SIST-TP CEN/TR 115-3:2010

Safety of escalators and moving walks - Part 3: Correlation between EN 115:1995 and its amendments and EN 115-1:2008

This technical report applies to escalators and moving walks built in accordance with EN 115-1:2008.

Sicherheit von Fahrtreppen und Fahrsteigen - Teil 3: Übereinstimmung der EN 115:1995 und ihren Ergänzungen mit EN 115-1:2008

Sécurité des escaliers mécaniques et trottoirs roulants - Partie 3 : Corrélation entre l'EN 115:1995 et ses amendements et l'EN 115-1:2008

Le présent rapport technique s’applique aux escaliers mécaniques et trottoirs roulants construits conformément à l’EN 115-1:2008.

Varnost tekočih stopnic in trakov za osebe - 3. del: Medsebojna odvisnost med EN 115:1995, njegovimi dopolnili in EN 115-1:2008

To tehnično poročilo velja za tekoče stopnice in trakove za osebe, vgrajene v skladu z EN 115-1:2008.

General Information

• Status: Withdrawn
• Publication Date: 05-Sep-2010
• Withdrawal Date: 07-Jan-2018
• ICS: 91.140.90 - Lifts. Escalators
• Technical Committee: DTN - Lift and transport appliances
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 22-Dec-2017
• Due Date: 14-Jan-2018
• Completion Date: 08-Jan-2018
• Ref Project: CEN/TR 115-3:2009 - Safety of escalators and moving walks - Part 3: Correlation between EN 115:1995 and its amendments and EN 115-1:2008

Relations

• Replaced By: SIST-TP CEN/TR 115-3:2018 - Safety of escalators and moving walks - Part 3: Correlation between EN 115-1:2008+A1:2010 and EN 115-1:2017
• Effective Date: 06-Dec-2017

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TP CEN/TR 115-3:2010
01-oktober-2010
9DUQRVWWHNRþLKVWRSQLFLQWUDNRY]DRVHEHGHO0HGVHERMQDRGYLVQRVWPHG(1
QMHJRYLPLGRSROQLOLLQ(1
Safety of escalators and moving walks - Part 3: Correlation between EN 115:1995 and its
amendments and EN 115-1:2008
Sicherheit von Fahrtreppen und Fahrsteigen - Teil 3: Übereinstimmung der EN 115:1995
und ihren Ergänzungen mit EN 115-1:2008
Sécurité des escaliers mécaniques et trottoirs roulants - Partie 3 : Corrélation entre l'EN
115:1995 et ses amendements et l'EN 115-1:2008
Ta slovenski standard je istoveten z: CEN/TR 115-3:2009
ICS:
91.140.90 'YLJDOD7HNRþHVWRSQLFH Lifts. Escalators
SIST-TP CEN/TR 115-3:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TP CEN/TR 115-3:2010

---------------------- Page: 2 ----------------------

SIST-TP CEN/TR 115-3:2010


TECHNICAL REPORT
CEN/TR 115-3

RAPPORT TECHNIQUE

TECHNISCHER BERICHT
November 2009
ICS 91.140.90
English Version
Safety of escalators and moving walks - Part 3: Correlation
between EN 115:1995 and its amendments and EN 115-1:2008
Sécurité des escaliers mécaniques et trottoirs roulants - Sicherheit von Fahrtreppen und Fahrsteigen - Teil 3:
Partie 3: Corrélation entre l'EN 115:1995 et ses Übereinstimmung zwischen EN 115:1995 und ihrer
amendements et l'EN 115-1:2008 Ergänzungen und EN 115-1:2008


This Technical Report was approved by CEN on 31 August 2009. It has been drawn up by the Technical Committee CEN/TC 10.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.






EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TR 115-3:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TP CEN/TR 115-3:2010
CEN/TR 115-3:2009 (E)
Contents Page
Foreword .3
Introduction .4
1 Scope .5
2 Correlation between EN 115:1995 and EN 115-1:2008 .5
Bibliography . 24

2

---------------------- Page: 4 ----------------------

SIST-TP CEN/TR 115-3:2010
CEN/TR 115-3:2009 (E)
Foreword
This document (CEN/TR 115-3:2009) has been prepared by Technical Committee CEN/TC 10 “Lifts,
escalators and moving walks”, the secretariat of which is held by AFNOR.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
3

