oSIST prEN IEC 62841-4-9:2023/oprAA:2023
(Amendment)Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-9: Particular requirements for chain saws for tree service
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-9: Particular requirements for chain saws for tree service
Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 4-9: Exigences particulières pour les scies à chaîne alimentées par batterie pour l’élagage des arbres
No scope available
Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 4-9. del: Posebne zahteve za verižne žage za nego dreves - Dopolnilo AA
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 62841-4-9:2023/oprAA:2023
01-november-2023
Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 4-
9. del: Posebne zahteve za verižne žage za nego dreves - Dopolnilo AA
Electric motor-operated hand-held tools, transportable tools and lawn and garden
machinery - Safety - Part 4-9: Particular requirements for chain saws for tree service
Ta slovenski standard je istoveten z: prEN IEC 62841-4-9:2023/prAA:2023
ICS:
25.140.20 Električna orodja Electric tools
65.060.70 Vrtnarska oprema Horticultural equipment
oSIST prEN IEC 62841-4- en
9:2023/oprAA:2023
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 62841-4-9:2023/oprAA:2023
---------------------- Page: 2 ----------------------
oSIST prEN IEC 62841-4-9:2023/oprAA:2023
EUROPEAN STANDARD DRAFT
prEN IEC 62841-4-9
NORME EUROPÉENNE
EUROPÄISCHE NORM
prAA
September 2023
ICS -
English Version
Electric motor-operated hand-held tools, transportable tools and
lawn and garden machinery - Safety - Part 4-9: Particular
requirements for chain saws for tree service
To be completed To be completed
This draft amendment prAA, if approved, will modify the European Standard prEN IEC 62841-4-9; it is submitted to CENELEC members for
enquiry.
Deadline for CENELEC: 2023-11-24.
It has been drawn up by CLC/TC 116.
If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 78418 Ref. No. prEN IEC 62841-4-9:2023/prAA:2023 E
---------------------- Page: 3 ----------------------
oSIST prEN IEC 62841-4-9:2023/oprAA:2023
prEN IEC 62841-4-9:2023/prAA:2023 (E)
1 Contents Page
2 European foreword . 3
3 1 Modification to Clause 2, “Normative references” . 5
4 2 Modifications to Clause 8, “Marking and instructions” . 5
5 3 Modification to Annex I, “Measurement of noise and vibration emissions” . 5
6 4 Modifications to Annex K, “Battery tools and battery packs” . 5
7 5 Addition of Annex ZA, “Normative references to international publications with their
8 corresponding European publications” . 6
9 6 Addition of Annex ZZ, “Relationship between this European Standard and the essential
10 requirements of Directive 2006/42/EC aimed to be covered” . 8
2
---------------------- Page: 4 ----------------------
oSIST prEN IEC 62841-4-9:2023/oprAA:2023
prEN IEC 62841-4-9:2023/prAA:2023 (E)
11 European foreword
12 This document (prEN IEC 62841-4-9:2023/prAA:2023) has been prepared by CLC/TC 116 “Safety and
13 environmental aspects of motor-operated electric tools”.
14 This document is currently submitted to the Enquiry.
15 The following dates are proposed:
• latest date by which the existence of this (doa) dor + 6 months
document has to be announced at national
level
• latest
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.