SIST EN 13523-11:2005

Coil coated metals - Test methods - Part 11: Resistance to solvents (rubbing test)

This part of EN 13523 specifies the procedure for evaluating the degree of curing by determining the resistance of an organic coating on a metallic substrate to solvents.

Bandbeschichtete Metalle - Prüfverfahren - Teil 11: Beständigkeit gegen Lösemittel (Reibtest)

Tôles prélaquées - Méthodes d'essai - Partie 11: Résistance aux solvants (essai de frottement)

La présente partie de l'EN 13523 spécifie le mode opératoire permettant d'évaluer le degré de durcissement en déterminant la résistance aux solvants d'un revetement organique recouvrant un subjectile métallique.

Kovine, prevlečene v svitkih - Preskusne metode - 11. del: Odpornost proti topilom (preskus z brisanjem)

General Information

• Status: Withdrawn
• Publication Date: 31-Mar-2005
• Withdrawal Date: 13-Sep-2011
• ICS: 25.220.60 - Organic coatings
• Technical Committee: IBLP - Paints and varnishes
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 13-Sep-2011
• Due Date: 06-Oct-2011
• Completion Date: 14-Sep-2011
• Ref Project: EN 13523-11:2004 - Coil coated metals - Test methods - Part 11: Resistance to solvents (rubbing test)

Relations

• Replaced By: SIST EN 13523-11:2011 - Coil coated metals - Test methods - Part 11: Resistance to solvents (rubbing test)
• Effective Date: 01-Nov-2011

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13523-11:2005
01-april-2005
.RYLQHSUHYOHþHQHYVYLWNLK3UHVNXVQHPHWRGHGHO2GSRUQRVWSURWLWRSLORP
SUHVNXV]EULVDQMHP
Coil coated metals - Test methods - Part 11: Resistance to solvents (rubbing test)
Bandbeschichtete Metalle - Prüfverfahren - Teil 11: Beständigkeit gegen Lösemittel
(Reibtest)
Tôles prélaquées - Méthodes d'essai - Partie 11: Résistance aux solvants (essai de
frottement)
Ta slovenski standard je istoveten z: EN 13523-11:2004
ICS:
25.220.60 Organske prevleke Organic coatings
SIST EN 13523-11:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13523-11:2005

---------------------- Page: 2 ----------------------

SIST EN 13523-11:2005
EUROPEAN STANDARD
EN 13523-11
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2004
ICS 25.220.60
English version
Coil coated metals - Test methods - Part 11: Resistance to
solvents (rubbing test)
Tôles prélaquées - Méthodes d'essai - Partie 11: Bandbeschichtete Metalle - Prüfverfahren - Teil 11:
Résistance aux solvants (essai de frottement) Beständigkeit gegen Lösemittel (Reibtest)
This European Standard was approved by CEN on 23 September 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13523-11:2004: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13523-11:2005
EN 13523-11:2004 (E)
Foreword
This document (EN 13523-11:2004) has been prepared by Technical Committee CEN/TC 139 “Paints and
varnishes”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by May 2005, and conflicting national standards shall be withdrawn at the latest by
May 2005.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark,
Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
2

---------------------- Page: 4 ----------------------

SIST EN 13523-11:2005
EN 13523-11:2004 (E)
1 Scope
This part of EN 13523 specifies the procedure for evaluating the degree of curing by determining the resistance of
an organic coating on a metallic substrate to solvents.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references,
only the edition cited applies. For undated references, the latest edition of the referenced document (including any
amendments) applies.

EN 13523-0:2001, Coil coated metals — Test methods — Part 0: General introduction and
...