SIST EN ISO 13132:2011
(Main)Laboratory glassware - Petri dishes (ISO 13132:2011)
Laboratory glassware - Petri dishes (ISO 13132:2011)
This International Standard specifies requirements and tests for glass Petri dishes intended for general laboratory purposes and microbiological work.
Laborgeräte aus Glas - Petrischalen (ISO 13132:2011)
Diese Internationale Norm legt Anforderungen und Prüfungen für Petrischalen aus Glas für allgemeine Laborzwecke und für mikrobiologische Arbeiten fest.
Verrerie de laboratoire - Boîtes à Pétri (ISO 13132:2011)
L'ISO 13132:2011 spécifie les exigences et les essais relatifs aux boîtes de Petri en verre destinées à des utilisations générales en laboratoire et en microbiologie.
Laboratorijska steklovina - Petrijevke (ISO 13132:2011)
Ta mednarodni standard določa zahteve in preskuse za steklene petrijevke za splošne laboratorijsko in mikrobiološko delo.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 13132:2011
01-oktober-2011
Laboratorijska steklovina - Petrijevke (ISO 13132:2011)
Laboratory glassware - Petri dishes (ISO 13132:2011)
Laborgeräte aus Glas - Petrischalen (ISO 13132:2011)
Verrerie de laboratoire - Boîtes à Pétri (ISO 13132:2011)
Ta slovenski standard je istoveten z: EN ISO 13132:2011
ICS:
71.040.20 Laboratorijska posoda in Laboratory ware and related
aparati apparatus
SIST EN ISO 13132:2011 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 13132:2011
---------------------- Page: 2 ----------------------
SIST EN ISO 13132:2011
EUROPEAN STANDARD
EN ISO 13132
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2011
ICS 71.040.20; 11.100.01
English Version
Laboratory glassware - Petri dishes (ISO 13132:2011)
Verrerie de laboratoire - Boîtes de Petri (ISO 13132:2011) Laborgeräte aus Glas - Petrischalen (ISO 13132:2011)
This European Standard was approved by CEN on 14 July 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13132:2011: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 13132:2011
EN ISO 13132:2011 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 13132:2011
EN ISO 13132:2011 (E)
Foreword
This document (EN ISO 13132:2011) has been prepared by Technical Committee ISO/TC 48 "Laboratory
equipment" in collaboration with Technical Committee CEN/TC 332 “Laboratory equipment” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2012, and conflicting national standards shall be withdrawn at
the latest by January 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 13132:2011 has been approved by CEN as a EN ISO 13132:2011 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 13132:2011
---------------------- Page: 6 ----------------------
SIST EN ISO 13132:2011
INTERNATIONAL ISO
STANDARD 13132
First edition
2011-07-15
Laboratory glassware — Petri dishes
Verrerie de laboratoire — Boîtes de Petri
Reference number
ISO 13132:2011(E)
©
ISO 2011
---------------------- Page: 7 ----------------------
SIST EN ISO 13132:2011
ISO 13132:2011(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2011 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 13132:2011
ISO 13132:2011(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 13132 was prepared by Technical Committee ISO/TC 48, Laboratory equipment, Subcommittee SC 6,
Glass and plastics ware including volumetric instruments.
© ISO 2011
...
SLOVENSKI STANDARD
oSIST prEN ISO 13132:2010
01-april-2010
Laboratorijska steklovina - Petrijevke (ISO/DIS 13132:2010)
Laboratory glassware - Petri dishes (ISO/DIS 13132:2010)
Laborgeräte aus Glas - Petrischalen (ISO/DIS 13132:2010)
Verrerie de laboratoire - Boîtes à Pétri (ISO/DIS 13132:2010)
Ta slovenski standard je istoveten z: prEN ISO 13132
ICS:
71.040.20 Laboratorijska posoda in Laboratory ware and related
aparati apparatus
oSIST prEN ISO 13132:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 13132:2010
---------------------- Page: 2 ----------------------
oSIST prEN ISO 13132:2010
EUROPEAN STANDARD
DRAFT
prEN ISO 13132
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2010
ICS 71.040.20
English Version
Laboratory glassware - Petri dishes (ISO/DIS 13132:2010)
Verrerie de laboratoire - Boîtes à Pétri (ISO/DIS Laborgeräte aus Glas - Petrischalen (ISO/DIS 13132:2010)
13132:2010)
This draft European Standard is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee
CEN/TC 332.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN ISO 13132:2010: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN ISO 13132:2010
prEN ISO 13132:2010 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
oSIST prEN ISO 13132:2010
prEN ISO 13132:2010 (E)
Foreword
This document (prEN ISO 13132:2010) has been prepared by Technical Committee ISO/TC 48 "Laboratory
equipment" in collaboration with Technical Committee CEN/TC 332 “Laboratory equipment”, the secretariat of
which is held by DIN.
This document is currently submitted to the parallel Enquiry.
Endorsement notice
The text of ISO/DIS 13132:2010 has been approved by CEN as a prEN ISO 13132:2010 without any
modification.
3
---------------------- Page: 5 ----------------------
oSIST prEN ISO 13132:2010
---------------------- Page: 6 ----------------------
oSIST prEN ISO 13132:2010
DRAFT INTERNATIONAL STANDARD ISO/DIS 13132
ISO/TC 48/SC 6 Secretariat: DIN
Voting begins on: Voting terminates on:
2010-02-11 2010-07-11
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Laboratory glassware — Petri dishes
Verrerie de laboratoire — Boîtes de Petri
ICS 11.100.01; 71.040.20
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for Standardization (ISO), and
processed under the ISO-lead mode of collaboration as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member bodies for a parallel
five-month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments received, will be
submitted to a parallel two-month approval vote in ISO and formal vote in CEN.
To expedite distribution, this document is circulated as received from the committee secretariat.
ISO Central Secretariat work of editing and text composition will be undertaken at publication
stage.
Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au
Secrétariat central de l'ISO au stade de publication.
THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE
REFERRED TO AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT, WITH THEIR COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPORTING DOCUMENTATION.
©
International Organization for Standardization, 2010
---------------------- Page: 7 ----------------------
oSIST prEN ISO 13132:2010
ISO/DIS 13132
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the
unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
Copyright notice
This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as permitted
under the applicable laws of the user's country, neither this ISO draft nor any extract from it may be
reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, photocopying,
recording or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or ISO's
member body in the country of the requester.
ISO copyright office
Case postale 56 CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
©
ii ISO 2010 – All rights reserved
---------------------- Page: 8 ----------------------
oSIST prEN ISO 13132:2010
---------------------- Page: 9 ----------------------
oSIST prEN ISO 13132:2010
ISO/DIS 13132
Contents Page
Foreword.3
1 Scope.4
2 Normative references .4
3 Types.4
4 Nominal sizes and series .4
4.1 Nominal sizes.4
4.2 Series .4
5 Designation .5
6 Material .5
7 Dimensions.5
7.1 Petri dishes Series A .5
7.2 Petri dishes Series B .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.