SIST EN IEC 61347-2-1:2024
(Main)Controlgear for electric light sources - Safety - Part 2-1: Particular requirements - Starting devices (other than glow starters) (IEC 61347-2-1:2024)
Controlgear for electric light sources - Safety - Part 2-1: Particular requirements - Starting devices (other than glow starters) (IEC 61347-2-1:2024)
IEC 61347-2-1:2024 is available as IEC 61347-2-1:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61347-2-1:2024 specifies safety requirements for starting devices (starters other than glow starters and ignitors) for fluorescent and other discharge lamps for use on AC supplies up to 1 000 V at 50 Hz or 60 Hz which produce starting pulses not greater than 100 kV and which are used in combination with lamps and controlgear covered in IEC 60081, IEC 60188, IEC 60192, IEC 60662, IEC 60901, IEC 61167, IEC 61195, IEC 61199, IEC 61347-2-8 and IEC 61347-2-9.
This second edition cancels and replaces the first edition published in 2000, Amendment 1:2005 and Amendment 2:2013. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) update of normative references, introducing dated references where appropriate;
b) clarification of sample item numbers;
c) alignment of clause numbers with those of IEC 61347-1;
d) renumbering of Clause 15 and Clause 16.
Betriebsgeräte für elektrische Lichtquellen - Sicherheit - Teil 2-1: Besondere Anforderungen - Startgeräte (andere als Glimmstarter) (IEC 61347-2-1:2024)
Appareillages de commande pour les sources de lumière électriques - Sécurité - Partie 2-1: Exigences particulières - Dispositifs d'amorçage (autres que starters à lueur) (IEC 61347-2-1:2024)
IEC 61347-2-1:2024 est disponible sous forme de IEC 61347-2-1:2024 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.
L'IEC 61347-2-1:2024 spécifie les exigences de sécurité des dispositifs d'amorçage (starters autres que starters à lueur et amorceurs) pour lampes fluorescentes et autres lampes à décharge qui sont destinés à être utilisés avec des alimentations jusqu'à 1 000 V en courant alternatif à 50 Hz ou 60 Hz qui produisent des impulsions d'amorçage inférieures ou égales à 100 kV et qui sont associés aux lampes et appareillages spécifiés dans l'IEC 60081, l'IEC 60188, l'IEC 60192, l'IEC 60662, l'IEC 60901, l'IEC 61167, l'IEC 61195, l'IEC 61199, l'IEC 61347-2-8 et l'IEC 61347-2-9.
Cette seconde édition annule et remplace la première édition parue en 2000, l'Amendement 1:2005 et l'Amendement 2:2013. Cette édition constitue une révision technique.
Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) mise à jour des références normatives, avec ajout de références datées le cas échéant;
b) clarification des numéros d'entités d'échantillonnage;
c) alignement des numéros d'articles sur ceux de l'IEC 61347-1;
d) renumérotation de l'Article 15 et de l'Article 16.
Stikalne naprave za sijalke - Varnost - 2-1. del: Posebne zahteve - Vžigne naprave (razen tlivnih starterjev) (IEC 61347-2-1:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2024
Stikalne naprave za sijalke - Varnost - 2-1. del: Posebne zahteve - Vžigne naprave
(razen tlivnih starterjev) (IEC 61347-2-1:2024)
Controlgear for electric light sources - Safety - Part 2-1: Particular requirements -
Starting devices (other than glow starters) (IEC 61347-2-1:2024)
Betriebsgeräte für elektrische Lichtquellen - Sicherheit - Teil 2-1: Besondere
Anforderungen - Startgeräte (andere als Glimmstarter) (IEC 61347-2-1:2024)
Appareillages de commande pour les sources de lumière électriques - Sécurité - Partie 2
-1: Exigences particulières - Dispositifs d'amorçage (autres que starters à lueur) (IEC
61347-2-1:2024)
Ta slovenski standard je istoveten z: EN IEC 61347-2-1:2024
ICS:
29.130.01 Stikalne in krmilne naprave Switchgear and controlgear
na splošno in general
29.140.99 Drugi standardi v zvezi z Other standards related to
žarnicami lamps
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 61347-2-1
NORME EUROPÉENNE
EUROPÄISCHE NORM June 2024
ICS 29.140.99 Supersedes EN 61347-2-1:2001;
EN 61347-2-1:2001/corrigendum Jul. 2003;
EN 61347-2-1:2001/A1:2006;
EN 61347-2-1:2001/A1:2006/corrigendum Nov. 2006;
EN 61347-2-1:2001/corrigendum Dec. 2010;
EN 61347-2-1:2001/A2:2014
English Version
Controlgear for electric light sources - Safety - Part 2-1:
Particular requirements - Starting devices (other than glow
starters)
(IEC 61347-2-1:2024)
Appareillages de commande pour les sources de lumière Betriebsgeräte für elektrische Lichtquellen - Sicherheit - Teil
électriques - Sécurité - Partie 2-1: Exigences particulières - 2-1: Besondere Anforderungen - Startgeräte (andere als
Dispositifs d'amorçage (autres que starters à lueur) Glimmstarter)
(IEC 61347-2-1:2024) (IEC 61347-2-1:2024)
This European Standard was approved by CENELEC on 2024-06-18. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61347-2-1:2024 E
European foreword
The text of document 34C/1582/CDV, future edition 2 of IEC 61347-2-1, prepared by SC 34C
"Auxiliaries for lamps" of IEC/TC 34 "Lighting" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN IEC 61347-2-1:2024.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2025-03-18
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-06-18
document have to be withdrawn
This document supersedes EN 61347-2-1:2001 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document is read in conjunction with EN 61347-1:2015 and EN 61347-1:2015/A1:2021.
