SIST EN 60034-7:1999/A1:2002

Rotating electrical machines -- Part 7: Classification of types of construction, mounting arrangements and terminal box position (IM Code)

EN following parallel vote

Drehende elektrische Maschinen -- Teil 7: Klassifizierung der Bauarten, der Aufstellungsarten und der Klemmkasten-Lage (IM-Code)

Machines électriques tournantes -- Partie 7: Classification des modes de construction, des dispositions de montage et position de la boîte à bornes (Code IM)

Rotating electrical machines - Part 7: Classification of types of constructions and mounting arrangements (IM-Code) - Amendment A1 (IEC 60034-7:1992/A1:2000)

General Information

• Status: Published
• Publication Date: 31-Aug-2002
• ICS: 29.160.01 - Rotating machinery in general
• Technical Committee: ERS - Rotating machinery
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Sep-2002
• Due Date: 01-Sep-2002
• Completion Date: 01-Sep-2002
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Directive: 73/23/EEC - Electrical equipment designed for use within certain voltage limits
• Ref Project: EN 60034-7:1993/A1:2001 - Rotating electrical machines - Part 7: Classification of types of construction, mounting arrangements and terminal box position (IM Code)

Relations

• Amends: SIST EN 60034-7:1999 - Rotating electrical machines -- Part 7: Classification of types of construction, mounting arrangements and terminal box position (IM Code)
• Effective Date: 28-Jan-2023
• Replaced By: SIST EN IEC 60034-7:2022 - Rotating electrical machines - Part 7: Classification of types of construction, mounting arrangements and terminal box position (IM Code) (IEC 60034-7:2020)
• Effective Date: 29-Mar-2022
• Amends: SIST EN 60034-7:1999 - Rotating electrical machines -- Part 7: Classification of types of construction, mounting arrangements and terminal box position (IM Code)
• Effective Date: 21-Sep-2010
• Amends: SIST EN 60034-7:1999 - Rotating electrical machines -- Part 7: Classification of types of construction, mounting arrangements and terminal box position (IM Code)
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI SIST EN 60034-7:1999/A1:2002
prva izdaja
STANDARD
september 2002
Rotating electrical machines - Part 7: Classification of types of constructions and
mounting arrangements (IM-Code) - Amendment A1 (IEC 60034-7:1992/A1:2000)
ICS 29.160.01 Referenčna številka
SIST EN 60034-7:1999/A1:2002(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 60034-7/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM March 2001
ICS 29.160
English version
Rotating electrical machines
Part 7: Classification of types of construction, mounting arrangements
and terminal box position (IM Code)
(IEC 60034-7:1992/A1:2000)
Machines électriques tournantes Drehende elektrische Maschinen
Partie 7: Classification des modes Teil 7: Klassifizierung der Bauarten,
de construction, des dispositions der Aufstellungsarten und der
de montage et position de la boîte Klemmkasten-Lage (IM-Code)
à bornes (Code IM) (IEC 60034-7:1992/A1:2000)
(CEI 60034-7:1992/A1:2000)
This amendment A1 modifies the European Standard EN 60034-7:1993; it was approved by
CENELEC on 2000-11-01. CENELEC members are bound to comply with the CEN/CENELEC Internal
Regulations which stipulate the conditions for giving this amendment the status of a national standard
without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway,
Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60034-7:1993/A1:2001 E

---------------------- Page: 2 ----------------------

EN 60034-7:1993/A1:2001 - 2 -
Foreword
The text of document 2/1095/FDIS, future amendment 1 to IEC 60034-7:1992, prepared by IEC TC 2,
Rotating machinery, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as amendment A1 to EN 60034-7:1993 on 2000-11-01.
The following dates were fixed:
– latest date by which the amendment has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2001-08-01
– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2003-11-01
__________
Endorsement notice
The text of amendment 1:2000 to the International Standard IEC 60034-7:1992 was approved by
CENELEC as an amendment to the European Standard without any modification.
__________

---------------------- Page: 3 ----------------------

NORME CEI
INTERNATIONALE IEC
60034-7
INTERNATIONAL
1992
STANDARD
AMENDEMENT 1
AMENDMENT 1
2000-09
Amendement 1
Machines électriques tournantes –
Partie 7:
Classification des modes de construction,
des dispositions de montage et position
de la boîte à bornes (Code IM)
Amendment 1
Rotating electrical machines –
Part 7:
Classification of types of construction,
mounting arrangements and
terminal box position (IM Code)
 IEC 2000 Droits de reproduction réservés  Copyright - all rights reserved
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: [phone] e-mail: [e-mail] IEC web site http://www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
F
PRICE CODE
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 4 ----------------------

60034-7 © Amend. 1 © IEC:2000 – 3 –
FOREWORD
This amendment has been prepared by IEC technical committee 2: Rotating machinery.
The text of this amendment is based on the following documents:
FDIS Report on voting
2/1095/FDIS 2/1099/RVD
Full information on the voting for the approval of this amendment can be found in the report on
voting indicated in the above table.
The committee has decided that the contents of the base publication and its amendment will
remain unchanged until
...