SIST-TP CLC/TR 50607-10:2016
(Main)Satellite signal distribution over a single coaxial cable - Part 10: Implementation guideline
Satellite signal distribution over a single coaxial cable - Part 10: Implementation guideline
This Technical Report describes a number of different satellite reception scenarios and how to use SCD2 here. In particular Universal and Wideband LNB architectures for different SHF bands (Ku-, Ka- and C-Band) are taken into account.
Verteilen von Satellitensignalen über ein Koaxialkabel - Teil 10: Anwendungsleitfaden
Distribution de signaux satellites sur un seul câble coaxial - Partie 10: Lignes directrices de mise en oeuvre
Distribucija satelitskih signalov po enojnem koaksialnem kablu - 10. del: Smernice za izvedbo
To tehnično poročilo opisuje različne scenarije sprejemanja satelitskih signalov in kako v teh primerih uporabljati SCD2. Osredotoča se predvsem na arhitekturi Universal LNB in Wideband LNB za različne pasove SHF (pasovi Ku-, Ka- in C-Band).
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TP CLC/TR 50607-10:2016
01-marec-2016
Distribucija satelitskih signalov po enojnem koaksialnem kablu - 10. del: Smernice
za izvedbo
Satellite signal distribution over a single coaxial cable - Part 10: Implementation guideline
Verteilen von Satellitensignalen über ein Koaxialkabel - Teil 10: Anwendungsleitfaden
Distribution de signaux satellites sur un seul câble coaxial - Partie 10: Lignes directrices
de mise en oeuvre
Ta slovenski standard je istoveten z: CLC/TR 50607-10:2015
ICS:
33.060.40 Kabelski razdelilni sistemi Cabled distribution systems
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
SIST-TP CLC/TR 50607-10:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TP CLC/TR 50607-10:2016
---------------------- Page: 2 ----------------------
SIST-TP CLC/TR 50607-10:2016
TECHNICAL REPORT CLC/TR 50607-10
RAPPORT TECHNIQUE
TECHNISCHER BERICHT
November 2015
ICS 33.060.40
English Version
Satellite signal distribution over a single coaxial cable -
Part 10: Implementation guideline
Distribution de signaux satellites sur un seul câble coaxial - Verteilen von Satellitensignalen über ein Koaxialkabel -
Partie 10: Lignes directrices de mise en œuvre Teil 10: Anwendungsleitfaden
This Technical Report was approved by CENELEC on 2015-09-14.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. CLC/TR 50607-10:2015 E
---------------------- Page: 3 ----------------------
SIST-TP CLC/TR 50607-10:2016
CLC/TR 50607-10:2015
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms, definitions and abbreviations . 5
3.1 Terms and definitions . 5
3.2 Abbreviations . 5
4 Standard applications . 5
4.1 General note for all application examples . 5
4.2 SCD2 Universal LNB. 6
4.3 SCD2 Multi-switch with feed by Quatro LNB . 6
4.4 SCD2 LNB with wideband architecture . 7
4.5 SCD2 Multi-switch with wideband feed . 8
4.6 SCD2 multi-switch (two satellite reception) . 9
4.7 SCD2 C-Band LNB . 9
4.8 SCD2 Ka-Band LNB (dual wideband hardware) . 10
4.9 SCD2 multi-switch with Ka-Band LNB (dual wideband feed) . 10
4.10 SCD2 Ka-Band LNB (ultra-wideband hardware) . 11
5 Conclusion . 11
Figures
Figure 1 — SCD2 Universal- LNB — Example for Ku Band . 6
Figure 2 — SCD2 Multi-switch with standard feed by Universal LNB — Example for Ku Band . 6
Figure 3 — SCD2 LNB with wideband architecture — Example for Ku Band . 7
Figure 4 — SCD2 Multi-switch with wideband feed — Example for Ku Band . 8
Figure 5 — SCD2 multi-switch (two-satellite reception) . 9
Figure 6 — SCD2 C-Band LNB . 9
Figure 7 — SCD2 Ka-Band LNB (dual wideband hardware) . 10
Figure 8 — SCD2 multi-switch with Ka-Band LNB (dual wideband feed) . 10
Figure 9 — SCD2 Ka-Band LNB (ultra-wideband hardware) . 11
2
---------------------- Page: 4 ----------------------
SIST-TP CLC/TR 50607-10:2016
CLC/TR 50607-10:2015
European foreword
This document (CLC/TR 50607-10:2015) has been prepared by CLC/TC 209, “Cable networks for television
signals, sound signals and interactive services”.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.
3
---------------------- Page: 5 ----------------------
SIST-TP CLC/TR 50607-10:2016
CLC/TR 50607-10:2015
Introduction
EN 50607 specifies the second generation of channel stacking systems for satellite reception. The second
generation allows more reception possibilities by increasing the number of user bands and the number of
satellite feeds.
