oSIST prEN 12976-2:2012

Thermal solar systems and components - Factory made systems - Part 2: Test methods

This European Standard specifies test methods for validating the requirements for Factory Made Thermal Solar Heating Systems as specified in prEN 12976-1. The standard also includes two test methods for thermal performance characterization by means of whole system testing.

Thermische Solaranlagen und ihre Bauteile - Vorgefertigte Anlagen - Teil 2: Prüfverfahren

Diese Europäische Norm legt Verfahren für die Prüfung der Erfüllung der Anforderungen für vorgefertigte thermische Solaranlagen fest, wie sie in prEN 12976-1 angegeben sind. Die Norm enthält auch zwei Prüfverfahren zur Charakterisierung der Wärmeleistung durch Prüfung der Gesamtanlage.

Installations solaires thermiques et leurs composants - Installations préfabriquées en usine - Partie 2: Méthodes d’essai

La présente Norme européenne spécifie des méthodes d’essai permettant de valider les exigences
applicables aux installations de chauffage solaire thermique préfabriquées en usine, telles que spécifiées
dans le prEN 12976-1. La norme comprend également deux méthodes d’essai pour la caractérisation des
performances thermiques de l’installation dans son ensemble.

Toplotni sončni sistemi in sestavni deli - Industrijsko izdelani sistemi - 2. del: Preskusne metode

General Information

• Status: Not Published
• Public Enquiry End Date: 30-May-2012
• ICS: 27.160 - Solar energy engineering
• Technical Committee: TOP - Thermal insulation
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 07-Oct-2013
• Due Date: 12-Oct-2013
• Completion Date: 07-Oct-2013
• Ref Project: prEN 12976-2 - Thermal solar systems and components - Factory made systems - Part 2: Test methods

Relations

• Revised: SIST EN 12976-2:2006 - Thermal solar systems and components - Factory made systems - Part 2: Test methods
• Effective Date: 27-Feb-2010
• Revised: SIST EN 12976-2:2006 - Thermal solar systems and components - Factory made systems - Part 2: Test methods
• Effective Date: 18-Jan-2023
• Revised: SIST EN 12976-2:2006 - Thermal solar systems and components - Factory made systems - Part 2: Test methods
• Effective Date: 19-Jan-2023
• Revised: SIST EN 12976-2:2006 - Thermal solar systems and components - Factory made systems - Part 2: Test methods
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 12976-2:2012
01-april-2012
7RSORWQLVRQþQLVLVWHPLLQVHVWDYQLGHOL,QGXVWULMVNRL]GHODQLVLVWHPLGHO
3UHVNXVQHPHWRGH
Thermal solar systems and components - Factory made systems - Part 2: Test methods
Thermische Solaranlagen und ihre Bauteile - Vorgefertigte Anlagen - Teil 2:
Prüfverfahren
Installations solaires thermiques et leurs composants - Installations préfabriquées en
usine - Partie 2: Méthodes d’essai
Ta slovenski standard je istoveten z: prEN 12976-2
ICS:
27.160 6RQþQDHQHUJLMD Solar energy engineering
oSIST prEN 12976-2:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 12976-2:2012

---------------------- Page: 2 ----------------------
oSIST prEN 12976-2:2012


EUROPEAN STANDARD
DRAFT
prEN 12976-2
NORME EUROPÉENNE

EUROPÄISCHE NORM

February 2012
ICS 27.160 Will supersede EN 12976-2:2006
English Version
Thermal solar systems and components - Factory made
systems - Part 2: Test methods
Installations solaires thermiques et leurs composants - Thermische Solaranlagen und ihre Bauteile - Vorgefertigte
Installations préfabriquées en usine - Partie 2: Méthodes Anlagen - Teil 2: Prüfverfahren
d'essai
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 312.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12976-2:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 12976-2:2012
prEN 12976-2:2012 (E)
Contents Page
Foreword .4
Introduction .5
1 Scope .7
2 Normative references .7
3 Terms and definitions .7
4 Symbols and abbreviations .7
5 Testing .8
5.1 Freeze resistance .8
5.1.1 General .8
5.1.2 Systems using antifreeze fluid .8
5.1.3 Drain-back systems .8
5.1.4 Drain-down systems .9
5.1.5 Freeze protection and control functions combined .9
5.1.6 Other systems .9
5.2 Over temperature protection . 10
5.2.1 Purpose . 10
5.2.2 Apparatus . 10
5.2.3 Procedure . 10
5.2.4 Reporting requirements . 11
5.3 Pressure resistance . 11
5.3.1 Purpose . 11
5.3.2 Apparatus . 11
5.3.3 Safety precaution . 11
5.3.4 Procedure . 12
5.3.5 Reporting requirements . 12
5.4 Water contamination . 13
5.5 Lightning protection . 13
5.6 Safety equipment . 13
5.6.1 Safety valves . 13
5.6.2 Safety lines and expansion lines . 13
5.6.3 Blow-off lines . 13
5.7 Labelling . 13
5.8 Thermal performance characterisation . 14
5.8.1 Introduction . 14
5.8.2 Test procedure . 14
5.8.3 Prediction of yearly performance indicators . 15
5.9 Ability of solar-plus-supplementary systems to cover the load . 19
5.9.1 General . 19
5.9.2 Boundary conditions for auxiliary heating . 19
5.9.3 Boundary conditions for daily load . 20
5.9.4 Determination of the ability to cover the maximum daily load by means of testing the
system . 20
5.9.5 Determination of the ability to cover the maximum daily load by means of numerical
simulations . 21
5.10 Reverse flow protection . 21
5.11 Electrical safety. 21
2

