SIST EN 61347-2-11:2002/A1:2019

Lamp controlgear - Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires (IEC 61347-2-11:2001/A1:2017)

NEXT Action: CCMC to make available
2019-01-21 PeC: "Compliant" for LVD, sent to BT for integration (approved=D162/C043)
2018-11-21 PeC: sent to BT to keep ratification pending in order to fix harmonization (approved=D161/C073)
2018-11-12 PeC: submitted for HAS assessment
2017-07-31 - Cannot allocate for publication due to negative assessment from Consultant.

Geräte für Lampen - Teil 2-11: Besondere Anforderungen an elektronische Module für Leuchten (IEC 61347-2-11:2001/A1:2017)

Appareillages de lampes - Partie 2-11: Prescriptions particulières pour circuits électroniques divers utilisés avec les luminaires (IEC 61347-2-11:2001/A1:2017)

Krmilne stikalne naprave za sijalke - 2-11. del: Posebne zahteve za različne elektronske sisteme v terminalih - Dopolnilo A1 (IEC 61347-2-11:2001/A1:2017)

General Information

• Status: Published
• Publication Date: 04-Jul-2019
• ICS: 29.130.01 - Switchgear and controlgear in general
• ICS: 29.140.99 - Other standards related to lamps
• Technical Committee: IESV - Lamps and related equipment
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 02-Jul-2019
• Due Date: 06-Sep-2019
• Completion Date: 05-Jul-2019
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Directive: 2014/53/EU - Directive 2014/53/EU of The European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC
• Ref Project: EN 61347-2-11:2001/A1:2019 - Lamp controlgear - Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires

Relations

• Amends: SIST EN 61347-2-11:2002 - Lamp controlgear - Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires
• Effective Date: 19-Jul-2016
• Revised: oSIST prEN IEC 61347-2-11:2023 - Controlgear for electric light sources - Safety - Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires
• Effective Date: 28-Jul-2020

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61347-2-11:2002/A1:2019
01-september-2019
Krmilne stikalne naprave za sijalke - 2-11. del: Posebne zahteve za različne
elektronske sisteme v terminalih - Dopolnilo A1 (IEC 61347-2-11:2001/A1:2017)
Lamp controlgear - Part 2-11: Particular requirements for miscellaneous electronic
circuits used with luminaires (IEC 61347-2-11:2001/A1:2017)
Geräte für Lampen - Teil 2-11: Besondere Anforderungen an elektronische Module für
Leuchten (IEC 61347-2-11:2001/A1:2017)
Appareillages de lampes - Partie 2-11: Prescriptions particulières pour circuits
électroniques divers utilisés avec les luminaires (IEC 61347-2-11:2001/A1:2017)
Ta slovenski standard je istoveten z: EN 61347-2-11:2001/A1:2019
ICS:
29.130.01 Stikalne in krmilne naprave Switchgear and controlgear
na splošno in general
29.140.99 Drugi standardi v zvezi z Other standards related to
žarnicami lamps
SIST EN 61347-2-11:2002/A1:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61347-2-11:2002/A1:2019

---------------------- Page: 2 ----------------------

SIST EN 61347-2-11:2002/A1:2019


EUROPEAN STANDARD EN 61347-2-11:2001/A1

NORME EUROPÉENNE

EUROPÄISCHE NORM
June 2019
ICS 29.140.99

English Version
Lamp controlgear - Part 2-11: Particular requirements for
miscellaneous electronic circuits used with luminaires
(IEC 61347-2-11:2001/A1:2017)
Appareillages de lampes - Partie 2-11: Prescriptions Geräte für Lampen - Teil 2-11: Besondere Anforderungen
particulières pour circuits électroniques divers utilisés avec an elektronische Module für Leuchten
les luminaires (IEC 61347-2-11:2001/A1:2017)
(IEC 61347-2-11:2001/A1:2017)
This amendment A1 modifies the European Standard EN 61347-2-11:2001; it was approved by CENELEC on 2017-08-17. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 61347-2-11:2001/A1:2019 E

---------------------- Page: 3 ----------------------

SIST EN 61347-2-11:2002/A1:2019
EN 61347-2-11:2001/A1:2019 (E)
European foreword
The text of document (34C/1328/FDIS), future IEC 61347-2-11:2001/A1, prepared by SC 34C
"Auxiliaries for lamps" of IEC/TC 34 "Lamps and related equipment" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 61347-2-11:2001/A1:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at (dop) 2019-12-14
national level by publication of an identical national
standard or by endorsement
• latest date by which the national standards conflicting with (dow) 2022-06-14
the document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this
document.
Endorsement notice
The text of the International Standard IEC 61347-2-11:2001/A1:2017 was approved by CENELEC as
a European Standard without any modification.
2

---------------------- Page: 4 ----------------------

SIST EN 61347-2-11:2002/A1:2019
EN 61347-2-11:2001/A1:2019 (D)
Annex ZZ
(informative)

Relationship between this European Standard and the safety objectives of
Directive 2014/35/EU [2014 OJ L96] aimed to be covered
This European Standard has been prepare
...