SIST EN 1467:2012
(Main)Natural stone - Rough blocks - Requirements
Natural stone - Rough blocks - Requirements
This European Standard specifies requirements for rough blocks of natural stone from which products for use in building or commemorative stones and other similar applications are made.
It does not cover artificially agglomerated stony material nor installation.
Natursteine - Rohblöcke - Anforderungen
Diese Europäische Norm legt Anforderungen an Rohblöcke aus Naturwerkstein fest, aus denen Erzeugnisse zur Anwendung im Bauwesen oder für Denkmale oder andere ähnliche Anwendungen hergestellt werden. Sie gilt weder für künstlich hergestelltes Gesteinsmaterial noch für die Verlegung.
Pierres naturelles - Blocs bruts - Exigences
La présente Norme européenne définit les spécifications relatives aux blocs bruts de pierre naturelle à partir
desquels sont faits les produits utilisés pour le bâtiment, les monuments commémoratifs et autres applications
similaires.
Elle ne couvre pas les pierres artificielles agglomérées ni la mise en oeuvre.
Naravni kamen - Surovi bloki - Zahteve
Ta evropski standard določa zahteve za surove bloke iz naravnega kamna, iz katerih so izdelani izdelki, ki se uporabljajo na stavbah, spomenikih in podobno.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Naravni kamen - Surovi bloki - ZahteveNatursteine - Rohblöcke - AnforderungenPierres naturelles - Blocs bruts - ExigencesNatural stone - Rough blocks - Requirements91.100.15Mineralni materiali in izdelkiMineral materials and productsICS:Ta slovenski standard je istoveten z:EN 1467:2012SIST EN 1467:2012en,fr,de01-julij-2012SIST EN 1467:2012SLOVENSKI
STANDARDSIST EN 1467:20041DGRPHãþD
SIST EN 1467:2012
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1467
April 2012 ICS 73.020; 91.100.15 Supersedes EN 1467:2003English Version
Natural stone - Rough blocks - Requirements
Pierres naturelles - Blocs bruts - Exigences
Natursteine - Rohblöcke - Anforderungen This European Standard was approved by CEN on 9 March 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1467:2012: ESIST EN 1467:2012
EN 1467:2012 (E) 2 Contents Page Foreword .31 Scope .52 Normative references .53 Terms and definitions .54 Requirements .74.1 Requirements for geometric characteristics .74.1.1 Measurement criteria .74.1.2 Requirements on shape .84.1.3 Requirements for volume .84.1.4 Requirements for mass .84.2 Requirements of natural stone for rough blocks .84.2.1 General .84.2.2 Denomination .84.2.3 Visual appearance .84.2.4 Apparent density and open porosity .94.2.5 Flexural strength .94.2.6 Other requirements.95 Marking .96 Evaluation of conformity and factory production control .96.1 Evaluation of conformity .96.2 Initial type testing . 106.3 Factory production control . 10Annex A (informative)
Sampling . 12A.1 General . 12A.2 Principles of sampling . 12A.3 Taking bulk samples . 12A.4 Preparing a sampling plan . 12A.5 Sampling apparatus . 13A.6 Sampling methods . 13A.6.1 General . 13A.6.2 Sampling from quarries . 13A.6.3 Sampling from plants . 14A.6.4 Sampling from buildings . 14A.7 Marking, packaging and dispatch of the samples . 14A.8 Sampling report . 14Bibliography . 16 SIST EN 1467:2012
EN 1467:2012 (E) 3 Foreword This document (EN 1467:2012) has been prepared by Technical Committee CEN/TC 246 “Natural stones”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2012, and conflicting national standards shall be withdrawn at the latest by October 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1467:2003. This European Standard is one of a series of standards for requirements of natural stone products which includes the following: EN 1467, Natural stone — Rough blocks — Requirements EN 1468, Natural stone — Rough slabs — Requirements EN 1469, Natural stone products — Slabs for cladding — Requirements EN 12057, Natural stone products — Modular tiles — Requirements EN 12058, Natural stone products — Slabs for floors and stairs — Requirements EN 12059, Natural stone products — Dimensional stone work — Requirements Other standards on natural stone are produced by a) CEN/TC 178
1) EN 1341, Slabs of natural stone for external paving — Requirements and test methods 2) EN 1342, Setts of natural stone for external paving — Requirements and test methods 3) EN 1343, Kerbs of natural stone for external paving — Requirements and test methods b) CEN/TC 128 1) EN 12326-1, Slate and stone products for discontinuous roofing and cladding — Part 1: Product specification 2) EN 12326-2, Slate and stone products for discontinuous roofing and cladding — Part 2: Methods of test for slate and carbonate slate c) CEN/TC 125 1) EN 771-6, Specification for masonry units — Part 6: Natural stone masonry units Other standards are relevant to stone aggregates for concrete, roads, railways and armourstone. SIST EN 1467:2012
