SIST EN 60893-3-1:2012

Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials - Types of industrial rigid laminated sheets

This part of IEC 60893 provides requirements for various materials. Their properties are given in subsequent Part 3 specification sheets. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.

Isolierstoffe – Tafeln aus technischen Schichtpressstoffen auf der Basis warmhärtender Harze für elektrotechnische Zwecke – Teil 3-1: Bestimmungen für einzelne Werkstoffe – Typen von Tafeln aus technischen Schichtpressstoffen

Matériaux isolants - Stratifiés industriels rigides en planches à base de résines thermodurcissables à usages électriques - Partie 3-1: Spécifications pour matériaux particuliers - Types de stratifiés industriels rigides en planches

La CEI 60893-3-1:2012 indique les exigences des divers matériaux. Leurs propriétés sont données dans les autres feuilles de spécification de la Partie 3. Cette troisième édition annule et remplace la deuxième édition publiée en 2003, et constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: addition de nouveaux types de matériaux conformément à la troisième édition de la CEI 60893-3-2 (en préparation). Mots clé: stratifiés industriels rigides en planches à base de résines.

Izolacijski materiali - Industrijske toge večplastne plošče iz toplotno utrjenih smol za električne namene - 3-1. del: Specifikacije za posamezne materiale - Vrste industrijskih togih večplastnih plošč

Ta del standarda IEC 60893 vključuje zahteve za različne materiale. Njihove lastnosti so navedene na naslednjih straneh specifikacij v 3. delu. Materiali, ki so skladni s to specifikacijo, ustrezajo določenim ravnem delovanja. Vendar mora uporabnik material za specifično uporabo izbrati glede na dejanske zahteve, ki omogočajo ustrezno delovanje pri tej uporabi, in ne samo na podlagi te specifikacije.

General Information

• Status: Published
• Publication Date: 25-Oct-2012
• ICS: 29.035.20 - Plastics and rubber insulating materials
• Technical Committee: IIZS - Insulating materials and systems
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 15-Oct-2012
• Due Date: 20-Dec-2012
• Completion Date: 26-Oct-2012
• Ref Project: EN 60893-3-1:2012 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials - Types of industrial rigid laminated sheets

Relations

• Replaces: SIST EN 60893-3-1:2004 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-1: Specifications for individual materials - Requirements for types of industrial rigid laminated sheets
• Effective Date: 29-Jan-2023
• Revised: SIST EN 60893-3-1:2004 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-1: Specifications for individual materials - Requirements for types of industrial rigid laminated sheets
• Effective Date: 06-May-2014
• Replaces: SIST EN 60893-3-1:2004 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-1: Specifications for individual materials - Requirements for types of industrial rigid laminated sheets
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60893-3-1:2012
01-december-2012
,]RODFLMVNLPDWHULDOL,QGXVWULMVNHWRJHYHþSODVWQHSORãþHL]WRSORWQRXWUMHQLKVPRO
]DHOHNWULþQHQDPHQHGHO6SHFLILNDFLMH]DSRVDPH]QHPDWHULDOH9UVWH
LQGXVWULMVNLKWRJLKYHþSODVWQLKSORãþ
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for
electrical purposes - Part 3-1: Specifications for individual materials - Types of industrial
rigid laminated sheets
Matériaux isolants - Stratifiés industriels rigides en planches à base de résines
thermodurcissables à usages électriques - Partie 3-1: Spécifications pour matériaux
particuliers - Types de stratifiés industriels rigides en planches
Ta slovenski standard je istoveten z: EN 60893-3-1:2012
ICS:
29.035.20 3ODVWLþQLLQJXPHQLL]RODFLMVNL Plastics and rubber insulating
PDWHULDOL materials
SIST EN 60893-3-1:2012 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60893-3-1:2012

---------------------- Page: 2 ----------------------

SIST EN 60893-3-1:2012

EUROPEAN STANDARD
EN 60893-3-1

NORME EUROPÉENNE
September 2012
EUROPÄISCHE NORM

ICS 29.035.01 Supersedes EN 60893-3-1:2004


English version


Insulating materials -
Industrial rigid laminated sheets based on thermosetting resins for
electrical purposes -
Part 3-1: Specifications for individual materials -
Types of industrial rigid laminated sheets
(IEC 60893-3-1:2012)


Matériaux isolants -  Isolierstoffe – Tafeln aus technischen
Stratifiés industriels rigides en planches à Schichtpressstoffen auf der Basis
base de résines thermodurcissables à warmhärtender Harze für
usages électriques - elektrotechnische Zwecke – Teil 3-1:
Partie 3-1: Spécifications pour matériaux Bestimmungen für einzelne Werkstoffe –
particuliers - Typen von Tafeln aus technischen
Types de stratifiés industriels rigides en Schichtpressstoffen
planches (IEC 60893-3-1:2012)
(CEI 60893-3-1:2012)

This European Standard was approved by CENELEC on 2012-08-28. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60893-3-1:2012 E

---------------------- Page: 3 ----------------------

SIST EN 60893-3-1:2012
EN 60893-3-1:2012 - 2 -
Foreword
The text of document 15/606/CDV, future edition 3 of IEC 60893-3-1, prepared by IEC TC 15 "Solid
electrical insulating materials" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 60893-3-1:2012.

The following dates are fixed:
(dop) 2013-05-28
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2015-08-28
• latest date by which the national
standards conflicting with the
document have to be withdrawn

This document supersedes EN 60893-3-1:2004.
EN 60893-3-1:2012 includes the following significant technical changes with respect to EN 60893-3-
1:2004:
− addition of new material types according to EN 60893-3-2.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.

Endorsement notice
The text of the International Standard IEC 60893-3-1:2012 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60893-1 NOTE  Harmonized as EN 60893-1.
IEC 60893-2 NOTE  Harmonized as EN 60893-2.
IEC 60893-3 series NOTE  Harmonized in EN 60893-3 series.

---------------------- Page: 4 ----------------------

SIST EN 60893-3-1:2012
- 3 - EN 60893-3-1:2012

Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 60893-3-2 - Insulating materials - Industrial rigid laminated EN 60893-3-2 -
sheets based on thermosetting resins for
electrical purposes -
Part 3-2: Specifications for individual
materials - Requirements for rigid laminated
sheets based on epoxy resins

---------------------- Page: 5 ----------------------

SIST EN 60893-3-1:2012

---------------------- Page: 6 ----------------------

SIST EN 60893-3-1:2012



IEC 60893-3-1

®


Edition 3.0 2012-07




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE











Insulating materials – Industrial rigid laminated sheets based on thermosetting

resins for electrical purposes –

Part 3-1: Specifications for individual materials – Types of industrial rigid


laminated sheets



Matériaux isolants – Stratifiés industriels rigides en planches à base de résines


thermodurcissables à usages électriques –

Partie 3-1: Spécifications pour matériaux particuliers – Types de stratifiés

industriels rigides en planches










INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE

PRICE CODE
INTERNATIONALE

CODE PRIX K


ICS 29.035.01 ISBN 978-2-83220-216-6



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 60893-3-1:2012
– 2 – 60893-3-1 © IEC:2012
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Abbreviations . 6
4 Types . 7
Bibliography . 10

Table 1 − Types of industrial rigid laminated sheets . 7

---------------------- Page: 8 ----------------------

SIST EN 60893-3-1:2012
60893-3-1 © IEC:2012 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________

INSULATING MATERIALS –
INDUSTRIAL RIGID LAMINATED SHEETS
BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES –

Part 3-1: Specifications for individual materials –
Types of industrial rigid laminated sheets


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of
...