SIST EN ISO 8666:2021/A11:2021

Small craft - Principal data (ISO 8666:2020)

Kleine Wasserfahrzeuge - Hauptdaten (ISO 8666:2020)

Petits navires - Données principales (ISO 8666:2020)

Mala plovila - Osnovni podatki - Dopolnilo A11 (ISO 8666:2020)

General Information

• Status: Published
• Publication Date: 14-Nov-2021
• ICS: 47.080 - Small craft
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 03-Nov-2021
• Due Date: 08-Jan-2022
• Completion Date: 15-Nov-2021
• Directive: 2013/53/EU - Directive 2013/53/EU of the European Parliament and of the Council of 20 November 2013 on recreational craft and personal watercraft and repealing Directive 94/25/EC
• Mandate: M/542 - [C(2015)8736] Standardisation Request to the European Committee for Standardisation and the European Committee for Electro-technical Standardisation as regards recreational craft and personal watercraft in support of Directive 2013/53/EU of the European Parliament and of the Council of 20 November 2013 on recreational craft and personal watercraft and repealing Directive 94/25/EC.
• Ref Project: EN ISO 8666:2020/A11:2021 - Small craft - Principal data (ISO 8666:2020)

Relations

• Amends: SIST EN ISO 8666:2021 - Small craft - Principal data (ISO 8666:2020)
• Effective Date: 29-Sep-2021

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2021
Mala plovila - Osnovni podatki - Dopolnilo A11 (ISO 8666:2020)
Small craft - Principal data (ISO 8666:2020)
Kleine Wasserfahrzeuge - Hauptdaten (ISO 8666:2020)
Petits navires - Données principales (ISO 8666:2020)
Ta slovenski standard je istoveten z: EN ISO 8666:2020/A11:2021
ICS:
47.080 Čolni Small craft
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 8666:2020/A11
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2021
EUROPÄISCHE NORM
ICS 47.080
English Version
Small craft - Principal data (ISO 8666:2020)
Petits navires - Données principales (ISO 8666:2020) Kleine Wasserfahrzeuge - Hauptdaten (ISO 8666:2020)
This amendment A11 modifies the European Standard EN ISO 8666:2020; it was approved by CEN on 8 September 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8666:2020/A11:2021 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2013/53/EU aimed to be covered . 4

European foreword
This document (EN ISO 8666:2020/A11:2021) has been prepared by Technical Committee CEN/TC 464
“Water analysis” the secretariat of which is held by SIS.
This Amendment to the European Standard EN ISO 8666:2020 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by April 2022, and
conflicting national standards shall be withdrawn at the latest by April 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document has been prepared under a Standardization Request given to CEN by the European
Commission and the European Free Trade Association, and supports essential requirements of EU
Directive(s) / Regulation(s).
For the relationship with EU Directive(s) / Regulation(s), see informative Annex ZA, which is an integral
part of this document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, B
...