SIST EN ISO 10240:2020
(Main)Small craft - Owner's manual (ISO 10240:2019)
Small craft - Owner's manual (ISO 10240:2019)
This document specifies requirements and information for inclusion in the owner’s manual of small craft to enable the owner/operator to use the craft safely.
Kleine Wasserfahrzeuge - Eignerhandbuch (ISO 10240:2019)
Dieses Dokument legt in das Eignerhandbuch von kleinen Wasserfahrzeugen aufzunehmende Anforderungen und Informationen fest, um dem Eigner/Schiffsführer eine sichere Nutzung des Wasserfahrzeugs zu ermöglichen.
Petits navires - Manuel du propriétaire (ISO 10240:2019)
Le présent document spécifie les exigences et les informations devant être incluses dans le manuel du propriétaire d'un petit navire afin de permettre à leur propriétaire/opérateur de l'utiliser en sécurité.
Mala plovila - Priročnik za uporabo (ISO 10240:2019)
Ta dokument določa zahteve in informacije za vključitev v priročnik za uporabo za mala plovila, ki lastniku/upravljavcu omogoča varno uporabo plovila.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 10240:2020
01-marec-2020
Nadomešča:
SIST EN ISO 10240:2005
SIST EN ISO 10240:2005/A1:2015
Mala plovila - Priročnik za uporabo (ISO 10240:2019)
Small craft - Owner's manual (ISO 10240:2019)
Kleine Wasserfahrzeuge - Eignerhandbuch (ISO 10240:2019)
Petits navires - Manuel du propriétaire (ISO 10240:2019)
Ta slovenski standard je istoveten z: EN ISO 10240:2020
ICS:
47.080 Čolni Small craft
SIST EN ISO 10240:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 10240:2020
---------------------- Page: 2 ----------------------
SIST EN ISO 10240:2020
EN ISO 10240
EUROPEAN STANDARD
NORME EUROPÉENNE
January 2020
EUROPÄISCHE NORM
ICS 47.080 Supersedes EN ISO 10240:2004
English Version
Small craft - Owner's manual (ISO 10240:2019)
Petits navires - Manuel du propriétaire (ISO Kleine Wasserfahrzeuge - Eignerhandbuch (ISO
10240:2019) 10240:2019)
This European Standard was approved by CEN on 12 December 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10240:2020 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 10240:2020
EN ISO 10240:2020 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 10240:2020
EN ISO 10240:2020 (E)
European foreword
This document (EN ISO 10240:2020) has been prepared by Technical Committee ISO/TC 188 "Small
craft" in collaboration with Technical Committee CEN/SS T01 “Shipbuilding and maritime structures”
the secretariat of which is held by CCMC.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by July 2020, and conflicting national standards shall be
withdrawn at the latest by July 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 10240:2004.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 10240:2019 has been approved by CEN as EN ISO 10240:2020 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 10240:2020
---------------------- Page: 6 ----------------------
SIST EN ISO 10240:2020
INTERNATIONAL ISO
STANDARD 10240
Third edition
2019-12
Small craft — Owner's manual
Petits navires — Manuel du propriétaire
Reference number
ISO 10240:2019(E)
©
ISO 2019
---------------------- Page: 7 ----------------------
SIST EN ISO 10240:2020
ISO 10240:2019(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mec
...
SLOVENSKI STANDARD
oSIST prEN ISO 10240:2018
01-december-2018
0DODSORYLOD3ULURþQLN]DXSRUDER,62',6
Small craft - Owner's manual (ISO/DIS 10240:2018)
Petits navires - Manuel du propriétaire (ISO/DIS 10240:2018)
Ta slovenski standard je istoveten z: prEN ISO 10240
ICS:
47.080 ýROQL Small craft
oSIST prEN ISO 10240:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 10240:2018
---------------------- Page: 2 ----------------------
oSIST prEN ISO 10240:2018
DRAFT INTERNATIONAL STANDARD
ISO/DIS 10240
ISO/TC 188 Secretariat: SIS
Voting begins on: Voting terminates on:
2018-10-18 2019-01-10
Small craft — Owner's manual
Petits navires — Manuel du propriétaire
ICS: 47.080
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 10240:2018(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2018
---------------------- Page: 3 ----------------------
oSIST prEN ISO 10240:2018
ISO/DIS 10240:2018(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 10240:2018
ISO/DIS 10240:2018(E)
Contents Page
Foreword .v
Introduction .vii
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 General requirements . 2
4.1 Information required . 2
4.2 Format . 2
4.3 Units and definitions . 3
4.4 Illustrations . 3
5 Content of owner's manual . 3
5.1 General .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.