---------------------- Page: 5 ----------------------

SIST-TP CEN/TR 115-3:2010
CEN/TR 115-3:2009 (E)
Introduction
This guide has been prepared to allow the user to compare the former standard EN 115:1995, including
amendments A1 and A2, with the revision EN 115-1:2008.
The revision of the standard was mandated by CEN with reference to the 10-year updating of European
Standards and to bring the standard in line with EN 414 in terms of structure and content.
The revision of EN 115 on this basis has resulted in a total restructuring of the document in line with the rules
in EN 414 and the determination of safety requirements has been reviewed based upon hazard analysis and
risk assessment.
Additionally safety requirements related exclusively to the machine are contained in Clause 5 of the revised
standard. Other safety requirements are detailed in the annexes, some of which are normative and others
informative.
4

---------------------- Page: 6 ----------------------

SIST-TP CEN/TR 115-3:2010
CEN/TR 115-3:2009 (E)
1 Scope
This technical report applies to escalators and moving walks built in accordance with EN 115-1:2008.
2 Correlation between EN 115:1995 and EN 115-1:2008
This Technical Report is presented in the form of two tables. Table 1 provides a correlation between
EN 115:1995, including amendments A1:1998 and A2:2004, and EN 115-1:2008 based upon the
chronological clause references of EN 115. Table 2 provides a similar correlation but using EN 115-1:2008 as
the base document for comparison.
Each clause is cross-referenced to its equivalent clause and the table illustrates the status of the text or
requirement. Guidance is given on whether the clause has remained unchanged, is modified, is new or has
been deleted.
Where appropriate a short explanation is given in the "Remarks" column to highlight changes and new
requirements contained in the revision of EN 115-1:2008.
5

---------------------- Page: 7 ----------------------

SIST-TP CEN/TR 115-3:2010
CEN/TR 115-3:2009 (E)
Table 1 - Correlation between EN 115 (incl. amendments) and EN 115-1:2008 (order of EN 115)
EN 115:1995
EN 115-1:
+A1:1998 Remarks
2008
+A2:2004
0.5.1 5.9 X  Specified characteristics included
0.5.2 Introduction (11) X
0.5.3 Annex I  X Restrictions of the use of shopping trolleys and
baggage carts
3.8 Annex H.1 X  Maximum capacities defined (modified to reflect
achievable carrying capacity)
3.9 Annex H.2 (1) X
partly
5.1.1.1 5.2.1.1 X
5.1.1.2 5.2.1.3 X
5.1.1.3 5.2.1.4 X  General comment on fire protection now in 5.9
5.1.2 5.2.1.2 X  Now contains specific values for strength of the
enclosure and fixings
- 5.2.1.6  X New requirement for safety device
5.1.3.1 5.2.4 (1)  X Requirement for safety switch
X
5.1.3.2 5.2.4 (2,3)
5.1.3.3 -  X Covered by 5.2.4 (1)
5.1.3.4 5.2.4 (4) X
5.1.4 5.2.1.5 X  Improvement of former wording
5.1.5.1 5.5.1 X  Definitions shifted to Clause 3
5.1.5.2 (1) 5.5.2.2 (1) X
5.1.5.2 (2) 5.5.2.2 (ex (1)) X  Now contains specific dimensions and design
requirements
X
5.1.5.3 5.5.2.3 Additional requirement for lateral force added
5.1.5.4 (1,2,3,4) 5.5.2.4 (1,2,3,4) X
5.1.5.4 (5) 5.5.2.4 (5) X  Absolute requirement for toughened glass and
requirements for multi-layer glass defined
5.1.5.5 -  X Specific information given in other clause
5.1.5.6 5.5.3.1 X
5.5.3.2
5.1.5.6.1 5.5.3.1 Note X
5.1.5.6.2 5.5.3.3 X
X
5.1.5.6.3 a) b) d) 5.5.3.4 a) b) c)
X
5.1.5.6.3 c) 5.5.3.4 d) Now includes specific values for coefficient of
friction for escalators
st
X
5.1.5.7 5.5.2.6, 1
sentence
6
Unchanged
Modified
New
Deleted

