iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

oSIST prEN IEC 80601-2-52:2024

(Main)

Medical electrical equipment - Part 2-52: Particular requirements for the basic safety and essential performance of medical beds

Medical electrical equipment - Part 2-52: Particular requirements for the basic safety and essential performance of medical beds

Appareil électromédicaux - Partie 2-52: Exigences particulières de sécurité de base et de performances essentielles des lits médicaux

Medicinska električna oprema - 2-52. del: Posebne zahteve za osnovno varnost in bistvene lastnosti medicinskih postelj

General Information

Status
Not Published
Public Enquiry End Date
23-May-2024
ICS
11.140 - Hospital equipment
Technical Committee
IEMO - Electrical equipment in medical practice
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
06-Mar-2024
Due Date
24-Jul-2024
Ref Project
prEN IEC 80601-2-52:2024 - Medical electrical equipment - Part 2-52: Particular requirements for the basic safety and essential performance of medical beds

Buy Standard

prEN IEC 80601-2-52:2024 - BARVEprEN IEC 80601-2-52:2024 - BARVE
PreviousNext
Draft
prEN IEC 80601-2-52:2024 - BARVE
English language
90 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN IEC 80601-2-52:2024
01-maj-2024
Medicinska električna oprema - 2-52. del: Posebne zahteve za osnovno varnost in
bistvene lastnosti medicinskih postelj
Medical electrical equipment - Part 2-52: Particular requirements for the basic safety and
essential performance of medical beds
Appareil électromédicaux - Partie 2-52: Exigences particulières de sécurité de base et de
performances essentielles des lits médicaux
Ta slovenski standard je istoveten z: prEN IEC 80601-2-52:2024
ICS:
11.140 Oprema bolnišnic Hospital equipment
oSIST prEN IEC 80601-2-52:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 80601-2-52:2024

---------------------- Page: 2 ----------------------
oSIST prEN IEC 80601-2-52:2024
62D/2114/CDV

COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 80601-2-52 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2024-03-01 2024-05-24
SUPERSEDES DOCUMENTS:
62D/1759A/CD, 62D/1782A/CC

IEC SC 62D : PARTICULAR MEDICAL EQUIPMENT, SOFTWARE, AND SYSTEMS
SECRETARIAT: SECRETARY:
United States of America Ms Ladan Bulookbashi
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:


Other TC/SCs are requested to indicate their interest, if any, in
this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which
they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some Countries”
clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for
submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).

TITLE:
Medical electrical equipment - Part 2-52: Particular requirements for the basic safety and essential
performance of medical beds

PROPOSED STABILITY DATE: 2030

NOTE FROM TC/SC OFFICERS:

Copyright © 2024 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.

---------------------- Page: 3 ----------------------
oSIST prEN IEC 80601-2-52:2024
62D/2114/CDV – 2 – IEC CDV 80601-2-52:2024

1 CONTENTS
2 FOREWORD . 5
3 INTRODUCTION . 8
4 201.1 Scope, object and related standards . 9
5 201.2 Normative references . 11
6 201.3 Terms and definitions . 11
7 201.4 General requirements . 15
8 201.5 General requirements for testing of ME EQUIPMENT . 15
9 201.6 Classification of ME EQUIPMENT and ME SYSTEMS . 17
10 201.7 ME EQUIPMENT identification, marking and documents . 18
11 201.8 Protection against electrical HAZARDS from ME EQUIPMENT . 24
12 201.9 Protection against MECHANICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS . 25
13 201.10 Protection against unwanted and excessive radiation HAZARDS . 50
14 201.11 Protection against excessive temperatures and other HAZARDS . 50
15 201.12 Accuracy of controls and instruments and protection against hazardous
16 outputs . 53
17 201.13 HAZARDOUS SITUATIONS and fault conditions .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 60601-2-35:2021/A1:2024(Amendment)
Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use (IEC 60601-2-35:2020/AMD1:2023)
EN IEC 60601-2-35:2021/A1:2024
  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60601-2-35:2021(Main)
Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use (IEC 60601-2-35:2020)
EN IEC 60601-2-35:2021

