SIST EN 4842:2019
(Main)Aerospace series - X5CrNiCu15-5 (1.4545) - Consumable electrode remelted (ESR or VAR) - Solution treated and precipitation treated (H1025) - Bar for machining - a or D ≤ 250 mm - 1 070 MPa ≤ Rm ≤ 1 200 MPa - Premium quality (pq)
Aerospace series - X5CrNiCu15-5 (1.4545) - Consumable electrode remelted (ESR or VAR) - Solution treated and precipitation treated (H1025) - Bar for machining - a or D ≤ 250 mm - 1 070 MPa ≤ Rm ≤ 1 200 MPa - Premium quality (pq)
This document specifies the requirements relating to:
X5CrNiCu15-5 (1.4545)
Consumable electrode remelted (ESR or VAR)
Solution treated and precipitation treated (H1025)
Bar for machining
a or D ≤ 250 mm
1 070 MPa ≤ Rm ≤ 1 200 MPa
Premium quality (pq)
for aerospace applications.
NOTE Other designation:
Only the chemical composition of this standard must be considered.
Luft- und Raumfahrt - X5CrNiCu15-5 (1.4545) - Mit selbstverzehrender Elektrode umgeschmolzen (ESR oder VAR - lösungsgeglüht und ausgelagert (H1025) - Stangen zur spanenden Bearbeitung - a oder D ≤ 250 mm - 1 070 MPa ≤ Rm ≤ 1 200 MPa - Beste Güte (pq)
Série aérospatiale - X5CrNiCu15-5 (1.4545) - Refondu à l'électrode consommable (ESR ou VAR) - Mis en solution et vieilli (H1025) - Barres pour usinage - a ou D ≤ 250 mm - 1 070 MPa ≤ Rm ≤ 1 200 MPa - Première qualité (pq)
Aeronavtika - X5CrNiCu15-5 (1.4545) - Pretaljeno s talilno elektrodo (ESR ali VAR) - Topilno žarjeno in izločevalno utrjeno (H1025) - Palice za obdelavo - a ali D ≤ 250 mm - 1070 MPa ≤ Rm ≤ 1200 MPa - Visoka stopnja kakovosti (pq)
Ta dokument določa zahteve, ki se nanašajo na:
X5CrNiCu15-5 (1.4545)
pretaljene s talilno elektrodo (ESR ali VAR),
topilno žarjene in izločevalno utrjene (H1025),
palice za obdelavo,
a ali D ≤ 250 mm,
1070 MPa ≤ Rm ≤ 1200 MPa,
visoke stopnje kakovosti (pq)
za uporabo v aeronavtiki.
OPOMBA: Druga oznaka:
Treba je upoštevati le kemijski sestav tega standarda.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 4842:2019
01-september-2019
Aeronavtika - X5CrNiCu15-5 (1.4545) - Pretaljeno s talilno elektrodo (ESR ali VAR) -
Topilno žarjeno in izločevalno utrjeno (H1025) - Palice za obdelavo - a ali D ≤ 250
mm - 1070 MPa ≤ Rm ≤ 1200 MPa - Visoka stopnja kakovosti (pq)
Aerospace series - X5CrNiCu15-5 (1.4545) - Consumable electrode remelted (ESR or
VAR) - Solution treated and precipitation treated (H1025) - Bar for machining - a or D ≤
250 mm - 1 070 MPa ≤ Rm ≤ 1 200 MPa - Premium quality (pq)
Luft- und Raumfahrt - X5CrNiCu15-5 (1.4545) - Mit selbstverzehrender Elektrode
umgeschmolzen (ESR oder VAR - lösungsgeglüht und ausgelagert (H1025) - Stangen
zur spanenden Bearbeitung - a oder D ≤ 250 mm - 1 070 MPa ≤ Rm ≤ 1 200 MPa -
Beste Güte (pq)
Série aérospatiale - X5CrNiCu15-5 (1.4545) - Refondu à l'électrode consommable (ESR
ou VAR) - Mis en solution et vieilli (H1025) - Barres pour usinage - a ou D ≤ 250 mm - 1
070 MPa ≤ Rm ≤ 1 200 MPa - Première qualité (pq)
Ta slovenski standard je istoveten z: EN 4842:2019
ICS:
49.025.15 Neželezove zlitine na Non-ferrous alloys in general
splošno
SIST EN 4842:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 4842:2019
---------------------- Page: 2 ----------------------
SIST EN 4842:2019
EN 4842
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2019
EUROPÄISCHE NORM
ICS 49.025.15
English Version
Aerospace series - X5CrNiCu15-5 (1.4545) - Consumable
electrode remelted (ESR or VAR) - Solution treated and
precipitation treated (H1025) - Bar for machining - a or D
≤ 250 mm - 1 070 MPa ≤ Rm ≤ 1 200 MPa - Premium
quality (pq)
Série aérospatiale - X5CrNiCu15-5 (1.4545) - Refondu à Luft- und Raumfahrt - X5CrNiCu15-5 (1.4545) - Mit
l'électrode consommable (ESR ou VAR) - Mis en selbstverzehrender Elektrode umgeschmolzen (ESR
solution et vieilli (H1025) - Barres pour usinage - a ou oder VAR - lösungsgeglüht und ausgelagert (H1025) -
D ≤ 250 mm - 1 070 MPa ≤ Rm ≤ 1 200 MPa - Première Stangen zur spanenden Bearbeitung - a oder D ≤ 250
qualité (pq)
mm - 1 070 MPa ≤ Rm ≤ 1 200 MPa - Beste Güte (pq)
This European Standard was approved by CEN on 14 October 2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4842:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 4842:2019
EN 4842:2019 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Requirements . 6
2
---------------------- Page: 4 ----------------------
SIST EN 4842:2019
EN 4842:2019 (E)
European foreword
This document (EN 4842
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.