---------------------- Page: 8 ----------------------

SIST-TP CEN/TR 115-3:2010
CEN/TR 115-3:2009 (E)
Table 1 (continued)
EN 115:1995
EN 115-1:
+A1:1998 Remarks
2008
+A2:2004
nd
5.1.5.7.1 (1) 5.5.2.6, 2 X
sentence
X
5.1.5.7.1 (2) 5.5.2.6.1
X
5.1.5.7.2 5.5.2.6.2
5.1.5.8 5.5.2.5 X
5.1.5.9 5.5.4.1 X
X
5.2.1 (1) Annex A.2.5
5.2.1 (2) Annex A.2.6 X
- Annex A.2.7  X Requirement for protection against falling from the
landing
5.2.2 5.7.1 X  Now includes definitions for materials and test
methods for anti-slip properties (Annex J)
X
5.2.3 Annex A.2.1
X
5.2.4 Annex A.2.4 Reference point for b changed to outer edge
9
5.3 5.2.5 X  Requirement for public service machines (1/1000)
deleted
5.4.1 Annex A.2.8 X
5.4.2 Annex A.2.9 X  All lighting levels defined as 50 lx
5.5 5.10 X
6.1 Annex A.3.2 X  Requirement for machinery space access to be
lockable
6.1 (1) 5.2.3 X
X
6.1 (ex 1) 5.8.1 (1,2)
X
6.2.1 (1) Annex A.3.1
6.2.1 (2) Annex A.3.6 (1) X
6.2.2 -  X
X
6.3.1.1 5.8.2.1
- 5.8.2.2  X Requirement for lifting attachments
6.3.1.2 5.8.2.3 X
6.3.1.3 (ex c) Annex A.3.5 X
6.3.1.3 c) Annex A.3.6(2) X
6.3.1.4 Annex A.3.7 X
6.3.2 (1) Annex A.3.3 X  Requirements for lighting levels
st
1 sentence
 X
- Annex A.3.4 Requirement for emergency lighting
7
Unchanged
Modified
New
Deleted

---------------------- Page: 9 ----------------------

SIST-TP CEN/TR 115-3:2010
CEN/TR 115-3:2009 (E)
Table 1 (continued)
EN 115:1995
EN 115-1:
+A1:1998 Remarks
2008
+A2:2004
6.3.2 (1) 5.8.3.2 (1) X
nd rd
2 and 3
sentence
- 5.8.3.2 (2) X  Requirement for lighting level
6.3.2 (2) 5.8.3.1 X
st
1 sentence
6.3.3 5.8.4 X
7.1 5.6.1 (1) X
- 5.6.1 (2)  X Requirement on handrail speed monitoring
7.2 5.5.4.2 X
7.3.1 (1) (2) 5.6.2.1 X
7.3.1 (3) Annex A.2.2 X  Requirement for vertical distance b defined
12
X
7.3.1 (4) Annex A.2.3 Minimum distance increased to 160 mm
X
7.3.2 5.6.2.2
7.3.3 5.6.2.3 X
7.4 5.6.3 X
X
7.5.1 5.6.4.1
7.5.2 5.6.4.2 X  Additional requirement to reduce risk of trapping
between handrail and floor plate
7.5.3 5.6.4.3 X
7.6 5.5.2.1 X
7.7 5.6.5 X
7.8 -  X Requirement not necessary because of handrail
monitoring (see 5.6.1)
8.1.1 (1) 5.3.2.2.1 X
8.1.1 (2) -  X Not a machinery safety item. Mentioned in the
Introduction.
8.1.2 5.3.2.2.2 X
8.1.3 (1) 5.3.2.1 (1) X
8.1.3 (2) 5.3.2.1 (2) X  Maximum width of moving walk defined
8.2.1 (1) 5.3.3.1 (1,2,4)  X Requirement for life cycle, torsional effects and
assembled steps and pallets introduced
X
8.2.1 (2) 5.3.3.1 (3)
X
8.2.2.1.1 5.3.3.2.1
8.2.2.1.2 5.3.3.2.3 X
8.2.2.2.1 5.3.3.3.1.1 (1,2,4) X
 X
- 5.3.3.3.1.1 (3) Requirements for components parts added
8
Unchanged
Modified
New
Deleted

