SIST EN 4825:2021

Aerospace series - Steel X12CrNiMoV12-3 (1.4938) - Air melted and consumable electrode remelted - Hardened and tempered - Bars - De ≤ 150 mm - 900 MPa ≤ Rm ≤ 1 100 MPa

This document specifies the requirements relating to:
Steel X12CrNiMoV12-3 (1.4938)
Air melted and consumable electrode remelted
Hardened and tempered
Bars
De ≤ 150 mm
900 MPa ≤ Rm ≤ 1 100 MPa
for aerospace applications.

Luft- und Raumfahrt - Stahl X12CrNiMoV12-3 (1.4938) - Lufterschmolzen und mit selbstverzehrender Elektrode umgeschmolzen - Gehärtet- und angelassen - Stangen - De ≤ 150 mm - 900 MPa ≤ Rm ≤ 1 100 MPa

Dieses Dokument legt die Anforderungen an:
Stahl X12CrNiMoV12 3 (1.4938)
Lufterschmolzen und mit selbstverzehrender Elektrode umgeschmolzen
Gehärtet und angelassen
Stangen
De ≤ 150 mm
900 MPa ≤ Rm ≤ 1 100 MPa
für Anwendungen in der Luft  und Raumfahrt fest.

Série aérospatiale - Acier X12CrNiMoV12-3 (1.4938) - Élaboré à l'air et refondu à l'électrode consommable - Trempé et revenu - Barres - De ≤ 150 mm - 900 MPa ≤ Rm ≤ 1 100 MPa

Aeronavtika - Jeklo X12CrNiMoV12-3 (1.4938) - Taljeno na zraku in pretaljeno s taljivo elektrodo - Utrjeno in mehko žarjeno - Palice - De ≤ 150 mm - 900 MPa ≤ Rm ≤ 1 100 MPa

General Information

• Status: Published
• Publication Date: 13-May-2021
• ICS: 49.025.10 - Steels
• ICS: 77.140.60 - Steel bars and rods
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 13-May-2021
• Due Date: 18-Jul-2021
• Completion Date: 14-May-2021
• Ref Project: EN 4825:2021 - Aerospace series - Steel X12CrNiMoV12-3 (1.4938) - Air melted and consumable electrode remelted - Hardened and tempered - Bars - De ≤ 150 mm - 900 MPa ≤ Rm ≤ 1 100 MPa

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 4825:2021
01-julij-2021
Aeronavtika - Jeklo X12CrNiMoV12-3 (1.4938) - Taljeno na zraku in pretaljeno s
taljivo elektrodo - Utrjeno in mehko žarjeno - Palice - De ≤ 150 mm - 900 MPa ≤ Rm
≤ 1 100 MPa
Aerospace series - Steel X12CrNiMoV12-3 (1.4938) - Air melted and consumable
electrode remelted - Hardened and tempered - Bars - De ≤ 150 mm - 900 MPa ≤ Rm ≤ 1
100 MPa
Luft- und Raumfahrt - Stahl X12CrNiMoV12-3 (1.4938) - Lufterschmolzen und mit
selbstverzehrender Elektrode umgeschmolzen - Gehärtet- und angelassen - Stangen -
De ≤ 150 mm - 900 MPa ≤ Rm ≤ 1 100 MPa
Série aérospatiale - Acier X12CrNiMoV12-3 (1.4938) - Élaboré à l'air et refondu à
l'électrode consommable - Trempé et revenu - Barres - De ≤ 150 mm - 900 MPa ≤ Rm ≤
1 100 MPa
Ta slovenski standard je istoveten z: EN 4825:2021
ICS:
49.025.10 Jekla Steels
77.140.60 Jeklene palice in drogovi Steel bars and rods
SIST EN 4825:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 4825:2021

---------------------- Page: 2 ----------------------
SIST EN 4825:2021


EN 4825
EUROPEAN STANDARD

NORME EUROPÉENNE

May 2021
EUROPÄISCHE NORM
ICS 49.025.10
English Version

Aerospace series - Steel X12CrNiMoV12-3 (1.4938) - Air
melted and consumable electrode remelted - Hardened
and tempered - Bars - De ≤ 150 mm - 900 MPa ≤ Rm ≤ 1
100 MPa
Série aérospatiale - Acier X12CrNiMoV12-3 (1.4938) - Luft- und Raumfahrt - Stahl X12CrNiMoV12-3 (1.4938)
Élaboré à l'air et refondu à l'électrode consommable - - Lufterschmolzen und mit selbstverzehrender
Elektrode umgeschmolzen - Gehärtet- und angelassen -
Trempé et revenu - Barres - De ≤ 150 mm - 900 MPa ≤
Stangen - De ≤ 150 mm - 900 MPa ≤ Rm ≤ 1 100 MPa
Rm ≤ 1 100 MPa
This European Standard was approved by CEN on 18 January 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4825:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 4825:2021
EN 4825:2021 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 9

2

---------------------- Page: 4 ----------------------
SIST EN 4825:2021
EN 4825:2021 (E)
European foreword
This document (EN 4825:2021) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this
document has received the approval of the National Associations and the Official Services of the
member countries of ASD, prior to its presentation to CEN.
This document shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by November 2021, and conflicting national standards shall be
withdrawn at the latest by November 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject
of patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this document: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Repu
...