Name: SIST EN 792-10:2000
Brand: SIST
SKU: 92552ec3-97d2-444d-8985-1333c9827a53
Price: 66.46 USD
Availability: InStock
Rating: 5 (13 reviews)

Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools

The standard EN 792 applies to non-electric hand-held power tools driven by rotary or linear motors, powered by compressed air, hydraulic fluid and intended to be used by one operator and supported by: - the operator's hand or hands; - a suspension, e.g. a balancer. This Part, EN 792-10, applies to hand-held non-electric compression power tools with yoke, e.g. for squeeze riveting, punching, shaping, pressing and cutting of metal, plastics or other materials.

Handgehaltene nicht-elektrisch betriebene Maschinen - Sicherheitsanforderungen - Teil 10: Maschinen zum Pressen

Die Norm EN 792 gilt für handgehaltene nicht-elektrisch betriebene Maschinen, die durch Motore mit drehender oder linearer Bewegung angetrieben werden, wobei die Energie aus Druckluft oder über Hydraulikflüssigkeit bezogen werden kann. Die Maschinen sind dazu bestimmt, durch eine Person verwendet und - mit einer oder beiden Händen gehalten, - in einer Halterung, z.B. Aufhängevorrichtung, aufgenommen zu werden.

Machines portatives a moteur non électrique - Prescriptions de sécurité - Partie 10: Machines portatives a compression

La norme EN 792 s'applique aux machines portatives non électriques entraînées par des moteurs rotatifs ou linéaires, alimentés par air comprimé, fluide hydraulique et prévues pour etre utilisées par un seul opérateur et portée par: - la ou les main(s) de l'opérateur, - en suspension, p.e. a l'aide d'un équilibreur. Cette, EN 792-10, s'applique aux machines portatives non électriques a compression utilisées pour (squeeze) river, poinçonner, former, presser le métal, la matiere plastique ou d'autres matériaux.

Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools

General Information

Status

Withdrawn

Publication Date

30-Nov-2000

Withdrawal Date

12-Oct-2008

ICS

25.140.10 - Pneumatic tools

Technical Committee

I13 - Imaginarni 13

Current Stage

9900 - Withdrawal (Adopted Project)

Start Date

03-Oct-2008

Due Date

26-Oct-2008

Completion Date

13-Oct-2008

Directive

98/37/EC - Machinery

Mandate

M/BC/CEN/88/13 - Standardization request to CEN/CENELEC relating to machinery

Ref Project

EN 792-10:2000 - Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools

Relations

Consolidated By

SIST EN 792-10:2000+A1:2008 - Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools

Effective Date

18-Jan-2023

Consolidated By

SIST EN 792-10:2000+A1:2008 - Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools

Effective Date

19-Jan-2023

Consolidated By

SIST EN 792-10:2000+A1:2008 - Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools

Effective Date

01-Nov-2008

Buy Standard

Standard

EN 792-10:2000

English language

18 pages

sale 10% off

Preview

sale 10% off

Preview

e-Library read for

1 day

Standards Content (Sample)

EN 792-10:2000

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hand-held non-electric power tools - Safety requirements - Part 10: Compression power toolsHandgehaltene nicht-elektrisch betriebene Maschinen - Sicherheitsanforderungen - Teil 10: Maschinen zum PressenMachines portatives a moteur non électrique - Prescriptions de sécurité - Partie 10: Machines portatives a compressionHand-held non-electric power tools - Safety requirements - Part 10: Compression power tools25.140.10Pneumatic toolsICS:Ta slov
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST

SIST EN ISO 11148-13:2019(Main)

Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools (ISO 11148-13:2017)

EN ISO 11148-13:2018

This standard applies to hand-held non-electric power tools driven by rotary or linear motors, powered by compressed air, hydraulic fluid or internal combustion engines and intended to be used by one operator and supported by: - the operator's hand or hands or a suspension, e. g. a balancer. - hand-held tools which are intended to be capable of being fixtured.

Standard
55 pages
English language
sale 10% off
e-Library read for
1 day
Draft
56 pages
English language
sale 10% off
e-Library read for
1 day

29-Apr-2015
10-Dec-2018
25.140.10
2006/42/EC
M/396
I13

SIST

SIST EN ISO 11148-4:2013(Main)

Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools (ISO 11148-4:2012)

EN ISO 11148-4:2012

This part of ISO 11148 applies to hand-held non-electric power tools (hereinafter “non-rotary percussive power tools”) intended for chipping, riveting, breaking of concrete and asphalt, ramming, etc. The non-rotary percussive power tool can be powered by compressed air, hydraulic fluid or internal combustion engines and is intended for use by one operator and supported by the operator’s hand or hands, with or without a suspension, e.g. a balancer.
This part of ISO 11148 covers
- breakers;
- bush hammers;
- chipping hammers;
- small chisels;
- engraving pens;
- needle scalers;
- pick hammers;
- pile drivers;
- portable pile drivers;
-punches;
- rammers;
- riveting hammers;
- scaling hammers;
- stone hammers
- spades;
- tampers.
NOTE 1 For examples of non-rotary percussive power tools, see Annex B.
This part of ISO 11148 does not cover special requirements and modifications on non-rotary percussive power tools for the purpose of mounting in a fixture. This part of ISO 11148 deals with all significant hazards, hazardous situations or hazardous events when the tools are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of non-rotary percussive power tools in potentially explosive atmospheres.
NOTE 2 EN 13463-1 gives requirements for non-electrical equipment for potentially explosive atmospheres.

