Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 7: Phase sequence

2022-06-02: CLC/TC 85X made a decision to temporarily remove the link, meanwhile working on the harmonziation issue via another amendment togther with CLC/TC 65X

Elektrische Sicherheit in Niederspannungsnetzen bis AC 1 000 V und DC 1 500 V - Geräte zum Prüfen, Messen oder Überwachen von Schutzmaßnahmen - Teil 7: Drehfeld

Sécurité électrique dans les réseaux de distribution basse tension au plus égale à 1 000 V c.a. et 1 500 V c.c. - Dispositifs de contrôle, de mesure ou de surveillance de mesures de protection - Partie 7: Ordre de phases

Električna varnost v nizkonapetostnih razdelilnih sistemih za izmenične napetosti do 1 000 V in enosmerne napetosti do 1 500 V - Oprema za preskušanje, merjenje ali nadzorovanje zaščitnih ukrepov - 7. del: Fazno zaporedje - Dodatek A1

General Information

Status
Published
Public Enquiry End Date
30-Jul-2022
Publication Date
05-Mar-2024
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
10-Oct-2023
Due Date
15-Dec-2023
Completion Date
06-Mar-2024

Relations

Buy Standard

Amendment
EN IEC 61557-7:2022/A1:2024
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
EN IEC 61557-7:2022/oprA1:2022
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 61557-7:2022/A1:2024
01-april-2024
Električna varnost v nizkonapetostnih razdelilnih sistemih za izmenične napetosti
do 1 000 V in enosmerne napetosti do 1 500 V - Oprema za preskušanje, merjenje
ali nadzorovanje zaščitnih ukrepov - 7. del: Fazno zaporedje - Dodatek A1
Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC -
Equipment for testing, measuring or monitoring of protective measures - Part 7: Phase
sequence
Elektrische Sicherheit in Niederspannungsnetzen bis AC 1 000 V und DC 1 500 V -
Geräte zum Prüfen, Messen oder Überwachen von Schutzmaßnahmen - Teil 7: Drehfeld
Sécurité électrique dans les réseaux de distribution basse tension au plus égale à 1 000
V c.a. et 1 500 V c.c. - Dispositifs de contrôle, de mesure ou de surveillance de mesures
de protection - Partie 7: Ordre de phases
Ta slovenski standard je istoveten z: EN IEC 61557-7:2022/A1:2023
ICS:
17.220.20 Merjenje električnih in Measurement of electrical
magnetnih veličin and magnetic quantities
29.080.01 Električna izolacija na Electrical insulation in
splošno general
29.240.01 Omrežja za prenos in Power transmission and
distribucijo električne energije distribution networks in
na splošno general
SIST EN IEC 61557-7:2022/A1:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 61557-7:2022/A1:2024

---------------------- Page: 2 ----------------------
SIST EN IEC 61557-7:2022/A1:2024


EUROPEAN STANDARD EN IEC 61557-7:2022/A1

NORME EUROPÉENNE

EUROPÄISCHE NORM October 2023
ICS 17.220.20; 29.080.01; 29.240.01

English Version
Electrical safety in low voltage distribution systems up to 1 000 V
AC and 1 500 V DC - Equipment for testing, measuring or
monitoring of protective measures - Part 7: Phase sequence
(IEC 61557-7:2019/AMD1:2023)
Sécurité électrique dans les réseaux de distribution basse Elektrische Sicherheit in Niederspannungsnetzen bis AC
tension au plus égale à 1 000 V en courant alternatif et 1 000 V und DC 1 500 V - Geräte zum Prüfen, Messen oder
1 500 V en courant continu - Dispositifs de contrôle, de Überwachen von Schutzmaßnahmen - Teil 7: Phasenfolge
mesure ou de surveillance de mesures de protection - (Drehfeld)
Partie 7: Ordre de phases (IEC 61557-7:2019/AMD1:2023)
(IEC 61557-7:2019/AMD1:2023)
This amendment A1 modifies the European Standard EN IEC 61557-7:2022; it was approved by CENELEC on 2023-09-29. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 61557-7:2022/A1:2023 E

---------------------- Page: 3 ----------------------
SIST EN IEC 61557-7:2022/A1:2024
EN IEC 61557-7:2022/A1:2023 (E)
European foreword
The text of document 85/872/FDIS, future IEC 61557-7/AMD1, prepared by IEC/TC 85 "Measuring
equipment for electrical and electromagnetic quantities" was submitted to the IEC-CENELEC parallel
vote and approved by CENELEC as EN IEC 61557-7:2022/A1:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-06-29
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-09-29
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prep
...

SLOVENSKI STANDARD
SIST EN IEC 61557-7:2022/oprA1:2022
01-julij-2022
Električna varnost v nizkonapetostnih razdelilnih sistemih za izmenične napetosti
do 1 000 V in enosmerne napetosti do 1 500 V - Oprema za preskušanje, merjenje
ali nadzorovanje zaščitnih ukrepov - 7. del: Fazno zaporedje - Dodatek A1
Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC -
Equipment for testing, measuring or monitoring of protective measures - Part 7: Phase
sequence
Sécurité électrique dans les réseaux de distribution basse tension au plus égale à 1 000
V c.a. et 1 500 V c.c. - Dispositifs de contrôle, de mesure ou de surveillance de mesures
de protection - Partie 7: Ordre de phases
Ta slovenski standard je istoveten z: EN IEC 61557-7:2022/prA1:2022
ICS:
17.220.20 Merjenje električnih in Measurement of electrical
magnetnih veličin and magnetic quantities
29.080.01 Električna izolacija na Electrical insulation in
splošno general
29.240.01 Omrežja za prenos in Power transmission and
distribucijo električne energije distribution networks in
na splošno general
SIST EN IEC 61557-7:2022/oprA1:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 61557-7:2022/oprA1:2022

---------------------- Page: 2 ----------------------
SIST EN IEC 61557-7:2022/oprA1:2022
85/828/CDV

COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61557-7/AMD1 ED3
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-06-03 2022-08-26
SUPERSEDES DOCUMENTS:
85/769/CD, 85/798A/CC

IEC TC 85 : MEASURING EQUIPMENT FOR ELECTRICAL AND ELECTROMAGNETIC QUANTITIES
SECRETARIAT: SECRETARY:
China Ms Guiju HAN
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:

TC 64,TC 78
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.

TITLE:
Amendment 1 - Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500
V DC - Equipment for testing, measuring or monitoring of protective measures - Part 7: Phase
sequence

PROPOSED STABILITY DATE: 2028

NOTE FROM TC/SC OFFICERS:

Copyright © 2022 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.

---------------------- Page: 3 ----------------------
SIST EN IEC 61557-7:2022/oprA1:2022
85/828/CDV – 1 – IEC 61557-7:2019/AMD1© IEC 2022

INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS
UP TO 1 000 V AC. AND 1 500 V DC –
EQUIPMENT FOR TESTING, MEASURING OR MONITORING
OF PROTECTIVE MEASURES –

Part 7: Phase sequence

AMENDMENT 1

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee ha
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.