SIST EN 14406:2004

Products and systems for the protection and repair of concrete structures - Test methods - Determination of the expansion ratio and expansion evolution

This document describes a test method to determine the expansion ratio and rate of injection products intended for ductile filling of wet cracks, voids and interstices.

Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Prüfverfahren - Bestimmung des Ausdehnungsverhältnisses und der Ausdehnungsentwicklung

Diese Europäische Norm beschreibt ein Prüfverfahren zur Bestimmung des Ausdehnungsverhältnisses und der Ausdehnungsentwicklung von Rissfüllstoffen zum dehnbaren Verfüllen von Rissen, Hohlräumen und Fehl-stellen.

Produits et systemes de protection et de réparation des structures en béton - Méthodes d'essai - Détermination du rapport d'expansion et de l'évolution de l'expansion

Le présent document décrit une méthode d'essai pour déterminer le rapport et la vitesse d'expansion des produits d'injection destinés au remplissage ductile des fissures humides, des vides et des interstices.

Proizvodi in sistemi za zaščito in popravilo betonskih konstrukcij – Preskusne metode – Določevanje stopnje in razvoja nabrekanja in hitrosti nabrekanja injekcijske mase

General Information

• Status: Published
• Publication Date: 30-Nov-2004
• ICS: 91.080.40 - Concrete structures
• Technical Committee: BBB - Concrete, reinforced concrete and prestressed concrete
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Dec-2004
• Due Date: 01-Dec-2004
• Completion Date: 01-Dec-2004
• Directive: 89/106/EEC - Construction products
• Ref Project: EN 14406:2004 - Products and systems for the protection and repair of concrete structures - Test methods - Determination of the expansion ratio and expansion evolution

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.EUHNDQMDProdukte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Prüfverfahren - Bestimmung des Ausdehnungsverhältnisses und der AusdehnungsentwicklungProduits et systemes de protection et de réparation des structures en béton - Méthodes d'essai - Détermination du rapport d'expansion et de l'évolution de l'expansionProducts and systems for the protection and repair of concrete structures - Test methods - Determination of the expansion ratio and expansion evolution91.080.40Betonske konstrukcijeConcrete structuresICS:Ta slovenski standard je istoveten z:EN 14406:2004SIST EN 14406:2004en01-december-2004SIST EN 14406:2004SLOVENSKI
STANDARD



SIST EN 14406:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14406September 2004ICS 91.080.40 English versionProducts and systems for the protection and repair of concretestructures - Test methods - Determination of the expansion ratioand expansion evolutionProduits et systèmes pour la protection et la réparation desstructures en béton - Méthodes d'essai - Détermination durapport d'expansion et de l'évolution de l'expansionProdukte und Systeme für den Schutz und dieInstandsetzung von Betontragwerken - Prüfverfahren -Bestimmung des Ausdehnungsverhältnisses und derAusdehnungsentwicklungThis European Standard was approved by CEN on 16 April 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14406:2004: ESIST EN 14406:2004



EN 14406:2004 (E)
2 Contents page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Test principle.4 5 Apparatus.5 6 Sampling and preparation.5 7 Procedure.5 8 Expression of results.6 9 Report.7
SIST EN 14406:2004



EN 14406:2004 (E) 3 Foreword This document (EN 14406:2004) has been prepared by Technical Committee CEN/TC 104 “Concrete and related products”, the secretariat of which is held by DIN. It has been drafted by Sub-Committee 8 "Products and systems for the protection and repair of concrete structures" (Secretariat AFNOR). This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2005, and conflicting national standards shall be withdrawn at the latest by March 2005.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 14406:2004



EN 14406:2004 (E)
4 1 Scope This document describes a test method to determine the expansion ratio and rate of injection products intended for ductile filling of wet cracks, voids and interstices. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1504-1:1998, Products and systems for the protection and repair of concrete structures - Definitions,requirements, quality control
...