oSIST prEN 4500-006:2022

Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 6: Specific rules for filler metals for brazing

The EN 4500 series specifies the rules for the drafting and presentation of metallic material standards for aerospace applications. This Part 006 specifies the "Specific rules for filler metals for brazing".

Luft- und Raumfahrt - Metallische Werkstoffe - Regeln für das Erstellen und die Gestaltung von Werkstoffnormen - Teil 6: Besondere Regeln für Hartlote

No Scope available

Série aérospatiale - Matériaux métalliques - Règles pour la rédaction et la présentation des normes de matériaux - Partie 006: Règles spécifiques aux métaux d’apport de brasage

La série EN 4500 spécifie les règles pour la rédaction et la présentation des normes de matériaux métalliques pour les applications aérospatiales. La présente Partie 006 spécifie les « Règles spécifiques aux métaux d'apport de brasage ».

Aeronavtika - Kovinski materiali - Pravila za načrtovanje in predstavljanje standardov za materiale - 6. del: Posebna pravila za kovinska polnila za spajkanje

General Information

• Status: Not Published
• Public Enquiry End Date: 31-Jan-2022
• ICS: 25.160.20 - Welding consumables
• ICS: 49.025.05 - Ferrous alloys in general
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 24-Nov-2021
• Due Date: 13-Apr-2022
• Completion Date: 03-Feb-2022
• Ref Project: FprEN 4500-006 - Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 006: Specific rules for filler metals for brazing

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 4500-006:2022
01-januar-2022
Aeronavtika - Kovinski materiali - Pravila za načrtovanje in predstavljanje
standardov za materiale - 6. del: Posebna pravila za kovinska polnila za spajkanje
Aerospace series - Metallic materials - Rules for drafting and presentation of material
standards - Part 6: Specific rules for filler metals for brazing
Luft- und Raumfahrt - Metallische Werkstoffe - Regeln für das Erstellen und die
Gestaltung von Werkstoffnormen - Teil 6: Besondere Regeln für Hartlote
Série aérospatiale - Matériaux métalliques - Règles pour la rédaction et la présentation
des normes de matériaux - Partie 006: Règles spécifiques aux métaux d’apport de
brasage
Ta slovenski standard je istoveten z: prEN 4500-006
ICS:
25.160.20 Potrošni material pri varjenju Welding consumables
49.025.05 Železove zlitine na splošno Ferrous alloys in general
oSIST prEN 4500-006:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 4500-006:2022

---------------------- Page: 2 ----------------------
oSIST prEN 4500-006:2022


DRAFT
EUROPEAN STANDARD
prEN 4500-006
NORME EUROPÉENNE

EUROPÄISCHE NORM

November 2021
ICS
English Version

Aerospace series - Metallic materials - Rules for drafting
and presentation of material standards - Part 6: Specific
rules for filler metals for brazing
Série aérospatiale - Matériaux métalliques - Règles Luft- und Raumfahrt - Metallische Werkstoffe - Regeln
pour la rédaction et la présentation des normes de für das Erstellen und die Gestaltung von
matériaux - Partie 006: Règles spécifiques aux métaux Werkstoffnormen - Teil 6: Besondere Regeln für
d'apport de brasage Hartlote
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4500-006:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 4500-006:2022
prEN 4500-006:2021 (E)
Contents Page

European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Rules for drafting a European Standard for aerospace metallic materials . 6
4.1 General. 6
4.2 Title .
...