---------------------- Page: 10 ----------------------

SIST-TP CEN/TR 115-3:2010
CEN/TR 115-3:2009 (E)
Table 1 (continued)
EN 115:1995
EN 115-1:
+A1:1998 Remarks
2008
+A2:2004
- 5.3.3.3.1.2  X Requirement for torsional test
8.2.2.2.2 5.3.3.3.2.1 X
(1,2,3,5)
 X
- 5.3.3.3.2.1 (4) Requirements for components parts added
- 5.3.3.3.2.2  X Requirement for torsional test
st
8.2.3.1 1 part 5.3.2.3.3 X
nd
X
8.2.3.1 2 part 5.3.1 (1) Defines tolerance
- 5.3.1 (2)  X Specifies requirements for secure foothold
8.2.3.2 5.3.2.2.5 X
8.2.3.3 5.3.2.2.6 X
8.2.3.4 5.3.2.2.7 X
8.2.3.5 5.3.2.2.8 X
8.2.3.6 5.3.2.2.9 X
8.2.4.1 5.3.2.3.1 X
X
8.2.4.2 5.3.2.3.2
X
8.2.4.3 5.3.2.3.3
8.2.4.4 5.3.2.3.4 X
8.2.4.5 5.3.2.3.5 X
X
8.2.4.6.1.1 5.3.3.2.4
8.2.4.6.1.2 5.3.4 (3) X
8.2.5 (1) 5.3.3.2.2  X New strength requirements
8.2.5 (2) 5.3.2.2.4 X
st
8.3.1 5.7.3.1 1 X
sentence
8.3.2.1 5.7.3.2.1 X
X
8.3.2.2 5.7.3.2.2
X
8.3.2.3 5.7.3.2.3 Maximum angle reduced to 35°
8.3.2.4 (1) 5.7.3.2.4 X
nd
8.3.2.4 (2) 5.7.3.1 2 X
sentence
8.3.2.5 5.7.3.2.5 X  Common requirement for all types of machine
8.3.2.6 5.7.3.2.6 X  Improved wording
9.1.1 5.4.3.1 X
- 5.4.3.2 (1)  X Fatigue life requirement
9.1.2 (1) 5.4.3.2 (2) X
st
1 sentence
9
Unchanged
Modified
New
Deleted

---------------------- Page: 11 ----------------------

SIST-TP CEN/TR 115-3:2010
CEN/TR 115-3:2009 (E)
Table 1 (continued)
EN 115:1995
EN 115-1:
+A1:1998 Remarks
2008
+A2:2004
st
9.1.2 (2) 5.4.3.2 (2) ex 1 X New material specifications and tensile test
sentence
X
9.1.2 (3) 5.4.3.2 (3)
X
9.1.3 5.4.3.3 Criteria for tensioning device movement
9.2.1 5.4.4.1 X  Requires worst case calculation for force
9.2.2 5.4.4.2 X
  X
9.3 -
10.1.1 5.2.2 X
10.1.2 5.3.1 (1) X  Defines tolerances (see also old 8.2.3.1)
10.1.3 (1) 5.7.2.1 (1) X
10.1.3 (2) 5.7.2.1 (4) X
10.1.3 (3) 5.7.2.1 (2,3) X  Upper limit and speed amended
10.1.4 5.7.2.2 X  Intermediate speed radius of curvature included
for upper transition and lower transition radius of
curvature above 0,65 m/s
10.1.5 5.7.2.3 X
X
10.1.6 5.7.2.4
10.2.1 (1) 5.3.4 (1)  X  Maximum dimensions are defined
10.2.1 (2) 5.3.4 (2) X
10.2.2 5.7.2.5 (1,2) X
11.1 5.3.5 (1,3) X
- 5.3.5 (2)  X Requirement for demarcation
- 5.3.6  X Requirement for detection of missing step/pallet
11.2.1 5.5.5.1 X
X
11.2.2 5.5.5.2
X
11.3.1 5.7.3.3.1 Standardisation of mesh depth for steps, pallets
and belts
X
11.3.2 5.7.3.3.2
11.4.1 5.7.3.3.1 X
11.4.2 5.7.3.3.2 X
12.1 5.4.1.1 X
12.2.1 5.4.1.2.2 X
12.2.2 5.4.1.2.3 (1) X
X
12.2.2.1 5.4.1.2.3 (2)
12.2.2.2 5.4.1.2.3 (3) X
10
Unchanged
Modified
New
Deleted