This Technical Report provides implementation examples to assist manufacturers and installers of satellite
distribution and satellite receiving equipment to implement EN 50607 in the most convenient way and to
ease installation of products according to EN 50607.
4
---------------------- Page: 6 ----------------------
SIST-TP CLC/TR 50607-10:2016
CLC/TR 50607-10:2015
1 Scope
This Technical Report describes a number of different satellite reception scenarios and how to use SCD2
here. In particular, Universal and Wideband LNB architectures for different SHF bands (Ku-, Ka- and
C-Band) are taken into account.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
EN 50607, Satellite signal distribution over a single coaxial cable - Second generation
3 Terms, definitions and abbreviations
3.1 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 50607 apply.
3.2 Abbreviations
For the purposes of this document, the abbreviations given in EN 50607 apply.
4 Standard applications
4.1 General note for all application examples
The following examples show block diagrams for one user band only. For more user bands, switch matrix
and converter blocks can be multiplied accordingly.
Function blocks are simplified (no pre-selection filters etc.).
Data format is simplified (offset of 100 MHz in transmitted data is ignored).
Only analogue converters are shown, the examples can be adapted for dCSS solutions accordingly.
Basically, the examples describe applications with:
a) Universal LNB (see 4.2);
b) Multi-switch with feed by Quatro LNB (see 4.3);
c) LNB´s with wideband architecture (see 4.4.);
d) Multi-switch with wideband feed see (4.5);
e) Two satellite reception (see 4.6);
f) C-Band LNB´s (see 4.7);
g) Universal Ka Band LNB with dual wideband hardware (see 4.8);
h) Multi-switch with feed by LNB (dual wideband feed) in 4.9;
i) Ka Band LNB (ultra-wideband hardware) in 4.10.
5
---------------------- Page: 7 ----------------------
SIST-TP CLC/TR 50607-10:2016
CLC/TR 50607-10:2015
4.2 SCD2 Universal LNB
10700.10700.
12750 MHz12750 MHz HL: 950.1950 MHzHL: 950.1950 MHz
LOF 9750 MHzLOF 9750 MHz
Receiver settings:Receiver settings:
HH: 1100.2150 MHzHH: 1100.2150 MHz
Satellite A: Astra 1 KuSatellite A: Astra 1 Ku
FF
UBUB
LOF Lowband: 9750 MHzLOF Lowband: 9750 MHz
LOF 10600 MHzLOF 10600 MHz
LOF Highband: 10600 MHzLOF Highband: 10600 MHz
VL: 950.1950 MHzVL: 950.1950 MHz
LOF 9750 MHzLOF 9750 MHz
HH: 1100.2150 MHzHH: 1100.2150 MHz FF
VVH:H:
OO
LOF 10600 MHzLOF 10600 MHz
Figure 1 — SCD2 Universal- LNB — Example for Ku Band
This example shows a typical Universal LNB with a bank switch and one channel-stacking converter. The
bank switch is controlled using the SCD2 bits .0 (“band”) and .1 (“polarity”). The oscillator of the CSS
converter is controlled by requested IF frequency from receiver plus frequency of the user band. In the
receiver, the LOFs are set accordingly to the real LOFs of the LNB.
EXAMPLE Receiver is set to UB1 with 1 280 MHz. Desired program is 11 494 MHz, low band, horizontal. Receiver
is configured to LOF 9 750 MHz for low band. Receiver calculates IF = 11 494 MHz – 9 750 MHz = 1 744 MHz. This
information is sent in SCD2 data format. To convert 1 744 MHz to 1 280 MHz, the SCD2 converter sets the oscillator to
Fo = 3 024 MHz.
NOTE Concerning LNB configuration (entering of LO frequencies for Low band and High band in), the necessary
configuration measures by the installer are the same as for legacy DiSEqC LNBs. The procedure described above of
course is also valid for LNBs operating in other frequency bands (for example Ka Band). An application with a Universal
LNB which covers a frequency range of more than 2,05 GHz (dual wideband hardware) is described in 4.8.
4.3 SCD2 Multi-switch with feed by Quatro LNB
10700.10700.
12750 MHz12750 MHz
HL: 950.1950 MHzHL: 950.1950 MHz
LOF 9750 MHzLOF 9750 MHz
HH: 1100.2150 MHzHH: 1100.2150 MHz
LOF 10600 MHzLOF 10600 MHz
VL: 950.1950 MHzVL: 950.1950 MHz
LOF 9750 MHzLOF 9750 MHz
HH: 1100.2150 MHzHH: 1100.2150 MHzVVH:H:
LOF 10600 MHzLOF 10600 MHz
Universal Quadro LNBUniversal Quadro LNB SCD2 MultiswitchSCD2 Multiswitch
Receiver settings:Receiver settings
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.