SIST EN 3745-602:2008

• Abstract:

  This test method is intended for use in determining the concentration of specific gas components of smoke released by cable insulation materials.; It shall be used together with EN 3745-100.

• Status: Published
• Publication Date: 18-May-2008
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 14-Apr-2008
• Due Date: 19-Jun-2008
• Completion Date: 19-May-2008
• Ref Project: EN 3745-602:2008 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 602: Toxicity

• Refers: SIST EN 3745-100:2008 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 100: General
• Effective Date: 28-Jan-2026
• Refers: SIST EN 3475-602:2007 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 602: Toxicity
• Effective Date: 28-Jan-2026
• Referred By: SIST EN 4641-200:2019 - Aerospace series - Cables, optical, 125 µm diameter cladding - Part 200: Semi-loose structure 9/125 µm GI fibre nominal 0,9 mm outside diameter - Product standard
• Effective Date: 28-Jan-2026
• Referred By: SIST EN 4641-102:2009 - Aerospace series - Cables, optical 125 μm outside diameter cladding - Part 102: Semi-loose 62,5/125 µm GI fibre nominal 1,8 mm outside diameter - Product standard
• Effective Date: 28-Jan-2026
• Referred By: SIST EN 4641-202:2019 - Aerospace series - Cables, optical, 125 µm diameter cladding - Part 202: Semi-loose, ruggedized simplex construction 9/125 µm SM fibre nominal 2,74 mm outside diameter - Product standard
• Effective Date: 28-Jan-2026
• Referred By: SIST EN 4641-401:2024 - Aerospace series - Cables, optical 125 μm diameter cladding - Part 401: Tight structure bend insensitive 50 µm/125 µm GI fibre nominal, 1,8 mm outside diameter - Product standard
• Effective Date: 28-Jan-2026
• Referred By: SIST EN 4641-103:2025 - Aerospace series - Cables, optical 125 μm diameter cladding - Part 103: Semi-loose, ruggedized simplex construction 62,5/125 µm GI fibre nominal 2,74 mm, outside diameter - Product standard
• Effective Date: 28-Jan-2026
• Referred By: SIST EN 4641-301:2011 - Aerospace series - Cables, optical 125 μm diameter cladding - Part 301: Tight structure 50/125 µm GI fibre nominal 1,8 mm outside diameter - Product standard
• Effective Date: 28-Jan-2026
• Referred By: SIST EN 4641-102:2025 - Aerospace series - Cables, optical 125 μm outside diameter cladding - Part 102: Semi-loose 62,5/125 µm GI fibre nominal 1,8 mm outside diameter - Product standard
• Effective Date: 28-Jan-2026
• Referred By: SIST EN 4641-100:2015 - erospace series - Cables, optical 125 μm diameter cladding - Part 100: Tight structure 62,5/125 µm core GI fibre 1,8 mm outside diameter - Product standard
• Effective Date: 28-Jan-2026
• Referred By: SIST EN 4641-201:2019 - Aerospace series - Cables, optical, 125 µm diameter cladding - Part 201: Semi-loose structure 9/125 µm SM fibre nominal 1,8 mm outside diameter - Product standard
• Effective Date: 28-Jan-2026
• Referred By: SIST EN 4641-301:2022 - Aerospace series - Cables, optical 125 μm diameter cladding - Part 301: Tight structure 50/125 μm GI, fibre nominal 1,8 mm, outside diameter - Product standard
• Effective Date: 28-Jan-2026
• Referred By: SIST EN 4641-301:2024 - Aerospace series - Cables, optical 125 μm diameter cladding - Part 301: Tight structure 50/125 μm GI, fibre nominal 1,8 mm, outside diameter - Product standard
• Effective Date: 28-Jan-2026
• Referred By: SIST EN 4641-101:2015 - Aerospace series - Cables, optical 125 μm diameter cladding - Part 101: Tight structure 62,5 μm core GI fibre 0,9 mm outside diameter - Product standard
• Effective Date: 28-Jan-2026
• Referred By: SIST EN 4532:2009 - Aerospace series - Cables, optical, single core 200 µm/280 µm fibre, 2,5 mm outer jacket - Technical specification
• Effective Date: 28-Jan-2026

SIST EN 3745-602:2008 is the Slovenian adoption of EN 3745-602:2008, published by SIST. It specifies a toxicity test method for aerospace optical fibres and cables used on aircraft, by determining the concentration of specific gas components in smoke released from cable insulation materials. Engineers, laboratories, and quality teams use it when they need a common test basis for aircraft cable materials.

