SIST EN 60115-1:2012/A11:2015

Fixed resistors for use in electronic equipment - Part 1: Generic specification

IEC 60115-1: 2008(E) is a generic specification and is applicable to fixed resistors for use in electronic equipment. It establishes standard terms, inspection procedures and methods of test for use in sectional and detail specifications of electronic components for quality assessment or any other purpose. This fourth edition cancels and replaces the third edition issued in 1999 and Amendment 1 (2001). It constitutes a technical revision. It contains the following significant technical changes with respect to the previous edition:  a) implementation of Annex Q which replaces Clause 3;  b) addition of new tests procedures in 4.34 through 4.38;  c) removal of the property 'temperature characteristics' from 4.8;  d) introduction of a new system of test severities for the shear test in  4.32;  e) introduction of new bias voltages for the damp heat steady-state test in 4.24;  f) furthermore, this fourth edition cancels and replaces the third edition published in 1999 and constitutes minor revisions related to tables, figures and references.

Festwiderstände zur Verwendung in Geräten der Elektronik - Teil 1: Fachgrundspezifikation

Résistances fixes utilisées dans les équipements électroniques - Partie 1: Spécification générique

Fiksni upori za elektronsko opremo - 1. del: Rodovna specifikacija - Dopolnilo A11

General Information

• Status: Published
• Publication Date: 13-Aug-2015
• ICS: 31.040.10 - Fixed resistors
• Technical Committee: I11 - Imaginarni 11
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 15-Jun-2015
• Due Date: 20-Aug-2015
• Completion Date: 14-Aug-2015
• Ref Project: EN 60115-1:2011/A11:2015 - Fixed resistors for use in electronic equipment - Part 1: Generic specification

Relations

• Amends: SIST EN 60115-1:2012 - Fixed resistors for use in electronic equipment - Part 1: Generic specification
• Effective Date: 01-Sep-2015
• Revised: SIST EN 60115-1:2023 - Fixed resistors for use in electronic equipment - Part 1: Generic specification (IEC 60115-1:2020 (MOD)
• Effective Date: 10-Mar-2020

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60115-1:2012/A11:2015
01-september-2015
Fiksni upori za elektronsko opremo - 1. del: Rodovna specifikacija - Dopolnilo A11
Fixed resistors for use in electronic equipment - Part 1: Generic specification
Festwiderstände zur Verwendung in Geräten der Elektronik - Teil 1:
Fachgrundspezifikation
Résistances fixes utilisées dans les équipements électroniques - Partie 1: Spécification
générique
Ta slovenski standard je istoveten z: EN 60115-1:2011/A11:2015
ICS:
31.040.10 Fiksni upor Fixed resistors
SIST EN 60115-1:2012/A11:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60115-1:2012/A11:2015

---------------------- Page: 2 ----------------------

SIST EN 60115-1:2012/A11:2015


EUROPEAN STANDARD
EN 60115-1:2011/A11

NORME EUROPÉENNE

EUROPÄISCHE NORM
May 2015
ICS 31.040.10

English Version
Fixed resistors for use in electronic equipment -
Part 1: Generic specification
Résistances fixes utilisées dans les équipements Festw iderstände zur Verw endung in Geräten der
électroniques - Partie 1: Spécification générique Elektronik - Teil 1: Fachgrundspezifikation
This amendment A11 modifies the European Standard EN 60115-1:2011; it w as approved by CENELEC on 2015-03-23. CENELEC
members are bound to comply w ith the CEN/CENELEC Internal Regulations w hich stipulate the conditions for giving this amendment the
status of a national standard w ithout any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under
the responsibility of a CENELEC member into its ow n language and notified to the CEN-CENELEC Management Centre has the same status
as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norw ay, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sw eden, Sw itzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved w orldw ide for CENELEC Members.
 Ref. No. EN 60115-1:2011/A11:2015 E

---------------------- Page: 3 ----------------------

SIST EN 60115-1:2012/A11:2015
EN 60115-1:2011/A11:2015 - 2 -
Contents Page
Foreword. 3
1 Modification to 4.13 . 4
2 Modification to 4.16 . 4
3 Modification to 4.18 . 4
4 Modification to 4.19 . 4
5 Modification to 4.20 . 4
6 Modification to 4.21 . 4
7 Modification to 4.22 . 4
8 Modification to 4.23 . 4
9 Modification to 4.24 . 5
10 Modification to 4.25 . 5
11 Modification to 4.27 . 5
12 Modification to 4.28 . 5
13 Modification to 4.33 . 5
14 Modification to 4.36 . 5
15 Modification to 4.37 . 6
16 Modification to 4.38 . 6
17 Modification to 4.39 .
...