This part of 60601 International Standard applies to the BASIC SAFETY and ESSENTIAL
PERFORMANCE of HEATING DEVICES using BLANKETS, PADS or MATTRESSES in medical use, also
referred to as ME EQUIPMENT. HEATING DEVICES intended to prewarm a bed are included in the
scope of this document.
If a clause or subclause is specifically intended to be applicable to ME EQUIPMENT only, or to
ME SYSTEMS only, the title and content of that clause or subclause will say so. If that is not the
case, the clause or subclause applies both to ME EQUIPMENT and to ME SYSTEMS, as relevant.
If a clause or subclause is specifically intended to be applicable to a specifically defined type
of ME EQUIPMENT, as is the case with FORCED AIR DEVICES, then the title and content of that
clause or subclause will say so. If that is not the case, the clause or subclause applies both to
ME EQUIPMENT and to ME SYSTEMS, as relevant.
HAZARDS inherent in the intended physiological function of ME EQUIPMENT or ME SYSTEMS
within the scope of this document are not covered by specific requirements in this document,
except in 7.2.13 and 8.4.1 of the general standard.
NOTE See also 4.2 of the general standard.
This document does not apply to:
– HEATING DEVICES intended for physiotherapy;
– INFANT RADIANT WARMERS; for information, see IEC 60601-2-21 [1]2;
– INFANT INCUBATORS; for information, see IEC 60601-2-19 [2];
– INFANT TRANSPORT INCUBATORS, for information, see IEC 60601-2-20 [3];
– cooling devices.

  • Standard
    73 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    73 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60601-2-46:2020(Main)
Medical electrical equipment - Part 2-46: Particular requirements for the basic safety and essential performance of operating tables (IEC 60601-2-46:2016)
EN IEC 60601-2-46:2019

IEC 60601-2-46:2010 specifies safety requirements for operating tables, whether or not having electrical parts, including transporters, used for the transportation of the table top to or from the base or pedestal of an operating table with detachable table top. This second edition cancels and replaces the first edition published in 1998 and constitutes a technical revision. This edition of IEC 60601-2-46 was revised to align structurally with the 2005 edition of IEC 60601-1.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50637:2018(Main)
Medical electrical equipment - Particular requirements for the basic safety and essential performance of medical beds for children
EN 50637:2017

This Standard applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of MEDICAL BEDS, hereafter referred to as MEDICAL BEDS as defined in 201.3.218, intended for CHILDREN as defined in 201.3.207, and ADULTS with atypical anatomy (ADULTS ranging outside the definition for ADULTS in 201.3.201).
This standard applies to medical beds with nonadjustable and electrical / mechanical adjustable functions.
This Standard applies to MEDICAL BEDS with an internal length of up to 180 cm suitable to a body length of 155 cm.
NOTE 1   The limitation of 180 cm is in order to minimize the foreseeable misuse, of a parent sharing the bed with the child or that the bed will be used by an ADULT.
If a manufacturer wishes to make a bed that can be used by both a child and an ADULT, e.g. length of 180 cm or more, then it will fulfil both EN 60601-2-52 and this particular standard.
This Standard does not apply to MEDICAL BEDS intended for ADULTS as defined in 201.3.201 (covered by EN 60601-2-52).
This Standard does not apply to :
-   incubators covered by EN 60601-2-19 ;
-   beds for children, covered by EN 716-1 and EN 716-2 ;
-   cribs and cradles covered by EN 1130 (all parts) ;
-   bunk beds and high beds, covered by EN 747-1 and 747-2.
If a clause or subclause is specifically intended to be applicable to a MEDICAL BED only, or to ME SYSTEMS only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to MEDICAL BEDS and to ME SYSTEMS, as relevant.
HAZARDS inherent in the intended physiological function of MEDICAL BED or ME SYSTEMS within the scope of this standard are not covered by specific requirements in this standard except in 7.2.13 and 8.4.1 of EN 60601-1:2006.
NOTE 2   See also 4.2 of EN 60601-1:2006.
NOTE 3   Body length is measured from crown to sole.
1.2 Object
The object of this particular standard is to establish particular BASIC SAFETY and ESSENTIAL PERFORMANCE requirements and test methods for MEDICAL BEDS as defined in 201.3.218 intended for CHILDREN as defined in 201.3.207.
(...)