---------------------- Page: 4 ----------------------
oSIST prEN 12976-2:2012
prEN 12976-2:2012 (E)
Annex A (normative) Thermal performance presentation sheet . 22
Annex B (normative) Reference conditions for performance prediction . 24
B.1 General . 24
B.2 Pipe diameter and insulation thickness . 26
B.3 Calculation of cold water temperature at reference location. 27
Annex C (informative) Extreme climate test procedure for the assessment of the frost resistance
of solar DHW systems with outdoor storage tank or systems using heat transfer fluid with
the risk of freezing . 29
C.1 Indoor and outdoor test procedure for assessment of the frost resistance of solar DWH
systems with outdoor storage tank or system using heat transfer fluid with the risk of
freezing . 29
C.1.1 Objective and applicability . 29
C.1.2 Apparatus and mounting of the system . 29
C.1.3 Test procedure . 30
 Test conditions — . 31
C.1.4 Determination of the test conditions for freezing period . 31
C.1.5 Results . 31
C.2 Indoor test procedure for assessment of the reliability of solar DWH systems in respect
of overheating protection . 32
C.2.1 Objective and applicability . 32
C.2.2 Apparatus and mounting of the system . 32
C.2.3 Test procedure . 34
C.2.4 Test conditions . 35
C.2.5 Results . 36
Annex D (informative) Ageing test for thermostatic valves . 38
D.1 General . 38
D.2 Test arrangement . 38
D.3 Test Procedure . 39
D.4 Results . 39
Annex E (informative) Lightning protection test for solar heating systems . 40
E.1 Field of application . 40
E.2 Purpose . 40
E.3 Requirements . 40
E.4 Apparatus . 41
E.5 Test procedure . 41
E.5.1 Test conditions . 41
E.5.2 Solar heating system installation . 41
E.5.3 Separation distance S . 41
t
E.5.4 Size of the bonding cable or strip . 42
E.5.5 Bridging between tank and supports . 42
E.5.6 Bridging between collectors and supports . 42
E.5.7 Bridging between collectors and tank . 42
E.5.8 Connecting terminal with Lightning Protection System (LPS) . 42
E.5.9 Metal sheets covering parts of the solar heating system . 42
E.5.10 Heating effects due to lightning currents . 42
E.5.11 Mechanical durability due to lightning mechanical loads . 42
E.6 Report . 43
E.7 Conclusions . 43
Annex F (informative) Lightning Protection testing sheet . 44
Bibliography . 48

3

---------------------- Page: 5 ----------------------
oSIST prEN 12976-2:2012
prEN 12976-2:2012 (E)
Foreword
This document (prEN 12976-2:2012) has been prepared by Technical Committee CEN/TC 312 “Thermal solar
systems and components”, the secretariat of which is held by ELOT.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 12976-2:2006.
4

