans une éprouvette graduée. Cette méthode repose sur la détermination de la masse et du volume d’une prise d’essai. Elle peut être utilisée pour tous les types de poudres pour revêtement.
NOTE Si la poudre ne gonfle pas au contact du liquide auxiliaire utilisé et si ce liquide remplace l’air qui se trouve entre les particules de poudre, la méthode peut être utilisée et comparée à celle décrite dans l’ISO 8130-3.
Praškasti premazi - 16. del: Določanje gostote z izpodrivom tekočine v merilnem valju (ISO 8130-16:2022)
Ta dokument določa metodo za določanje gostote praškastih premazov z izpodrivom tekočine v merilnem valju. Metoda temelji na določevanju mase in prostornine preskusnega vzorca. Uporabljati jo je mogoče za vse vrste praškastih premazov.
OPOMBA: Če prah ob stiku z uporabljeno izpodrivno tekočino ne nabrekne in izpodrivna tekočina izpodrine zrak med delci prahu, je mogoče metodo uporabiti in primerjati z metodo, opisano v standardu ISO 8130-3.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 8130-16:2023
01-december-2023
Praškasti premazi - 16. del: Določanje gostote z izpodrivom tekočine v merilnem
valju (ISO 8130-16:2022)
Coating powders - Part 16: Determination of density by liquid displacement in a
measuring cylinder (ISO 8130-16:2022)
Pulverlacke - Teil 16: Bestimmung der Dichte mittels Flüssigkeitsverdrängung in einem
Messzylinder (ISO 8130-16:2022)
Poudres pour revêtement - Partie 16: Détermination de la masse volumique par
déplacement d’un liquide dans une éprouvette graduée (ISO 8130-16:2022)
Ta slovenski standard je istoveten z: EN ISO 8130-16:2023
ICS:
87.040 Barve in laki Paints and varnishes
SIST EN ISO 8130-16:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 8130-16:2023
---------------------- Page: 2 ----------------------
SIST EN ISO 8130-16:2023
EN ISO 8130-16
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2023
EUROPÄISCHE NORM
ICS 87.040
English Version
Coating powders - Part 16: Determination of density by
liquid displacement in a measuring cylinder (ISO 8130-
16:2022)
Poudres pour revêtement - Partie 16: Titre manque Pulverlacke - Teil 16: Bestimmung der Dichte mittels
(ISO 8130-16:2022) Flüssigkeitsverdrängung in einem Messzylinder (ISO
8130-16:2022)
This European Standard was approved by CEN on 24 August 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8130-16:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 8130-16:2023
EN ISO 8130-16:2023 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 8130-16:2023
EN ISO 8130-16:2023 (E)
European foreword
The text of ISO 8130-16:2022 has been prepared by Technical Committee ISO/TC 35 "Paints and
varnishes” of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 8130-16:2023 by Technical Committee CEN/TC 139 “Paints and varnishes” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2024, and conflicting national standards
shall be withdrawn at the latest by February 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 8130-16:2022 has been approved by CEN as EN ISO 8130-16:2023 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 8130-16:2023
-----
...
SLOVENSKI STANDARD
oSIST prEN ISO 8130-16:2023
01-maj-2023
Praškasti premazi - 16. del: Določanje gostote z izpodrivom tekočine v merilnem
valju (ISO 8130-16:2022)
Coating powders - Part 16: Determination of density by liquid displacement in a
measuring cylinder (ISO 8130-16:2022)
Pulverlacke - Teil 16: Bestimmung der Dichte mittels Flüssigkeiteverdrängung in einem
Messzylinder (ISO 8130-16:2022)
Poudres pour revêtement - Partie 16: Titre manque (ISO 8130-16:2022)
Ta slovenski standard je istoveten z: prEN ISO 8130-16
ICS:
87.040 Barve in laki Paints and varnishes
oSIST prEN ISO 8130-16:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 8130-16:2023
---------------------- Page: 2 ----------------------
oSIST prEN ISO 8130-16:2023
INTERNATIONAL ISO
STANDARD 8130-16
First edition
2022-10
Coating powders —
Part 16:
Determination of density by liquid
displacement in a measuring cylinder
Reference number
ISO 8130-16:2022(E)
© ISO 2022
---------------------- Page: 3 ----------------------
oSIST prEN ISO 8130-16:2023
ISO 8130-16:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
© ISO 2022 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 8130-16:2023
ISO 8130-16:2022(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Materials . 1
6 Apparatus . 2
7 Sampling . 2
8 Procedure .2
8.1 Number of determinations and test temperature. 2
8.2 Determination of the density of the displacement liquid . 2
9 Expression of results . 2
10 Precision . 3
11 Test report .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.