  • Standard
    89 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 80601-2-35:2010/A1:2017(Amendment)
Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use (IEC 80601-2-35:2009/A1:2016)
EN 80601-2-35:2009/A1:2016
  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60601-2-52:2010/A1:2015(Amendment)
Medical electrical equipment - Part 2-52: Particular requirements for basic safety and essential performance of medical beds
EN 60601-2-52:2010/A1:2015

IEC 60601-2-52:2009 applies to the basic safety and essential performance of medical beds intended for adults. This first edition cancels and replaces the first edition of IEC 60601-2-38, published in 1996, and its Amendment 1 (1999). This edition constitutes a technical revision. IEC 60601-2-52:2009 is the realization of much work in alignment, and scope adjustment between IEC 60601-2-38, EN 1970, and the third edition of IEC 60601-1.

  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 80601-2-35:2010/AC:2015(Corrigendum)
Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use
EN 80601-2-35:2009/AC:2015
  • Corrigendum
    1 page
    English and French language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 80601-2-35:2010/A11:2012(Amendment)
Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use
EN 80601-2-35:2009/A11:2011

This International Standard applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of HEATING DEVICES using BLANKETS, PADS or MATTRESSES in medical use, also referred to as ME EQUIPMENT. HEATING DEVICES intended to prewarm a bed are included in the scope of this International Standard. If a clause or subclause is specifically intended to be applicable to ME EQUIPMENT only, or to ME SYSTEMS only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to ME EQUIPMENT and to ME SYSTEMS, as relevant. If a clause or subclause is specifically intended to apply to a specifically defined type of ME EQUIPMENT, as is the case with FORCED AIR DEVICES, then the clause or subclause is entitled as such. Clauses or subclauses that apply to all types of ME EQUIPMENT within the scope of this standard are not specifically entitled. HAZARDS inherent in the intended physiological function of ME EQUIPMENT or ME SYSTEMS within the scope of this standard are not covered by specific requirements in this standard except in 7.2.13 and 8.4.1 of the general standard.

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60601-2-52:2010/AC:2011(Main)
Medical electrical equipment - Part 2-52: Particular requirements for basic safety and essential performance of medical beds
EN 60601-2-52:2010/AC:2011

EC 60601-2-52:2009 applies to the basic safety and essential performance of medical beds intended for adults. This first edition cancels and replaces the first edition of IEC 60601-2-38, published in 1996, and its Amendment 1 (1999). This edition constitutes a technical revision. IEC 60601-2-52:2009 is the realization of much work in alignment, and scope adjustment between IEC 60601-2-38, EN 1970, and the third edition of IEC 60601-1.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 80601-2-35:2010(Main)
Medical electrical equipment - Part 2-35: Particular requirements for basic safety and essential performance of blankets, pads and mattresses, intended for heating in medical use (IEC 80601-2-35:2009)
EN 80601-2-35:2009

This International Standard applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of HEATING DEVICES using BLANKETS, PADS or MATTRESSES in medical use, also referred to as ME EQUIPMENT. HEATING DEVICES intended to prewarm a bed are included in the scope of this International Standard. If a clause or subclause is specifically intended to be applicable to ME EQUIPMENT only, or to ME SYSTEMS only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to ME EQUIPMENT and to ME SYSTEMS, as relevant. If a clause or subclause is specifically intended to apply to a specifically defined type of ME EQUIPMENT, as is the case with FORCED AIR DEVICES, then the clause or subclause is entitled as such. Clauses or subclauses that apply to all types of ME EQUIPMENT within the scope of this standard are not specifically entitled. HAZARDS inherent in the intended physiological function of ME EQUIPMENT or ME SYSTEMS within the scope of this standard are not covered by specific requirements in this standard except in 7.2.13 and 8.4.1 of the general standard.

  • Standard
    72 pages
    English language
    sale 10% off
    e-Library read for
    1 day