SIST EN 13720:2002
(Main)Transportable gas cylinders - Filling conditions for acetylene battery vehicles
Transportable gas cylinders - Filling conditions for acetylene battery vehicles
This European Standard specifies the requirements for filling acetylene battery vehicles.
Ortsbewegliche Gasflaschen - Abfüllbedingungen für Acetylen-Batterie-Fahrzeuge
Diese Europäische Norm legt Abfüllbedingungen von Acetylen-Batterie-Fahrzeugen fest. Unterschiedliche porösen Massen und unterschiedliche Lösemitteln können zugelassen sein, wobei alle Flaschen im Fahrzeug die gleiche poröse Masse und auch das gleiche Lösemittel haben müssen.
Bouteilles a gaz transportables - Conditions de remplissage des véhicules - batteries d'acétylene
La présente norme européenne spécifie les exigences de remplissage des véhicules-batteries d'acétylene. Différentes masses poreuses et différents solvants peuvent etre utilisés a condition que toutes les bouteilles du véhicule aient la meme masse poreuse et le meme solvant.
Premične plinske jeklenke - Zahteve za polnjenje acetilenskih baterijskih vozil
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Ortsbewegliche Gasflaschen - Abfüllbedingungen für Acetylen-Batterie-FahrzeugeBouteilles a gaz transportables - Conditions de remplissage des véhicules - batteries d'acétyleneTransportable gas cylinders - Filling conditions for acetylene battery vehicles23.020.30MHNOHQNHPressure vessels, gas cylindersICS:Ta slovenski standard je istoveten z:EN 13720:2002SIST EN 13720:2002en01-november-2002SIST EN 13720:2002SLOVENSKI
STANDARD
SIST EN 13720:2002
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13720July 2002ICS 23.020.30English versionTransportable gas cylinders - Filling conditions for acetylenebattery vehiclesBouteilles à gaz transportables - Conditions de remplissagedes véhicules - batteries d'acétylèneOrtsbewegliche Gasflaschen - Abfüllbedingungen fürAcetylen-Batterie-FahrzeugeThis European Standard was approved by CEN on 11 April 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13720:2002 ESIST EN 13720:2002
EN 13720:2002 (E)2ContentspageForeword.3Introduction.41Scope.52Normative references.53Terms and definitions.54Requirements for filling acetylene vehicles.65Filling of acetylene vehicles.8Bibliography.10SIST EN 13720:2002
EN 13720:2002 (E)3ForewordThis document EN 13720:2002 has been prepared by Technical Committee CEN/TC 23 "Transportable gascylinders", the secretariat of which is held by BSI.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by January 2003, and conflicting national standards shall be withdrawn at the latestby January 2003.This European Standard has been submitted for reference into the RID and/or in the technical annexes of the ADR.Therefore in this context the standards listed in the normative references and covering basic requirements of theRID/ADR not addressed within the present standard are normative only when the standards themselves arereferred to in the RID and/or in the technical annexes of the ADR.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain,Sweden, Switzerland and the United Kingdom.SIST EN 13720:2002
EN 13720:2002 (E)4IntroductionThis European Standard is designed to harmonize the different filling conditions for acetylene battery vehicles(acetylene vehicles) in European countries.The term "acetylene battery vehicle" covers a number of different systems which connect acetylene cylinders (seeEN 1800) or acetylene bundles (see EN 12755) in a single unit for the purpose of storage, transport and use ofacetylene.SIST EN 13720:2002
EN 13720:2002 (E)51 ScopeThis European Standard specifies the requirements for filling acetylene battery vehicles.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text, and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies (including amendments).EN 1801, Transportable gas cylinders — Filling conditions for single acetylene cylinders.EN 12754, Transportable gas cylinders — Cylinders for dissolved acetylene — Inspection at time of filling.EN 12755:2000, Transportable gas cylinders — Filling conditions for acetylene bundles.prEN 13807, Transportable gas cylinders — Battery vehicles — Design, manufacture, identification and testing.3 Terms and definitionsFor the purposes of this European Standard, the following terms and definitions apply.3.1acetylene battery vehicle (acetylene vehicle)assembly of cylinders or bundles connected to a manifold and securely attached to a vehicle chassis such that theassembly is transported and emptied as a single unit and can be filled as a single unit3.2acetylene vehicle type Avehicle where cylinders or bundles are removed from the vehicle for the purpose of filling individually3.3acetylene vehicle type Bvehicle where cylinders or bundles are filled and emptied a prescribed number of times without removal from thevehicle3.4tare weight of an acetylene vehiclesum of the tare weight of the individual cylinders [EN 1800:1998] or bundles [EN 12755:2000] plus the weight of theassociated pipework, fittings, supports and the chassis3.5maximum gross weightsum of the total weight of the individual cylinders or the maximum gross weight of the bundles plus the weight ofthe associated pipework, fittings, supports and the chassis3.6maximum acetylene contentsum of the maximum weights of acetylene permitted in the cylinders or bundlesSIST EN 13720:2002
EN 13720:2002 (E)63.7porous masssingle or multi-component substance introduced into, or formed in the cylinder shell, in order to fill it and due
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.