SIST EN IEC 62813:2025
(Main)Lithium ion capacitors for use in electric and electronic equipment - Test methods for electrical characteristics (IEC 62813:2025)
Lithium ion capacitors for use in electric and electronic equipment - Test methods for electrical characteristics (IEC 62813:2025)
IEC 62813:2025 specifies the electrical characteristics (capacitance, internal resistance, discharge accumulated electric energy, and voltage maintenance rate) test methods of lithium-ion capacitors (LIC) for use in electric and electronic equipment.
This edition includes the following significant technical changes with respect to the previous edition:
a) The document has been restructured to comply with the ISO/IEC Directives, Part 2.
Lithium-Ionen-Kondensatoren zur Verwendung in elektrischen und elektronischen Geräten - Prüfverfahren für die elektrischen Kennwerte (IEC 62813:2025)
Condensateurs au lithium-ion destinés à être utilisés dans les équipements électriques et électroniques - Méthodes d'essai relatives aux caractéristiques électriques (IEC 62813:2025)
L'IEC 62813:2025 spécifie les méthodes d’essai applicables aux caractéristiques électriques (capacité, résistance interne, énergie électrique cumulée de décharge et taux de maintien de la tension) des condensateurs au lithium-ion (LIC – Lithium‑Ion Capacitor) destinés à être utilisés dans les équipements électriques et électroniques.
Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente:
a) le document a été restructuré pour être conforme aux Directives ISO/IEC, Partie 2.
Litij-ionski kondenzatorji za električno in elektronsko opremo - Metode za preskušanje električnih karakteristik (IEC 62813:2025)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2025
Litij-ionski kondenzatorji za električno in elektronsko opremo - Metode za
preskušanje električnih karakteristik (IEC 62813:2025)
Lithium ion capacitors for use in electric and electronic equipment - Test methods for
electrical characteristics (IEC 62813:2025)
Lithium-Ionen-Kondensatoren zur Verwendung in elektrischen und elektronischen
Geräten - Prüfverfahren für die elektrischen Kennwerte (IEC 62813:2025)
Condensateurs au lithium-ion destinés à être utilisés dans les équipements électriques
et électroniques - Méthodes d'essai relatives aux caractéristiques électriques (IEC
62813:2025)
Ta slovenski standard je istoveten z: EN IEC 62813:2025
ICS:
31.060.99 Drugi kondenzatorji Other capacitors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 62813
NORME EUROPÉENNE
EUROPÄISCHE NORM February 2025
ICS 31.060.99 Supersedes EN 62813:2015
English Version
Lithium ion capacitors for use in electric and electronic
equipment - Test methods for electrical characteristics
(IEC 62813:2025)
Condensateurs au lithium-ion destinés à être utilisés dans Lithium-Ionen-Kondensatoren zur Verwendung in
les équipements électriques et électroniques - Méthodes elektrischen und elektronischen Geräten - Prüfverfahren für
d'essai relatives aux caractéristiques électriques die elektrischen Kennwerte
(IEC 62813:2025) (IEC 62813:2025)
This European Standard was approved by CENELEC on 2025-02-21. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62813:2025 E
European foreword
The text of document 40/3178/FDIS, future edition 2 of IEC 62813, prepared by TC 40 "Capacitors
and resistors for electronic equipment" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN IEC 62813:2025.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2026-02-28
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2028-02-29
document have to be withdrawn
This document supersedes EN 62813:2015 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62813:2025 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 61881-3:2012 NOTE Approved as EN 61881-3:2012 (not modified)
IEC 62391-1:2022 NOTE Approved as EN IEC 62391-1:2022 (not modified)
IEC 62576:2018 NOTE Approved as EN IEC 62576:2018 (not modified)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 60068-1 2013 Environmental testing - Part 1: General EN 60068-1 2014
and guidance
IEC 62813 ®
Edition 2.0 2025-01
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Lithium-ion capacitors for use in electric and electronic equipment –
Test methods for electrical characteristics
Condensateurs au lithium-ion destinés à être utilisés dans les équipements
électriques et électroniques – Méthodes d'essai relatives aux caractéristiques
électriques
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 31.060.99 ISBN 978-2-8327-0137-9
– 2 – IEC 62813:2025 © IEC 2025
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Test methods . 8
4.1 Test requirements . 8
4.1.1 Standard atmospheric conditions for tests . 8
4.1.2 Standard atmospheric conditions for measurements . 8
4.1.3 Pre-conditioning . 8
4.2 Measurement . 8
4.2.1 Capacitance, discharge accumulated electric energy, and internal
resistance . 8
4.2.2 Measurement for voltage maintenance rate . 11
4.3 Calculation . 13
4.3.1 Calculation of capacitance and discharge accumulated electric energy . 13
4.3.2 Calculation of internal resistance . 14
4.3.3 Calculation of voltage maintenance rate . 15
Annex A (informative) Endurance test (continuous application of rated voltage at high
temperature) . 16
A.1 General . 16
A.2 Test procedure . 16
A.2.1 Test conditions . 16
A.2.2 Test procedure . 16
A.2.3 Requirements . 16
Annex B (informative) Calculation of the measuring currents based on the propagated
error . 18
B.1 General . 18
B.2 Measurement propagated error and measuring currents . 18
Annex C (informative) Procedures for defining the measuring current of LIC with
uncertain nominal internal resistance . 21
C.1 General . 21
C.2 Defining procedures of measuring current for LIC . 21
Bibliography . 22
Figure 1 – Basic circuit for measuring capacitance, discharge accumulated electric
energy, and internal resistance . 9
Figure 2 – Voltage profile for measuring capacitance, discharge accumulated electric
energy, and internal resistance . 11
Figure 3 – Basic circuit for measuring the voltage maintenance rate . 12
Figure 4 – Voltage profile for measuring voltage maintenance rate . 13
Figure C.1 – Flowchart of current setting procedures . 21
IEC 62813:2025 © IEC 2025 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
LITHIUM-ION CAPACITORS FOR USE
IN ELECTRIC AND ELECTRONIC EQUIPMENT –
TEST METHODS FOR ELECTRICAL CHARACTERISTICS
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) IEC draws attention to the possi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.