---------------------- Page: 6 ----------------------
oSIST prEN 12976-2:2012
prEN 12976-2:2012 (E)
Introduction
Drinking water quality
In respect of potential adverse effects on the quality of water intended for human consumption, caused by the
product covered by this standard:
a) This standard provides no information as to whether the product may be used without restriction in any of
the Member States of the EU or EFTA;
b) It should be noted that, while awaiting the adoption of verifiable European criteria, existing national
regulations concerning the use and/or the characteristics of this product remain in force.
Factory Made and Custom Built solar heating systems
The standards prEN 12976-1, prEN 12976-2, CEN/TS 12977-1, CEN/TS 12977-2, EN 12977-3, CEN/TS 12977-4
and CEN/TS 12977-5 distinguish two categories of solar heating systems: Factory Made solar heating systems
and Custom Built solar heating systems. The classification of a system as Factory Made or Custom Built is a
choice of the final supplier, in accordance with the following definitions:
Factory Made solar heating systems are batch products with one trade name, sold as complete and ready
to install kits, with fixed configurations. Systems of this category are considered as a single product and
assessed as a whole.
If a Factory Made Solar Heating System is modified by changing its configuration or by changing one or more
of its components, the modified system is considered as a new system for which a new test report is
necessary. Requirements and test methods for Factory Made solar heating systems are given in
prEN 12976-1 and prEN 12976-2.
Custom Built solar heating systems are either uniquely built, or assembled by choosing from an assortment
of components. Systems of this category are regarded as a set of components. The components are
separately tested and test results are integrated to an assessment of the whole system. Requirements for
Custom Built solar heating systems are given in CEN/TS 12977-1; test methods are specified in
CEN/TS 12977-2 and EN 12977-3.
Custom Built solar heating systems are subdivided into two categories:
 Large Custom Built systems are uniquely designed for a specific situation. In general HVAC engineers,
manufacturers or other experts design them.
 Small Custom Built systems offered by a company are described in a so-called assortment file, in
which all components and possible system configurations, marketed by the company, are specified. Each
possible combination of a system configuration with components from the assortment is considered as
one Custom Built system.
5

---------------------- Page: 7 ----------------------
oSIST prEN 12976-2:2012
prEN 12976-2:2012 (E)
Table 1 shows the division for different system types:
Table 1 — Division for factory made and custom built solar heating systems
Factory Made Solar Heating Systems Custom Built Solar Heating Systems
(prEN 12976-1 & prEN 12976-2) (CEN/TS 12977-1, CEN/TS 12977-2 & EN 12977-3)
Integral collector-storage systems for domestic hot
Forced-circulation systems for hot water preparation
water preparation
and/or space heating, assembled using components
and configurations described in a documentation file
Thermosiphon systems for domestic hot water
(mostly small systems)
preparation
Uniquely designed and assembled systems for hot
Forced-circulation systems as batch product with
water preparation and/or space heating (mostly large
fixed configuration for domestic hot water preparation
systems)

NOTE 1 Forced circulation systems can be classified either as Factory Made or as Custom Built, depending on the
market approach chosen by the final supplier.
NOTE 2 Both Factory Made and Custom Built systems are performance tested under the same set of reference
conditions as specified in Annex B of the present standard and CEN/TS 12977-2:2010, Annex A. In practice, the instal-
lation conditions may differ from these reference conditions.
NOTE 3 A Factory Made system for domestic hot water preparation may have an option for space heating, however
this option should not be used or considered during testing as a Factory Made system.
6

---------------------- Page: 8 ----------------------
oSIST prEN 12976-2:2012
prEN 12976-2:2012 (E)
1 Scope
This European Standard specifies test methods for validating the requirements for Factory Made Thermal
Solar Heating Systems as specified in prEN 12976-1. The standard also includes two test methods for thermal
performance characterization by means of whole system testing.
2 Normative references
The following referenced documents are indispensable for the application of this European Standard. For
dated references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
EN 12975-2:2006, Thermal solar systems and components — Solar collectors — Part 2: Test methods
prEN 12976-1:2012, Thermal solar systems and components — Factory made systems — Part 1: General
requirements
CEN/TS 12977-2:2010, Thermal solar systems and components — Custom built systems — Part 2: Test methods
EN 60335-1, Household and similar electrical appliances — Safety — Part 1: General requirements
(IEC 60335-1)
EN 60335-2-21, Household and similar electrical appliances — Safety — Part 2-21: Particular requirements
for storage water heaters (IEC 60335-2-21)
EN ISO 9488:1999, Solar energy — Vocabulary (ISO 9488:1999)
ISO 9459-1:1993, Solar heating — Domestic water heating systems — Part 1: Performance rating procedure
using indoor test methods
ISO 9459-2:1995, Solar heating — Domestic water heating systems — Part 2: Outdoor test methods for
system performance characterization and yearly performance prediction of solar-only systems
ISO 9459-5:2007, Solar heating — Domestic water heating systems — Part 5: System performance
characterization by means of whole-system tests and computer simulation
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN ISO 9488:1999 and
prEN 12976-1:2012 apply.
4 Symbols and abbreviations
Q net auxiliary energy demand of a solar heating system delivered by the auxiliary heater to the
aux, net
store or directly to the distribution system (see 5.8.3.2)
Q heat demand
d
Q energy delivered at the outlet of the solar heating system
L
Q parasitic energy (electricity) for the collector loop pump(s) and control unit
par
7