Standard
38 pages
English language
sale 10% off
e-Library read for
1 day

SIST

SIST EN ISO 11148-6:2013(Main)

Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2012)

EN ISO 11148-6:2012

This part of ISO 11148 applies to hand-held non-electric power tools (hereinafter "assembly power tools for threaded fasteners") intended for tightening or installing of threaded fasteners. The assembly power tools for threaded fasteners can be powered by compressed air, hydraulic fluid or internal combustion engines and are intended for use by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer. This part of ISO 11148 covers - air-hydraulic impulse wrenches; - impact wrenches; - fastener installation tools; - nutrunners; - open-ended spanners (crow-foot with open-ended socket or tube nut wrench); - ratchet wrenches; - screwdrivers. This part of ISO 11148 does not cover special requirements and modifications of assembly power tools for threaded fasteners for the purpose of mounting them in fixtures. This part of ISO 11148 deals with all significant hazards, hazardous situations or hazardous events when the tools are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of assembly power tools for threaded fasteners in potentially explosive atmospheres.

Standard
39 pages
English language
sale 10% off
e-Library read for
1 day

SIST

SIST EN ISO 11148-3:2013(Main)

Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers (ISO 11148-3:2012)

EN ISO 11148-3:2012

This part of ISO 11148 applies to hand-held non-electric power tools (hereinafter "drills and tappers") intended for rotary drilling of holes in all kinds of material, e.g. wood, metal, concrete and plastics, or for tapping and cleaning threads in metal and plastics. The drills and tappers can be powered by compressed air, hydraulic fluid or internal combustion engines and are intended for use by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer. This part of ISO 11148 is applicable to - drills; - heavy duty drills with two handles; - tappers. This part of ISO 11148 is not applicable to special requirements and modifications of drills and tappers for the purpose of mounting them in fixtures. This part of ISO 11148 deals with all significant hazards, hazardous situations or hazardous events when drills and tappers are used as intended and under conditions of misuse that are reasonably foreseeable by the manufacturer, with the exception of their use in potentially explosive atmospheres.

Standard
36 pages
English language
sale 10% off
e-Library read for
1 day

SIST

SIST EN ISO 11148-12:2013(Main)

Hand-held non-electric power tools - Safety requirements - Part 12: Circular, oscillating and reciprocating saws (ISO 11148-12:2012)

EN ISO 11148-12:2012

This part of ISO 11148 specifies safety requirements for hand-held non-electric power tools (hereinafter "circular, oscillating and reciprocating saws") intended for sawing. The circular, oscillating and reciprocating saws can be powered by compressed air, hydraulic fluid or internal combustion engines and are intended to be used by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer. This part of ISO 11148 is applicable to - circular saws; - circular knives; - oscillating saws having a saw blade with a radius of 50 mm or less or a diamond cutting-off blade with a radius of 100 mm or less; - oscillating knives (including windshield knives); - reciprocating saws, including jig saws and power hack saws. This part of ISO 11148 is not applicable to special requirements and modifications of circular, oscillating and reciprocating saws for the purpose of mounting them in fixtures. This part of ISO 11148 deals with all significant hazards, hazardous situations or hazardous events relevant to circular, oscillating and reciprocating saws when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of circular, oscillating and reciprocating saws in potentially explosive atmospheres.

Standard
39 pages
English language
sale 10% off
e-Library read for
1 day

14-May-2010
03-Apr-2013
25.140.10
2006/42/EC
M/396
I13

SIST

SIST EN ISO 11148-7:2012(Main)

Hand-held non-electric power tools - Safety requirements - Part 7: Grinders (ISO 11148-7:2012)

EN ISO 11148-7:2012

This part of ISO 11148 specifies safety requirements for hand-held non-electric power tools (hereinafter “grinders”) intended for grinding and cutting-off with abrasive products, for use on all kinds of materials. The grinders can be powered by compressed air or hydraulic fluid and are intended to be used by one operator and supported by the operator’s hand or hands, with or without a suspension, e.g. a balancer. NOTE 1 At the time of publication, no grinders driven by internal combustion engines are known (other than cuttingoff machines within the scope of ISO 19432). Once these are identified, it is intended to amend this part of ISO 11148 to
include such power tools. This part of ISO 11148 is applicable to grinders used with:
— abrasive products with a peripheral operating speed less than or equal to 80 m/s;
— cutting-off wheels with a peripheral operating speed less than or equal to 100 m/s;
— abrasive products with an outside nominal diameter less than or equal to 230 mm;
— cutting-off wheels with an outside nominal diameter less than or equal to 250 mm;
— wire brushes;
— diamond and reinforced (segmented) wheels with an outside nominal diameter less than or equal to 450 mm;
— flap discs and flap wheels.
NOTE 2 For examples of grinders, see Annex B.
NOTE 3 Typical abrasive products used together with hand-held grinders are listed in Annex D.
This part of ISO 11148 does not cover special requirements and modifications of grinders for the purpose of mounting them in fixtures. This part of ISO 11148 is not applicable to:
— die grinders with collets, which are treated in ISO 11148-9;
— polishers and sanders (i.e. tools used with coated abrasives except flap discs and flap wheels), which are treated in ISO 11148-8;
— cutting-off machines which are driven by internal combustion engines and are used for cutting construction materials, which are treated in ISO 19432;
— shaft-mounted wire brushes, which are treated in ISO 11148-9.
This part of ISO 11148 deals with all significant hazards, hazardous situations or hazardous events relevant to grinders when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of grinders in potentially explosive atmospheres. NOTE 4 EN 13463-1 gives requirements for non-electrical equipment for potentially explosive atmospheres.