SIST EN 13523-20:2012

Coil coated metals - Test methods - Part 20: Foam adhesion

This part of EN 13523 describes a laboratory method for testing foam adhesion to an organic coating on a metallic substrate under dry and wet conditions.

Bandbeschichtete Metalle - Prüfverfahren - Teil 20: Haftfestigkeit von Schaum

Dieser Teil von EN 13523 legt ein Verfahren zum Prüfen der Haftfestigkeit von Schaum auf einer organischen Beschichtung auf einem metallischen Substrat im trockenen und im nassen Zustand fest.

Tôles prélaqués - Méthodes d'essais - Partie 20: Adhérence des mousses

La présente Norme européenne décrit une méthode d'essai en laboratoire permettant de déterminer l'adhérence des mousses à un revêtement organique recouvrant un subjectile métallique, dans des conditions sèches et dans des conditions humides.

Kovine, prevlečene v svitkih - Preskusne metode - 20. del: Oprijemljivost pene

Ta del standarda EN 13523 opisuje laboratorijsko metodo za preskušanje oprijemljivosti pene na organski premaz na kovinski podlagi pod suhimi in mokrimi pogoji.

General Information

• Status: Withdrawn
• Public Enquiry End Date: 24-Nov-2010
• Publication Date: 09-Jan-2012
• Withdrawal Date: 23-Jul-2020
• ICS: 25.220.60 - Organic coatings
• Technical Committee: IBLP - Paints and varnishes
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 22-Jul-2020
• Due Date: 14-Aug-2020
• Completion Date: 24-Jul-2020
• Ref Project: EN 13523-20:2011 - Coil coated metals - Test methods - Part 20: Foam adhesion

Relations

• Replaced By: SIST EN 13523-20:2020 - Coil coated metals - Test methods - Part 20: Foam adhesion
• Effective Date: 01-Sep-2020
• Replaced By: SIST EN 13523-20:2020 - Coil coated metals - Test methods - Part 20: Foam adhesion
• Effective Date: 08-Jun-2022
• Replaces: SIST EN 13523-20:2005 - Coil coated metals - Test methods - Part 20: Foam adhesion
• Effective Date: 01-Feb-2012

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bandbeschichtete Metalle - Prüfverfahren - Teil 20: Haftfestigkeit von SchaumTôles prélaqués - Méthodes d'essais - Partie 20: Adhérence des moussesCoil coated metals - Test methods - Part 20: Foam adhesion25.220.60Organske prevlekeOrganic coatingsICS:Ta slovenski standard je istoveten z:EN 13523-20:2011SIST EN 13523-20:2012en,fr,de01-februar-2012SIST EN 13523-20:2012SLOVENSKI
STANDARDSIST EN 13523-20:20051DGRPHãþD



SIST EN 13523-20:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13523-20
December 2011 ICS 25.220.60 Supersedes EN 13523-20:2004English Version
Coil coated metals - Test methods - Part 20: Foam adhesion
Tôles prélaquées - Méthodes d'essai - Partie 20: Adhérence des mousses
Bandbeschichtete Metalle - Prüfverfahren - Teil 20: Haftfestigkeit von Schaum This European Standard was approved by CEN on 15 October 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13523-20:2011: ESIST EN 13523-20:2012



EN 13523-20:2011 (E) 2 Contents Page Foreword . 31Scope . 52Normative references . 53Terms and definitions . 54Material . 55Principle . 56Apparatus . 57Sampling . 58Test specimens . 69Procedure . 69.1Preparation . 69.2Adhesion testing . 69.2.1Dry adhesion . 69.2.2Wet adhesion . 610Expression of results . 611Precision . 612Test report . 7Bibliography . 8 SIST EN 13523-20:2012



EN 13523-20:2011 (E) 3 Foreword This document (EN 13523-20:2011) has been prepared by Technical Committee CEN/TC 139 “Paints and varnishes”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2012, and conflicting national standards shall be withdrawn at the latest by June 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13523-20:2004. EN 13523, Coil coated metals — Test methods, consists of the following parts:  Part 0: General introduction and list of test methods;  Part 1: Film thickness;  Part 2: Specular gloss;  Part 3: Colour difference - In
...