What does SIST EN 3745-602:2008 specify?

SIST EN 3745-602:2008 covers one focused test method in the aerospace series for optical fibres and cables for aircraft use. The method is aimed at smoke from cable insulation materials and the gas components measured in that smoke.

The document is organized into a foreword and three clauses:

• Clause 1 - Scope
• Clause 2 - Normative references
• Clause 3 - Method

Clause 1 also makes clear that this part is used together with EN 3745-100, so it is not a stand-alone test specification.

What are the key requirements of SIST EN 3745-602:2008?

SIST EN 3745-602:2008 is a short procedural standard. Its main technical points are the test purpose, the required companion standard, and the referenced method it follows.

• Clause 1 states that the method is for determining the concentration of specific gas components of smoke released by cable insulation materials. In practice, this means the test is about smoke toxicity-related gas output, not general mechanical or electrical performance.
• Clause 1 says the standard shall be used together with EN 3745-100. In practice, users need the general part of the EN 3745 test-method series to apply this part correctly.
• Clause 3 states that the method is in accordance with EN 3475-602 - Toxicity. In practice, the actual toxicity procedure is taken from that referenced method, so the reader must follow the linked method rather than treat this part as a full standalone procedure.
• The scope ties the method to cable insulation materials used in the aerospace environment. In practice, this tells suppliers and test labs which material type is covered when preparing samples and reporting results.

Who uses SIST EN 3745-602:2008?

SIST EN 3745-602:2008 is used in the aerospace sector, especially where optical fibres and cables are designed, qualified, or tested for aircraft use. It is relevant to laboratories performing material testing, manufacturers of aircraft cables, and engineering or quality staff who need a common method for evaluating smoke toxicity-related behavior.

It is also useful for buyers and specifiers who need to compare cable insulation materials against the same test basis. In practice, that helps make procurement and qualification decisions on a consistent technical footing.

Which standards are used with SIST EN 3745-602:2008?

• EN 3745-100 - the general part for aerospace series test methods. This standard is stated as indispensable and is used together with this part.
• EN 3475-602 - the toxicity method that this document follows. It provides the method basis for the toxicity test referenced in Clause 3.

What does the SIST EN 3745-602:2008 document contain?

The document contains a foreword and three short clauses: Scope, Normative references, and Method. Its technical body is concise and points the reader to EN 3745-100 and EN 3475-602 rather than repeating a long procedure.

For practical use, this means the document serves as a locator for the relevant toxicity test in the EN 3745 series. Users should read it with the companion standards because the detailed method is not set out here in full.

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 602: ToxicitySérie aérospatiale — Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 602 : ToxicitéLuft- und Raumfahrt — Faseroptische Leitungen für Luftfahrzeuge - Prüfverfahren - Teil 602: Giftigkeit49.060Aerospace electric equipment and systemsICS:SIST EN 3745-602:2008enTa slovenski standard je istoveten z:EN 3745-602:200801-julij-2008SIST EN 3745-602:2008SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3745-602April 2008ICS 49.060 English VersionAerospace series - Fibres and cables, optical, aircraft use - Testmethods - Part 602: ToxicitySérie aérospatiale - Fibres et câbles optiques à usageaéronautique - Méthodes d'essais - Partie 602 : ToxicitéLuft- und Raumfahrt - Faseroptische Leitungen fürLuftfahrzeuge - Prüfverfahren - Teil 602: GiftigkeitThis European Standard was approved by CEN on 23 June 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3745-602:2008: E
...