SIST EN ISO 7390:2004

Building construction - Jointing products - Determination of resistance to flow of sealants (ISO 7390:2002)

This International Standard specifies a method for the determination of the resistance to flow of sealants, by loss of cohesion under their own weight. These sealants are used in joints in vertical surfaces in building construction.

Hochbau - Fugendichtstoffe - Bestimmung des Standvermögens (ISO 7390:2002)

Construction immobiliere - Produits pour joints - Détermination de la résistance au coulage des mastics (ISO 7390:2002)

L'ISO 7390:2002 prescrit une méthode pour la détermination de la résistance au coulage de mastics, par perte de cohésion sous leur propre poids. Ces mastics sont utilisés dans des joints à surfaces verticales en construction immobilière.

Gradnja objektov - Sredstva za stikovanje - Ugotavljanje odpornosti proti tečenju za tesnilne mase (ISO 7390:2002)

General Information

• Status: Published
• Publication Date: 31-Mar-2004
• ICS: 91.100.50 - Binders. Sealing materials
• Technical Committee: ISS SPL.GPO - Building construction
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Apr-2004
• Due Date: 01-Apr-2004
• Completion Date: 01-Apr-2004
• Ref Project: EN ISO 7390:2003 - Building construction - Jointing products - Determination of resistance to flow of sealants (ISO 7390:2003)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 7390:2004
01-april-2004
1DGRPHãþD
SIST EN 27390:1996
*UDGQMDREMHNWRY6UHGVWYD]DVWLNRYDQMH8JRWDYOMDQMHRGSRUQRVWLSURWLWHþHQMX
]DWHVQLOQHPDVH,62
Building construction - Jointing products - Determination of resistance to flow of sealants
(ISO 7390:2002)
Hochbau - Fugendichtstoffe - Bestimmung des Standvermögens (ISO 7390:2002)
Construction immobiliere - Produits pour joints - Détermination de la résistance au
coulage des mastics (ISO 7390:2002)
Ta slovenski standard je istoveten z: EN ISO 7390:2003
ICS:
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
SIST EN ISO 7390:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 7390:2004

---------------------- Page: 2 ----------------------

SIST EN ISO 7390:2004
EUROPEAN STANDARD
EN ISO 7390
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2003
ICS 91.100.50 Supersedes EN 27390:1990
English version
Building construction - Jointing products - Determination of
resistance to flow of sealants (ISO 7390:2003)
Construction immobilière - Produits pour joints - Hochbau - Fugendichtstoffe - Bestimmung des
Détermination de la résistance au coulage des mastics Standvermögens (ISO 7390:2002)
(ISO 7390:2003)
This European Standard was approved by CEN on 25 September 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7390:2003 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 7390:2004
EN ISO 7390:2003 (E)
Foreword
The text of ISO 7390:2002 has been prepared by Technical Committee ISO/TC 59 "Building
construction” of the International Organization for Standardization (ISO) and has been taken
over as EN ISO 7390:2003 by CMC.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by May 2004, and conflicting national standards
shall be withdrawn at the latest by May 2004.
This document supersedes EN 27390:1990.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and
the United Kingdom.
Endorsement notice
The text of ISO 7390:2002 has been approved by CEN as EN ISO 7390:2003 without any
modifications.
NOTE Normative references to International Standards are listed in Annex ZA (normative).
2

---------------------- Page: 4 ----------------------

SIST EN ISO 7390:2004
EN ISO 7390:2003 (E)
Annex ZA
(normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of
any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE Where an International Publication has been modified by common modifications, indicated
by (mod.), the relevant EN/HD applies.
Publication Year Title EN Year
ISO 6927 1981 Building construction - Jointing EN ISO 26927 1990
products - Sealants – Vocabulary
3

---------------------- Page: 5 ----------------------

SIST EN ISO 7390:2004

---------------------- Page: 6 ----------------------

SIST EN ISO 7390:2004
INTERNATIONAL ISO
STANDARD 7390
Third edition
2002-10-01
Building construction — Jointing
products — Determination of resistance to
flow of sealants
Construction immobilière — Produits pour joints — Détermination de la
résistance au coulage des mastics

Reference number
ISO 7390:2002(E)
© ISO 2002

---------------------- Page: 7 ----------------------

SIST EN ISO 7390:2004
ISO 7390:2002(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be
edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file,
parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2002
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's
member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.ch
Printed in Switzerland
©
ii ISO 2002 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 7390:2004
ISO 7390:2002(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the Internatio
...