SIST EN 13880-9:2004

Hot applied joint sealants - Part 9: Test method for the determination of compatibility with asphalt pavements

This European Standard describes a method for determining the compatibility of hot applied joint sealants applied to a saw asphalt joint slot

Heiß verarbeitbare Fugenmassen - Teil 9: Prüfverfahren zur Bestimmung der Verträglichkeit mit Asphalten

Diese Europäische Norm beschreibt ein Verfahren zur Bestimmung der Verträglichkeit von heiß verarbeit-baren Fugenmassen mit Asphalt.

Produits de scellement de joints appliqués a chaud - Partie 9 : Méthode d'essai pour la détermination de la compatibilité avec les revetements bitumineux

Cette Norme européenne décrit une méthode pour la détermination de la compatibilité des produits de scellement de joints appliqués a chaud sur une entaille pratiquée au moyen d'une scie dans un bloc d'enrobé.

Toplo nanosljive tesnilne mase za stike – 9. del: Preskusna metoda za ugotavljanje združljivosti z asfaltnimi vozišči

General Information

• Status: Published
• Publication Date: 31-May-2004
• ICS: 91.100.50 - Binders. Sealing materials
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CES - Roads
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Jun-2004
• Due Date: 01-Jun-2004
• Completion Date: 01-Jun-2004
• Directive: 89/106/EEC - Construction products
• Mandate: M/124 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on road construction products
• Ref Project: EN 13880-9:2003 - Hot applied joint sealants - Part 9: Test method for the determination of compatibility with asphalt pavements

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Heiß verarbeitbare Fugenmassen - Teil 9: Prüfverfahren zur Bestimmung der Verträglichkeit mit AsphaltenProduits de scellement de joints appliqués a chaud - Partie 9 : Méthode d'essai pour la détermination de la compatibilité avec les revetements bitumineuxHot applied joint sealants - Part 9: Test method for the determination of compatibility with asphalt pavements93.080.20Materiali za gradnjo cestRoad construction materials91.100.50Veziva. Tesnilni materialiBinders. Sealing materialsICS:Ta slovenski standard je istoveten z:EN 13880-9:2003SIST EN 13880-9:2004en01-junij-2004SIST EN 13880-9:2004SLOVENSKI
STANDARD



SIST EN 13880-9:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13880-9June 2003ICS 93.080.20English versionHot applied joint sealants - Part 9: Test method for thedetermination of compatibility with asphalt pavementsProduits de scellement de joints appliqués à chaud - Partie9: Méthode d'essai pour la détermination de la compatibilitéavec les revêtements bitumineuxHeiß verarbeitbare Fugenmassen - Teil 9: Prüfverfahrenzur Bestimmung der Verträglichkeit mit AsphaltenThis European Standard was approved by CEN on 25 March 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13880-9:2003 ESIST EN 13880-9:2004



EN 13880-9:2003 (E)2ContentspageForeword.31Scope.42Normative references.43Principle.44Apparatus.45Preparation and conditioning of the test specimens.46Procedure.57Expression of results.58Precision.59Test report.5Annex A (informative)
Determination of asphalt compatibility after heat degradation.6A.1Principle.6A.2Apparatus.6A.3Preparation and conditioning of test specimens.6SIST EN 13880-9:2004



EN 13880-9:2003 (E)3ForewordThis document (EN 13880-9:2003) has been prepared by Technical Committee CEN/TC 227 "Road materials", thesecretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by December 2003, and conflicting national standards shall be withdrawn at the latestby March 2005.This European Standard is one of a series of standards as listed below:prEN 13880-1Hot applied joint sealants — Part 1: Test method for the determination of density at 25 °CprEN 13880-2Hot applied joint sealants — Part 2: Test method for the determination of cone penetration at25 °CEN 13880-3Hot applied joint sealants — Part 3: Test method for the determination of penetration andrecovery (resilience)EN 13880-4Hot applied joint sealants — Part 4: Test method for the determination of heat resistance —Change in penetration valueprEN 13880-5Hot applied joint sealants — Part 5: Test method for the determination of flow resistanceprEN 13880-6Hot applied joint sealants — Part 6: Test method for the preparation of samples for testingprEN 13880-7Hot applied joint sealants — Part 7: Function testing of joint sealantsprEN 1388
...