---------------------- Page: 9 ----------------------
oSIST prEN 12976-2:2012
prEN 12976-2:2012 (E)
H hemispherical solar irradiation in the collector plane
c
Q store heat loss
l
Q heat diverted from the store as active overheating protection, if any
ohp
Q heat delivered by the collector loop to the store
sol
5 Testing
5.1 Freeze resistance
5.1.1 General
The following checks are given to ensure that the protective antifreezing provisions are operating properly.
There are many possible forms of protective provisions, and the testing authority shall first identify which
method has been employed.
The provision shall then be checked in accordance with the appropriate section of the following list (see 5.1.2
to 5.1.6) in accordance with the manufacturer’s recommendations.
5.1.2 Systems using antifreeze fluid
The system components which are exposed to low ambient temperature are filled with an antifreeze fluid,
usually a glycol/water mixture, having a low enough freezing point.
For these systems, no freezing test is performed. However, if no sufficient data is available on the freezing
point of the antifreeze fluid, the freezing point shall be measured and checked against the minimum system
temperature as given by the manufacturer.
NOTE In general, the minimum allowed temperature of the system is equal to the freezing point of the antifreeze fluid.
If the concentration of some antifreeze fluids - like glycol’s - exceeds a certain limit, they can freeze without damaging the
system. In this case the minimum allowed temperature can be lower than the freezing point of the antifreeze fluid.
Check the freezing point by measuring the glycol concentration (e.g. using a portable refractometer) before
and after the over temperature protection test (5.2). The freezing point shall not differ more than 2 K.from the
value recommended by the manufacturer in agreement with the local climate (minimum expected air
temperature, radiative cooling of the collectors).
The composition of the fluid shall be checked to see whether it is in accordance with the manufacturer’s
specifications.
5.1.3 Drain-back systems
The fluid in the system components, which are exposed to low ambient temperature, is drained into a storage
vessel for subsequent reuse when freezing danger occurs.
The collector loop piping should be in accordance with the manufacturer’s recommendations in the installer
manual and if there is no instruction, according to reference conditions given in Annex B.
Filling may be observed from the pressure gauge or from water level indicator. Switch the pump on, and
observe the pressure gauge or water level indicator. If the system does not include a pressure gauge or level
indicator, other means for checking filling provided by the manufacturer shall be used in accordance with the
instruction manual.
8

---------------------- Page: 10 ----------------------
oSIST prEN 12976-2:2012
prEN 12976-2:2012 (E)
Drain-back may be observed from the decreasing reading of the pressure gauge or water level indicator.
Switch the pump OFF, and observe the pressure gauge or water level indicator. If the system does not include
a pressure gauge or level indicator, other means for checking drain-back provided by the manufacturer shall
be used in accordance with the instruction manual.
A system in which components and/or piping are subject to damage by freezing shall have the proper fittings,
pipe slope and collector design to allow for manual gravity draining and air filling of the affected components
and piping. Pipe slope for gravity draining shall be as the manufacturer recommendation or shall have a
minimum 2 cm vertical drop for each meter of horizontal length. This also applies to any header pipes or
absorber plate riser tubes internal to the collector.
5.1.4 Drain-down systems
The fluid in the system components, which are exposed to low ambient temperature, is drained and run to
waste when freezing danger occurs.
To perform checks of the drain-down function the collector loop piping should be in accordance with the
manufacturer’s recommendations in the installer manual and if there is no instruction, according to reference
conditions given in Annex B.
In most cases the systems are equipped with a drain-down valve at the bottom and a vacuum relief valve at
the top of the fluid circuit.
The proper opening and closing of the vacuum relief valve shall be checked during drain-down operation and
after re-filling the system.
If there is a solenoid drain valve independent of the control unit, simulate the opening temperature.
If there is a non-electrically operated freeze-protection valve, a check can be made using a freezing spray.
The temperature-sensing element shall be sprayed. The measured temperature of the valve opening is to be
compared with the nominal value given by the manufacturer. It is important that the sensing part of the freeze-
protection valve be properly placed.
If the system uses an electrically operated freeze-protection valve, drain down shall be checked while
interrupting the power.
The drain-down rate shall be measured (e.g. by using a vessel and a stop-watch) and documented during
drain-down operation.
5.1.5 Freeze protection and control functions combined
For systems where the freeze-protection and control functions are combined, the control unit shall be checked
as follows:
Set the simulated temperature of the freeze-protection sensor to a value deactivating the freeze protection.
Decrease the simulated temperature slowly. M
...