EN 1467:2012 (E) 4 According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 1467:2012
EN 1467:2012 (E) 5 1 Scope This European Standard specifies requirements for rough blocks of natural stone from which products for use in building or commemorative stones and other similar applications are made. It does not cover artificially agglomerated stony material nor installation. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1936, Natural stone test methods — Determination of real density and apparent density, and of total and open porosity EN 12372, Natural stone test methods — Determination of flexural strength under concentrated load EN 12407, Natural stone test methods — Petrographic examination EN 12440, Natural stone — Denomination criteria EN 12670:2001, Natural stone — Terminology EN 13161, Natural stone test methods — Determination of flexural strength under constant moment EN 13373, Natural stone test methods — Determination of geometric characteristics on units NOTE Besides the European Standards for test methods mentioned in this clause, there exist further standards which can be used for scientific examinations, but which are not relevant for the application in practice according to this European Standard. 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 12670:2001 and the following apply. 3.1 commercial size of a rough block size which is obtained by reducing each net dimension by 0,05 m (see Figure 1) SIST EN 1467:2012
EN 1467:2012 (E) 6 Dimensions in metres
Key _._._._ gross size --------- commercial size Figure 1 — Gross sizes, commercial sizes of a rough block 3.2 dimensions of a rough block length l, width b and height h are the dimensions of a squared rough block. They are given in the stated sequence in meters to two decimals places 3.2.1 length l greater side in a natural layer where appropriate 3.2.2 width b smaller side in the natural layer or at right angles to length 3.2.3 height h side at right angles to the natural layer (see Figure 2) or to the plane containing length l and width b SIST EN 1467:2012
EN 1467:2012 (E) 7
Key 1 natural layer Figure 2 — Dimensions of a rough block 3.3 gross size of the rough block size defined by the lengths of the edges of the smallest parallelepiped circumscribed to a rough block (see Figure 1) 3.4 net size of a rough block size which is determined in the following manner: Establish the greatest inscribed parallelepiped block which shall not contain any sides without right angles nor contain drill holes and other holes. The resulting figure is the net size 3.5 rough block basis of the usable stone consisting of rocks obtained directly from quarries or erratics with no processing whatsoever except extraction and shaping by cutting or splitting 3.6 rough block of specific size squared rough block with certain given dimensions 3.7 shapeless rough block rough block without regular shape and size 3.8 squared rough block rough block which corresponds approximately to a regular parallelepiped Note 1 to entry: Normally the ratio obtainable by dividing the mass of the squared rough block by the apparent density should be bigger than 80 % of the gross size. If such a ratio is equal to or less than 80 %, the block is considered a shapeless rough block. 4 Requirements 4.1 Requirements for geometric characteristics
4.1.1 Measurement criteria All measurements shall be carried out in accordance with EN 13373 and indicated in metres to two decimals places. SIST EN 1467:2012
EN 1467:2012 (E) 8 4.1.2 Requirements on shape The six sides of squared rough block shall be approximately flat, right-angled and parallel, and correspond to the shape of a parallelepiped. Local deviations from the parallelepiped shape are permitted. Shapeless rough blocks for commercial purposes are only measured by mass, (see 4.1.4); gross size shall be provided upon request. Rough blocks of specific size shall have dimensions not lower than the minimum values and not greater than the maximum values agreed between the purchaser and supplier. 4.1.3 Requirements for volume The volume of a rough block shall be stated in cubic metres to three decimals places. The volume may be calculated by dividing the mass of the block by the apparent density. 4.1
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.