This document has been prepared under a standardization request addressed to CENELEC by the
European Commission. The Standing Committee of the EFTA States subsequently approves these
requests for its Member States.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61347-2-1:2024 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 60188 NOTE Approved as EN 60188
IEC 60192 NOTE Approved as EN 60192
IEC 60662 NOTE Approved as EN 60662
IEC 60927 NOTE Approved as EN 60927
IEC 61167 NOTE Approved as EN 61167
IEC 61195 NOTE Approved as EN 61195
IEC 61199 NOTE Approved as EN 61199
IEC 61347-2-1:2000 NOTE Approved as EN 61347-2-1:2001 (not modified)
IEC 61347-2-1:2000/A1:2005 NOTE Approved as EN 61347-2-1:2001/A1:2006 (not modified)
IEC 61347-2-1:2000/A2:2013 NOTE Approved as EN 61347-2-1:2001/A2:2014 (not modified)
IEC 61347-2-8 NOTE Approved as EN 61347-2-8
IEC 61347-2-9 NOTE Approved as EN 61347-2-9
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 60052 2002 Voltage measurement by means of EN 60052 2002
standard air gaps
IEC 60068-2-75 2014 Environmental testing - Part 2-75: Tests - EN 60068-2-75 2014
Test Eh: Hammer tests
IEC 60081 - Double-capped fluorescent lamps - EN 60081 -
Performance specifications
IEC 60155 1993 Glow-starters for fluorescent lamps EN 60155 1995
+ A1 1995 + A1 1995
+ A2 2006 + A2 2007
1 1
IEC 60255-8 1990 Electrical relays -- Part 8: Thermal EN 60255-8 1998
electrical relays
IEC 60598 series Luminaires EN IEC 60598 series
IEC 60598-1 2020 Luminaires - Part 1: General requirements EN IEC 60598-1 2021
and tests
IEC 60901 - Single-capped fluorescent lamps - EN 60901 -
Performance specifications
IEC 61347-1 2015 Lamp controlgear - Part 1: General and EN 61347-1 2015
safety requirements
+ A1 2017 + A1 2021
ISO 3864 series Graphical symbols - Safety colours and - series
safety signs
Withdrawn.
IEC 61347-2-1 ®
Edition 2.0 2024-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Controlgear for electric light sources – Safety –
Part 2-1: Particular requirements – Starting devices (other than glow starters)
Appareillages de commande pour les sources de lumière électriques – Sécurité –
Partie 2-1: Exigences particulières – Dispositifs d'amorçage (autres que starters
à lueur)
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.140.99 ISBN 978-2-8322-8840-5
– 2 – IEC 61347-2-1:2024 © IEC 2024
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 8
4 General requirements . 9
5 General notes on tests . 9
6 Classification . 9
7 Marking . 10
7.1 Marking and information . 10
7.1.1 Mandatory marking . 10
7.1.2 Information to be provided . 10
7.2 Durability and legibility . 10
8 Terminals . 10
9 Earthing . 10
10 Protection against accidental contact with live parts . 10
11 Moisture resistance and insulation . 11
12 Electric strength . 11
13 Thermal endurance test for windings of ballasts . 11
14 Fault conditions . 11
15 Pulse voltage of ignitors . 12
16 Heating of built-in and independent starting devices . 14
16.1 General . 14
16.2 Normal operation . 14
16.2.1 General . 14
16.2.2 Normal operation of built-in starting devices . 14
16.2.3 Normal operation of independent starting devices . 15
16.3 Abnormal operation . 15
16.3.1 Abnormal operation of built-in ignitors. 15
16.3.2 Abnormal operation of built-in starters . 16
16.3.3 Abnormal operation of independent starting devices . 16
17 Mechanical strength . 17
18 Construction . 18
19 Creepage distances and clearances . 18
20 Screws, current-carrying parts and connections . 18
21 Resistance to heat, fire and tracking . 19
22 Resistance to corrosion . 19
23 Applicable annexes of IEC 61347-1 . 19
Annex A (normative) Mechanical strength testing . 20
A.1 Replaceable starting devices and accessible components over 100 g . 20
A.2 Replaceable starting devices and accessible components up to 100 g . 20
Annex B (informative) Precautions to be observed when measuring with sphere-gaps . 22
B.1 General . 22
B.2 Sphere-gap . 22
IEC 61347-2-1:2024 © IEC 2024 – 3 –
B.3 Breakdown gap distance . 22
B.4 Duty cycle of the ignitor . 22
B.5 End of test . 22
Annex C (informative) Schedu
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.