oSIST prEN 3490:2024

Aerospace series - Steel X15CrNi17-3 (1.4057) - Air melted - Hardened and tempered - Bars for machining - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 100 MPa

This document specifies the requirements relating to:
Steel X15CrNi17-3 (1.4057)
Air melted
Hardened and tempered
Bars for machining
De ≤ 200 mm
900 MPa ≤  Rm ≤ 1 100 MPa
for aerospace applications.
NOTE   ASD-STAN designation: FE-PM3901
Material number: 1.4057

Luft- und Raumfahrt - Stahl X15CrNi17-3 (1.4057) - Lufterschmolzen - Gehärtet und angelassen - Stangen zur spanenden Bearbeitung - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 100 MPa

No Scope available

Série aérospatiale - Acier X15CrNi17-3 (1.4057) - Élaboré à l’air - Trempé et revenu - Barres pour usinage - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 100 MPa

No Scope available

Aeronavtika - Jeklo X15CrNi17-3 (1.4057) - Taljeno - Utrjeno in mehko žarjeno - Palice za obdelavo - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 100 MPa

General Information

• Status: Not Published
• Public Enquiry End Date: 18-Sep-2024
• ICS: 49.025.10 - Steels
• ICS: 77.140.60 - Steel bars and rods
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 15-Jul-2024
• Due Date: 02-Dec-2024
• Ref Project: prEN 3490 - Aerospace series - Steel X15CrNi17-3 (1.4057) - Air melted - Hardened and tempered - Bars for machining - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 100 MPa

Relations

• Revises: SIST EN 3490:2009 - Aerospace series - Steel FE-PM3901 (X15CrNi17-3) - Air melted - Hardened and tempered - Bar for machining - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 100 MPa
• Effective Date: 22-May-2024

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2024
Aeronavtika - Jeklo X15CrNi17-3 (1.4057) - Taljeno - Utrjeno in mehko žarjeno -
Palice za obdelavo - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 100 MPa
Aerospace series - Steel X15CrNi17-3 (1.4057) - Air melted - Hardened and tempered -
Bars for machining - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 100 MPa
Luft- und Raumfahrt - Stahl X15CrNi17-3 (1.4057) - Lufterschmolzen - Gehärtet und
angelassen - Stangen zur spanenden Bearbeitung - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1
100 MPa
Série aérospatiale - Acier X15CrNi17-3 (1.4057) - Élaboré à l’air - Trempé et revenu -
Barres pour usinage - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 100 MPa
Ta slovenski standard je istoveten z: prEN 3490
ICS:
49.025.10 Jekla Steels
77.140.60 Jeklene palice in drogovi Steel bars and rods
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2024
ICS 49.025.10 Will supersede EN 3490:2007
English Version
Aerospace series - Steel X15CrNi17-3 (1.4057) - Air
melted - Hardened and tempered - Bars for machining –
De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 100 MPa
Série aérospatiale - Acier X15CrNi17-3 (1.4057) - Luft- und Raumfahrt - Stahl X15CrNi17-3 (1.4057) -
Élaboré à l'air - Trempé et revenu - Barres pour Lufterschmolzen - Gehärtet und angelassen - Stangen
usinage - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 100 MPa zur spanenden Bearbeitung - De ≤ 200 mm - 900 MPa ≤
Rm ≤ 1 100 MPa
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N

EUROPÄISCHES KOMITEE FÜR NORMUN G

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 3490:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 9
European foreword
This document (prEN 3490:2024) has been prepared by ASD-STAN.
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 3490:2007.
...