SIST EN 60838-2-3:2017/A1:2023
(Amendment)Miscellaneous lampholders - Part 2-3: Particular requirements - Lampholders for double-capped linear LED lamps (IEC 60838-2-3:2016/AMD1:2023)
Miscellaneous lampholders - Part 2-3: Particular requirements - Lampholders for double-capped linear LED lamps (IEC 60838-2-3:2016/AMD1:2023)
Sonderfassungen - Teil 2-3: Besondere Anforderungen - Lampenfassungen für zweiseitig gesockelte röhrenförmige LED-Lampen (IEC 60838-2-3:2016/AMD1:2023)
Douilles diverses pour lampes - Partie 2-3: Exigences particulières - Douilles pour lampes LED linéaires à deux culots (IEC 60838-2-3:2016/AMD1:2023)
Različni okovi žarnic in sijalk - 2-3. del: Posebne zahteve - Okovi za linearne module LED z dvema vznožkoma - Dopolnilo A1 (IEC 60838-2-3:2016/AMD1:2023)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60838-2-3:2017/A1:2023
01-september-2023
Različni okovi žarnic in sijalk - 2-3. del: Posebne zahteve - Okovi za linearne
module LED z dvema vznožkoma - Dopolnilo A1 (IEC 60838-2-3:2016/AMD1:2023)
Miscellaneous lampholders - Part 2-3: Particular requirements - Lampholders for double-
capped linear LED lamps (IEC 60838-2-3:2016/AMD1:2023)
Sonderfassungen - Teil 2-3: Besondere Anforderungen - Lampenfassungen für
zweiseitig gesockelte röhrenförmige LED-Lampen (IEC 60838-2-3:2016/AMD1:2023)
Douilles diverses pour lampes - Partie 2-3: Exigences particulières - Douilles pour
lampes LED linéaires à deux culots (IEC 60838-2-3:2016/AMD1:2023)
Ta slovenski standard je istoveten z: EN 60838-2-3:2017/A1:2023
ICS:
29.140.10 Grla in držala žarnic Lamp caps and holders
SIST EN 60838-2-3:2017/A1:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60838-2-3:2017/A1:2023
---------------------- Page: 2 ----------------------
SIST EN 60838-2-3:2017/A1:2023
EUROPEAN STANDARD EN 60838-2-3:2017/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM June 2023
ICS 29.140.10
English Version
Miscellaneous lampholders - Part 2-3: Particular requirements -
Lampholders for double-capped linear LED lamps
(IEC 60838-2-3:2016/AMD1:2023)
Douilles diverses pour lampes - Partie 2-3: Exigences Sonderfassungen - Teil 2-3: Besondere Anforderungen -
particulières - Douilles pour lampes LED linéaires à deux Lampenfassungen für zweiseitig gesockelte röhrenförmige
culots LED-Lampen
(IEC 60838-2-3:2016/AMD1:2023) (IEC 60838-2-3:2016/AMD1:2023)
This amendment A1 modifies the European Standard EN 60838-2-3:2017; it was approved by CENELEC on 2023-05-29. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60838-2-3:2017/A1:2023 E
---------------------- Page: 3 ----------------------
SIST EN 60838-2-3:2017/A1:2023
EN 60838-2-3:2017/A1:2023 (E)
European foreword
The text of document 34B/2150/CDV, future IEC 60838-2-3/AMD1, prepared by SC 34B "Lamp caps
and holders" of IEC/TC 34 "Lighting" was submitted to the IEC-CENELEC parallel vote and approved
by CENELEC as EN 60838-2-3:2017/A1:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-02-29
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-05-29
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60838-2-3:2016/AMD1:2023 was approved by CENELEC
as a European Standard without any modification.
2
---------------------- Page: 4 ----------------------
SIST EN 60838-2-3:2017/A1:2023
IEC 60838-2-3
®
Edition 1.0 2023-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
Miscellaneous lampholders –
Part 2-3: Particular requirements – Lampholders for double-capped linear LED
lamps
Douilles diverses pour lampes –
Partie 2-3: Exigences particulières – Douilles pour lampes LED linéaires à deux
culots
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.140.10 ISBN 978-2-8322-6859-9
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 5 ----------------------
SIST EN 60838-2-3:2017/A1:2023
– 2 – IEC 60838-2-3:2016/AMD1:2023
© IEC 2023
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
MISCELLANEOUS LAMPHOLDERS –
Part 2-3: Particular requirements –
Lampholders for double-capped linear LED lamps
AMENDMENT 1
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
Amendment 1 to IEC 60838-2-3:2016 has been prepared
...
SLOVENSKI STANDARD
SIST EN 60838-2-3:2017/oprA1:2022
01-november-2022
Različni okovi žarnic in sijalk - 2-3. del: Posebne zahteve - Okovi za linearne
module LED z dvema vznožkoma - Dopolnilo A1
Miscellaneous lampholders - Part 2-3: Particular requirements - Lampholders for double-
capped linear LED lamps
Sonderfassungen - Teil 2-3: Besondere Anforderungen - Lampenfassungen für zweiseitig
gesockelte röhrenförmige LED-Lampen
Douilles diverses pour lampes - Partie 2-3: Exigences particulières - Douilles pour
lampes LED linéaires à deux culots
Ta slovenski standard je istoveten z: EN 60838-2-3:2017/prA1:2022
ICS:
29.140.10 Grla in držala žarnic Lamp caps and holders
SIST EN 60838-2-3:2017/oprA1:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60838-2-3:2017/oprA1:2022
---------------------- Page: 2 ----------------------
SIST EN 60838-2-3:2017/oprA1:2022
34B/2150/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60838-2-3/AMD1 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-09-09 2022-12-02
SUPERSEDES DOCUMENTS:
34B/2143/RR
IEC SC 34B : LAMP CAPS AND HOLDERS
SECRETARIAT: SECRETARY:
Germany Mr Hans Finke
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if any,
in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for
Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they
are aware and to provide supporting documentation.
TITLE:
Amendment 1 - Miscellaneous lampholders - Part 2-3: Particular requirements - Lampholders for
double-capped linear LED lamps
PROPOSED STABILITY DATE: 2025
NOTE FROM TC/SC OFFICERS:
Amendment 1 is proposed to amend IEC 60838-2-3 to include GJ6.6 fits based on the previously circulated
34B/2130/DC and the comments received 34B/2133A/INF. The comments have been reviewed and observations
completed on 2022-02-16. Please see 34B/2138/Q and 34B/2142/RQ for the approval of this maintenance.
Copyright © 2022 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
---------------------- Page: 3 ----------------------
SIST EN 60838-2-3:2017/oprA1:2022
IEC CDV 60838-2-3 ©IEC 2022 2 34B/2150/CDV
1 Proposal to amend IEC 60838-2-3 ED1 as follows:
2
3 Clause 5: Add the following clause
4
5 5.2 For a pair of GJ6.6 inflexible lampholders, the axial tolerances shall conform to IEC
6 60061-2 Mounting Distance of a Combined Pair of Inflexible Lampholders sheet 7005-xxx-1.
7
8 Drafting note: The lampholder spacing data sheet number, 7005-xxx-1, will be entered upon completion of the project to amend
9 IEC 60061-2. A
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.