SIST EN 3879:2023

Aerospace series - Metallic materials - Filler metal for welding - Technical specification

This document defines the requirements for the ordering, manufacture, testing, inspection and delivery of all forms of filler metal. It shall be applied when referred to and in conjunction with the EN material standard unless otherwise specified on the drawing, order or inspection schedule.

Luft- und Raumfahrt - Metallische Werkstoffe - Schweisszusatz - Technische Lieferbedingungen

Dieses Dokument legt die Anforderungen an die Bestellung, Herstellung, Prüfung und Lieferung aller Formen von Schweißzusätzen fest. Es ist in Verbindung mit der entsprechenden EN Werkstoffnorm anzuwenden, sofern in der Zeichnung, Bestellung oder der Prüfanweisung nichts anderes angegeben ist.

Série aérospatiale - Matériaux métalliques - Métal d'apport de soudage - Spécification technique

Le présent document définit les exigences relatives aux commandes, à la fabrication, aux essais, aux contrôles et à la livraison de toutes les formes de métal d’apport. Il est applicable lorsqu'il est cité et conjointement avec la norme de matériaux EN sauf spécification contraire figurant sur le dessin, la commande ou la fiche d'essais.

Aeronavtika - Kovinski materiali - Kovinsko polnilo za varjenje - Tehnična specifikacija

Ta dokument opredeljuje zahteve za naročanje, proizvodnjo, preskušanje, pregled ter dobavo vseh vrst kovinskega polnila. Uporablja se, kadar se nanj sklicuje, in v povezavi s standardom za materiale EN, razen če je na skici, naročilu ali programu pregledov navedeno drugače.

General Information

• Status: Withdrawn
• Publication Date: 01-Mar-2023
• Withdrawal Date: 26-May-2024
• ICS: 25.160.20 - Welding consumables
• ICS: 49.025.05 - Ferrous alloys in general
• ICS: 49.025.15 - Non-ferrous alloys in general
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 27-May-2024
• Due Date: 19-Jun-2024
• Completion Date: 27-May-2024
• Ref Project: EN 3879:2023 - Aerospace series - Metallic materials - Filler metal for welding - Technical specification

Relations

• Revised: SIST EN 4877-001:2024 - Aerospace series - Filler metals for welding - Part 001: Technical specification
• Effective Date: 07-Jun-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 3879:2023
01-april-2023
Aeronavtika - Kovinski materiali - Kovinsko polnilo za varjenje - Tehnična
specifikacija
Aerospace series - Metallic materials - Filler metal for welding - Technical specification
Luft- und Raumfahrt - Metallische Werkstoffe - Schweisszusatz - Technische
Lieferbedingungen
Série aérospatiale - Matériaux métalliques - Métal d'apport de soudage - Spécification
technique
Ta slovenski standard je istoveten z: EN 3879:2023
ICS:
25.160.20 Potrošni material pri varjenju Welding consumables
49.025.05 Železove zlitine na splošno Ferrous alloys in general
SIST EN 3879:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 3879:2023

---------------------- Page: 2 ----------------------
SIST EN 3879:2023


EN 3879
EUROPEAN STANDARD

NORME EUROPÉENNE

February 2023
EUROPÄISCHE NORM
ICS 25.160.20; 49.025.05; 49.025.15
English Version

Aerospace series - Metallic materials - Filler metal for
welding - Technical specification
Série aérospatiale - Matériaux métalliques - Métal Luft- und Raumfahrt - Metallische Werkstoffe -
d'apport de soudage - Spécification technique Schweisszusatz - Technische Lieferbedingungen
This European Standard was approved by CEN on 24 February 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3879:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 3879:2023
EN 3879:2023 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Wording of order . 6
5 Health and safety . 6
6 Technical requirements . 6
6.1 General. 6
6.2 Qualification requirements . 7
6.3 Release requirements . 7
6.3.1 Release tests . 7
6.3.2 Retests .
...