---------------------- Page: 12 ----------------------

SIST-TP CEN/TR 115-3:2010
CEN/TR 115-3:2009 (E)
Table 1 (continued)
EN 115:1995
EN 115-1:
+A1:1998 Remarks
2008
+A2:2004
12.2.3 5.4.1.2.1 X  Defines the limits for nominal speed; the term
"rated speed" is no longer used in EN 115-1 .
X
12.3.1 5.4.1.3.1
X
12.3.2 5.4.1.3.2 Defines more clearly safety factors for all drives
12.4.1 5.4.2.1.1.1 (1) X
- 5.4.2.1.1.1 (2)  X Excess stopping distance failure lock requirement
X
12.4.1.1 5.4.2.1.1.2
12.4.1.2 5.4.2.1.1.3 X
12.4.2 (1,3) 5.4.2.1.2 (1,3) X
12.4.2 (2) 5.4.2.1.2 (2) X  Deletes the requirement for brake force to be
generated by weights
- 5.4.2.1.1.1 (3)  X Requirement for brake lift monitoring
12.4.3 5.4.2.1.1.4 X
X
12.4.4.1 5.4.2.1.3.1
X
12.4.4.2 5.4.2.1.3.2 (1,2,3)
- 5.4.2.1.3.2 (4)  X Specifies maximum deceleration rate
12.4.4.3 5.4.2.1.3.3 X  Improvement of wording
X
12.4.4.4 (1,2,3,5) 5.4.2.1.3.4
(1,2,3,5)
12.4.4.4 (4) -  X Replaced by the note in 5.4.2.1.3.4
- 5.4.2.1.3.4 (4)  X Specifies maximum deceleration rate
nd
12.5.1 5.4.2.3.1 X  Generalisation of 2 paragraph
12.5.2 5.4.2.3.2 X
12.6.1 5.4.2.2.1 X  Improved wording
X
12.6.2 5.4.2.2.2 (1) Deceleration requirement added
X
12.6.3 5.4.2.2.3
12.6.4 5.4.2.2.4 X
12.6.5 5.4.2.2.5 X
X
12.6.6 5.4.2.2.2 (2)
12.7 (1,3) 5.4.1.4 (1,3) X
12.7 (2) -  X
- 5.4.1.4 (2)  X Requirement for electric safety device
12.8 5.4.1.5 X
12.9 5.8.1 (3) X
13.1 5.11.1.1 X
11
Unchanged
Modified
New
Deleted

---------------------- Page: 13 ----------------------

SIST-TP CEN/TR 115-3:2010
CEN/TR 115-3:2009 (E)
Table 1 (continued)
EN 115:1995
EN 115-1:
+A1:1998 Remarks
2008
+A2:2004
13.1.1.1 5.11.1.2.1 X
13.1.1.2 5.11.1.2.2 X
13.1.2 5.11.1.3 X  Specified now by EN 60204-1
X
13.1.3 5.11.1.4 Specified now by EN 60204-1
X
13.1.4 5.11.1.5
13.1.5 5.11.1.6 X  Specified now by EN 60204-1
13.2. 5.11.2 X
X
13.3 5.11.3
13.4 5.11.4 X
13.5.1 5.11.5.1 X
13.5.2 5.11.5.2 X
X
13.5.3.1 5.11.5.3.1
13.5.3.2 -  X Covered by 5.11.1.2
13.5.3.3 5.11.5.3.2 X
13.5.3.4 5.11.5.3.3 X
  X
13.5.3.5 - Covered by EN 60204-1
13.5.4 5.11.5.4 X
13.6.1 5.8.3.1 X
nd
2 sentence
13.6.2 5.8.3.3 X
13.7 5.11.6
- 5.11.7  X Requirement for protection against electrostatic
loading
14.1.1 5.12.1.1.1 X
14.1.1.1 5.12.1.1.2  X Requirement to consider phase reversal fault
X
14.1.1.2 5.12.1.1.3
14.1.1.3 5.12.1.1.4 X
14.1.2.1.1 5.12.1.2.1.1 X
14.1.2.1.2 5.12.1.2.1.2 X  Defines exceptions
X
14.1.2.1.3 5.12.1.2.1.3
14.1.2.1.4 5.12.1.2.1.4 X
14.1.2.1.5 -  X Covered by requirements in Annex B
14.1.2.1.6 -  X Replaced by the requirements in 5.12.1.2.1.1
X
14.1.2.1.7 5.12.1.2.1.5
14.1.2.2 5.12.1.2.2 X
12
Unchanged
Modified
New
Deleted

---------------------- Page: 14 ----------------------

SIST-TP CEN/TR 115-3:2010
CEN/TR 115-3:2009 (E)
Table 1 (continued)
EN 115:1995
EN 115-1:
+A1:1998 Remarks
2008
+A2:2004
14.1.2.3 5.12.1.2.3 X
14.1.2.4 (1) 5.12.1.2.4 X
14.1.2.4 (2,3) -  X 5.12.1.2.1.1 defines how safety switches and
safety circuits shall operate.
14.1.2.5 5.12.1.2.5 X  Test requirements moved to D.3.1 and D.3.2
14.2.1 5.12.2.1.1 (1) X
X
- 5.12.2.1.1 (2) Clarification from 5.11.1
- 5.12.2.1.1 (3,4)  X New requirement for remote starting
14.2.1.1 5.12.2.1.2  X New requirements for entering speed and
acceleration rate
14.2.1.2 5.12.2.1.3 X
14.2.2.1 5.12.2.2.1 X
14.2.2.2 5.12.2.2.2 X
X
14.2.2.3.1 5.12.2.2.3.1 Positioning for stop switches for emergency
situations mod
...